Fita de LED 5050 RGBW PU (#5326-PU)

Visão Geral

A Fita de LED 5050 RGBW PU | 14mm | 24V | 60LEDs | 100mm/cut | #5326-PU faz parte da série de Fitas SMD de Grau Marítimo da DENO, desenvolvida para Fita de LED de grau marítimo. Especificações principais: 5050, 60, 24V, 12 PCB, FPCB de cobre de 3oz, cortável a cada 6LEDs/100mm. Cada rolo é produzido na linha rolo a rolo da DENO com FPCB de cobre com pureza de 99.9% e é fornecido em conformidade com CE, UL e RoHS para projetos de arquitetura, varejo e hotelaria. Configurações OEM e ODM de comprimento, temperatura de cor e impermeabilização estão disponíveis mediante solicitação.

Descrição

Chips 5050 RGBW integrados 4 em 1 proporcionam mistura dinâmica de cores vibrantes e tons de branco nítidos em um amplo ângulo de feixe de 120 graus para iluminação arquitetônica. O encapsulamento durável em poliuretano veda completamente os componentes internos contra a entrada de água e poeira, mantendo alta resistência à radiação UV e às variações de temperatura de operação. Projetada com uma robusta PCB de cobre de 3oz, esta Fita de LED de tensão constante de 24V oferece desempenho estável com pontos de corte precisos a cada 100mm. Esta Fita de LED PU é ideal para iluminação de fachadas e paisagismo, disponível com suporte confiável para fornecimento no atacado para projetos.

Especificações

Aplicações

• Cove, wall-wash & perimeter lighting — Coves, recesses, wall-wash details and ceiling perimeters where a continuous, uniform line of light is required.
• Showroom & hospitality display lighting — Shelving, display cases, reception desks and signage backlighting in shops, showrooms and hospitality spaces.
• Kitchen & wardrobe under-cabinet lighting — Kitchen, wardrobe and furniture task lighting where the strip stays hidden and only the light is seen.
• Entertainment & media-facade colour scenes — Entertainment venues, media facades, gaming rooms and branded retail installs driven by DMX/SPI or standard RGB controllers.

Acessórios recomendados e peças compatíveis

• DL-1201 — 25x14.5mm Wide Surface Mount LED Channel — Aluminum Profile for 12mm Strip: Accepts LED strips up to 12mm wide.
• DL-1202 — 17.3x14.5mm Surface Mount LED Channel — Deep Aluminum Profile for 12mm Strip: Accepts LED strips up to 12mm wide.
• DL-1204 — 25x7mm Wide Slim Surface Mount LED Channel — Dotless Aluminum Profile for 240 LEDs/m: Accepts LED strips up to 12mm wide.
• DN-PSU-100 — 24V 100W Class-2 LED Driver · High Efficiency: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
• DN-PSU-150 — 24V 150W Class-2 LED Driver · Premium: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
• DN-PSU-60 — 24V 60W Class-2 LED Driver · Constant Voltage: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
• V4 — 12-48VDC 4-Channel * 5A RF+Push Dimming RGBW Controller | V4: Matched by input voltage range and colour channels.

High-Power LED Strip: Heat Dissipation & Aluminum Channel Guide

At up to 19.2W/m, 5326-PU is a high-power SMD LED strip. Above roughly 14.4W/m the tape can no longer shed its own heat through the FPC alone — an aluminum channel is part of the luminaire, not an accessory.

Why high-wattage strips need a heat sink

• Aluminum conducts heat roughly 30× faster than the plastics, MDF or gypsum a strip is usually stuck to, so a bare high-power run traps heat under the tape.
• LED lifetime (LM-80 / TM-21) is driven by solder-point temperature Tc. Keeping Tc inside the datasheet limit — DENO strips are rated Tc ≤ 75°C — is what preserves the rated L70 lifetime and colour stability.
• Never run 14.4W/m or more coiled on the reel, inside a sealed plastic diffuser, or directly on wood, wallpaper or foam.

Sizing rule: FPC width vs channel inner width

• Channel inner width ≥ FPC width + 2mm. This strip is 12mm wide, so it needs at least 14mm of inner width.
• The 2mm clearance absorbs extrusion tolerance and lets the tape be seated or replaced without scraping the side walls or the wiring.
• A frosted or opal PC cover then diffuses the higher lumen output into an even, dot-free line instead of visible hot spots.

Aluminum channels that fit this strip

• Perfil de Alumínio Fino de Sobrepor · PCB de 12mm · fits ≤12mm strip
• Canal Fino para LED de Sobrepor de 17.5x7mm · fits ≤12mm strip
• Canaleta de LED Larga e Fina de Sobrepor 25x7mm · fits ≤12mm strip
• Canal para LED de Sobrepor de 17.3x14.5mm · fits ≤12mm strip
• Canal magnético para LED de 18x18mm · fits ≤12mm strip
• Canaleta de LED larga de sobrepor 25x14.5mm · fits ≤12mm strip

Recommended LED Channels

Mount this LED strip in a DENO LED aluminum profile for heat dissipation, physical protection and diffused, dot-free output.

This strip is 12mm wide, so it needs a channel with at least 14mm inner width (12mm + 2mm clearance). Every profile below meets that.

• Perfil de Alumínio Fino de Sobrepor · PCB de 12mm · fits ≤12mm strip
• Canal Fino para LED de Sobrepor de 17.5x7mm · fits ≤12mm strip
• Canaleta de LED Larga e Fina de Sobrepor 25x7mm · fits ≤12mm strip
• Canal para LED de Sobrepor de 17.3x14.5mm · fits ≤12mm strip

Modelos relacionados nesta série

• Fita de LED RGB Digital 5050. (#16029)
• Fita de LED 5050 RGB (#1495)
• Fita de LED 5050 RGBW (#2432)
• Fita de LED 5050 RGB PU (#1495-PU)
• Fita de LED 5050 RGBW (#3097)
• Fita de LED 5050 RGBWW (#11341)
• Fita de LED 5050 RGBW (#7828)
• Fita de LED 5050 RGB (#4525)

See every model in SMD LED Strip Series or narrow to 5050. Compare wattage, lumen output and run length in the ProCalc parameter library, or request OEM/ODM pricing on the custom manufacturing page.

Perguntas Frequentes