Fita de LED 5050 RGB PU (#1495-PU)

Visão Geral

Fita de LED 5050 RGB PU | 12mm | 24V | 60LEDs | 100mm/corte | #1495-PU faz parte da série de Fitas SMD de Grau Marítimo da DENO, desenvolvida com foco em Fita de LED de grau marítimo. Principais especificações: 5050, 60, 24V, PCB 12, FPCB com cobre de 2oz, corte a cada 6LEDs/100mm. Cada rolo é produzido na linha roll-to-roll da DENO com FPCB de cobre com pureza de 99.9% e é fornecido em conformidade com CE, UL e RoHS para projetos arquitetônicos, de varejo e de hotelaria. Configurações OEM e ODM de comprimento, temperatura de cor e impermeabilização estão disponíveis mediante solicitação.

Descrição

Os LEDs 5050 RGB de três chips proporcionam mistura dinâmica e suave de cores com um amplo ângulo de abertura de 120 graus em uma placa de circuito flexível de 12mm. O encapsulamento durável de poliuretano oferece vedação robusta contra água e exposição UV em temperaturas de operação de -25°C a 40°C. Projetada com folha de cobre de 2oz em um circuito de tensão constante de 24V, esta Fita de LED dimerizável permite cortes a cada 100mm. Otimizada para iluminação comercial de sancas e sinalização externa, cada Fita de LED 5050 RGB PU está disponível para fornecimento de projetos no atacado.

Especificações

Aplicações

• Cove, wall-wash & perimeter lighting — Coves, recesses, wall-wash details and ceiling perimeters where a continuous, uniform line of light is required.
• Showroom & hospitality display lighting — Shelving, display cases, reception desks and signage backlighting in shops, showrooms and hospitality spaces.
• Kitchen & wardrobe under-cabinet lighting — Kitchen, wardrobe and furniture task lighting where the strip stays hidden and only the light is seen.
• Entertainment & media-facade colour scenes — Entertainment venues, media facades, gaming rooms and branded retail installs driven by DMX/SPI or standard RGB controllers.

Acessórios recomendados e peças compatíveis

• DL-1201 — 25x14.5mm Wide Surface Mount LED Channel — Aluminum Profile for 12mm Strip: Accepts LED strips up to 12mm wide.
• DL-1202 — 17.3x14.5mm Surface Mount LED Channel — Deep Aluminum Profile for 12mm Strip: Accepts LED strips up to 12mm wide.
• DL-1204 — 25x7mm Wide Slim Surface Mount LED Channel — Dotless Aluminum Profile for 240 LEDs/m: Accepts LED strips up to 12mm wide.
• DN-PSU-100 — 24V 100W Class-2 LED Driver · High Efficiency: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
• DN-PSU-150 — 24V 150W Class-2 LED Driver · Premium: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
• DN-PSU-60 — 24V 60W Class-2 LED Driver · Constant Voltage: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.

High-Power LED Strip: Heat Dissipation & Aluminum Channel Guide

At up to 14.4W/m, 1495-PU is a high-power SMD LED strip. Above roughly 14.4W/m the tape can no longer shed its own heat through the FPC alone — an aluminum channel is part of the luminaire, not an accessory.

Why high-wattage strips need a heat sink

• Aluminum conducts heat roughly 30× faster than the plastics, MDF or gypsum a strip is usually stuck to, so a bare high-power run traps heat under the tape.
• LED lifetime (LM-80 / TM-21) is driven by solder-point temperature Tc. Keeping Tc inside the datasheet limit — DENO strips are rated Tc ≤ 75°C — is what preserves the rated L70 lifetime and colour stability.
• Never run 14.4W/m or more coiled on the reel, inside a sealed plastic diffuser, or directly on wood, wallpaper or foam.

Sizing rule: FPC width vs channel inner width

• Channel inner width ≥ FPC width + 2mm. This strip is 12mm wide, so it needs at least 14mm of inner width.
• The 2mm clearance absorbs extrusion tolerance and lets the tape be seated or replaced without scraping the side walls or the wiring.
• A frosted or opal PC cover then diffuses the higher lumen output into an even, dot-free line instead of visible hot spots.

Aluminum channels that fit this strip

• Perfil de Alumínio Fino de Sobrepor · PCB de 12mm · fits ≤12mm strip
• Canal Fino para LED de Sobrepor de 17.5x7mm · fits ≤12mm strip
• Canaleta de LED Larga e Fina de Sobrepor 25x7mm · fits ≤12mm strip
• Canal para LED de Sobrepor de 17.3x14.5mm · fits ≤12mm strip
• Canal magnético para LED de 18x18mm · fits ≤12mm strip
• Canaleta de LED larga de sobrepor 25x14.5mm · fits ≤12mm strip

Recommended LED Channels

Mount this LED strip in a DENO LED aluminum profile for heat dissipation, physical protection and diffused, dot-free output.

This strip is 12mm wide, so it needs a channel with at least 14mm inner width (12mm + 2mm clearance). Every profile below meets that.

• Perfil de Alumínio Fino de Sobrepor · PCB de 12mm · fits ≤12mm strip
• Canal Fino para LED de Sobrepor de 17.5x7mm · fits ≤12mm strip
• Canaleta de LED Larga e Fina de Sobrepor 25x7mm · fits ≤12mm strip
• Canal para LED de Sobrepor de 17.3x14.5mm · fits ≤12mm strip

Modelos relacionados nesta série

• Fita de LED RGB Digital 5050. (#16029)
• Fita de LED 5050 RGB (#1495)
• Fita de LED 5050 RGBW PU (#5326-PU)
• Fita de LED 5050 RGBW (#3097)
• Fita de LED 5050 RGBW (#2432)
• Fita de LED 5050 RGBWW (#11341)
• Fita de LED 5050 RGBW (#7828)
• Fita de LED 5050 RGB (#4525)

See every model in SMD LED Strip Series or narrow to 5050. Compare wattage, lumen output and run length in the ProCalc parameter library, or request OEM/ODM pricing on the custom manufacturing page.

Perguntas Frequentes