Fita de LED RGB Digital 5050. (#16029)

Visão Geral

Fita de LED RGB Digital 5050. | 10mm | 24V | 72LEDs | 83.333mm/corte | #16029 faz parte da série DENO Pixel SMD Strips, desenvolvida com base em Fita de LED com pixels endereçáveis. Principais especificações: 5050, 72, 24V, PCB de 10, FPCB com cobre de 3oz, corte a cada 6LEDs/83.333mm. Cada rolo é produzido na linha rolo a rolo da DENO com FPCB de cobre com pureza de 99.9% e fornecido em conformidade com CE, UL e RoHS para projetos arquitetônicos, de varejo e de hotelaria. Configurações OEM e ODM de comprimento, temperatura de cor e impermeabilização estão disponíveis sob consulta.

Descrição

Projetada com 72 LEDs por metro, esta Fita de LED RGB digital 5050 de 24V oferece controle de pixels endereçáveis em grupos de 6 LEDs por seção de corte de 83.333mm. Construída sobre uma PCB durável de cobre de 3oz e 10mm, a configuração de corrente constante assegura desempenho estável em trechos de até 5m para fornecimento no atacado para projetos. Esta fita endereçável dimerizável é totalmente compatível com controladores RGB SPI padrão para oferecer efeitos dinâmicos de cores em sequência, ajustes de brilho e de modo. Obtenha difusão luminosa contínua e sem pontos visíveis em instalações de iluminação arquitetônica com um perfil de profundidade mínima de 15mm combinado com um difusor.

Especificações

Aplicações

• Cove, wall-wash & perimeter lighting — Coves, recesses, wall-wash details and ceiling perimeters where a continuous, uniform line of light is required.
• Showroom & hospitality display lighting — Shelving, display cases, reception desks and signage backlighting in shops, showrooms and hospitality spaces.
• Kitchen & wardrobe under-cabinet lighting — Kitchen, wardrobe and furniture task lighting where the strip stays hidden and only the light is seen.
• Entertainment & media-facade colour scenes — Entertainment venues, media facades, gaming rooms and branded retail installs driven by DMX/SPI or standard RGB controllers.

Acessórios recomendados e peças compatíveis

• DL-1003 — 19.1x8mm Surface Mount LED Channel — Dotless Aluminum Profile for 240 LEDs/m Strip: Accepts LED strips up to 10mm wide.
• DL-1103-1 — 16x13mm Surface Mount LED Channel — Aluminum Profile for 10mm LED Strip: Accepts LED strips up to 10mm wide.
• DL-1510 HX-F — 15x9.9mm Recessed LED Channel with Flange — Flush Mount Aluminum Profile: Accepts LED strips up to 10mm wide.
• DN-PSU-100 — 24V 100W Class-2 LED Driver · High Efficiency: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
• DN-PSU-150 — 24V 150W Class-2 LED Driver · Premium: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
• DN-PSU-60 — 24V 60W Class-2 LED Driver · Constant Voltage: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.

High-Power LED Strip: Heat Dissipation & Aluminum Channel Guide

At up to 18W/m, 16029 is a high-power SMD LED strip. Above roughly 14.4W/m the tape can no longer shed its own heat through the FPC alone — an aluminum channel is part of the luminaire, not an accessory.

Why high-wattage strips need a heat sink

• Aluminum conducts heat roughly 30× faster than the plastics, MDF or gypsum a strip is usually stuck to, so a bare high-power run traps heat under the tape.
• LED lifetime (LM-80 / TM-21) is driven by solder-point temperature Tc. Keeping Tc inside the datasheet limit — DENO strips are rated Tc ≤ 75°C — is what preserves the rated L70 lifetime and colour stability.
• Never run 14.4W/m or more coiled on the reel, inside a sealed plastic diffuser, or directly on wood, wallpaper or foam.

Sizing rule: FPC width vs channel inner width

• Channel inner width ≥ FPC width + 2mm. This strip is 10mm wide, so it needs at least 12mm of inner width.
• The 2mm clearance absorbs extrusion tolerance and lets the tape be seated or replaced without scraping the side walls or the wiring.
• A frosted or opal PC cover then diffuses the higher lumen output into an even, dot-free line instead of visible hot spots.

Aluminum channels that fit this strip

• Canal de LED de Embutir de 22x12mm com Aba · fits ≤10mm strip
• Canal de LED de Embutir de 15x9.9mm com Aba · fits ≤10mm strip
• Canal de LED de embutir raso de 17x7mm com aba · fits ≤10mm strip
• Canaleta para LED de sobrepor 17x15mm · fits ≤10mm strip
• Canal de LED para Sobrepor de 16x13mm · fits ≤10mm strip
• Canaleta larga para LED de sobrepor 20x15mm · fits ≤10mm strip

Recommended LED Channels

Mount this LED strip in a DENO LED aluminum profile for heat dissipation, physical protection and diffused, dot-free output.

This strip is 10mm wide, so it needs a channel with at least 12mm inner width (10mm + 2mm clearance). Every profile below meets that.

• Canal de LED de Embutir de 22x12mm com Aba · fits ≤10mm strip
• Canal de LED de Embutir de 15x9.9mm com Aba · fits ≤10mm strip
• Canal de LED de embutir raso de 17x7mm com aba · fits ≤10mm strip
• Canaleta para LED de sobrepor 17x15mm · fits ≤10mm strip

Modelos relacionados nesta série

• Fita de LED 5050 RGB PU (#1495-PU)
• Fita de LED 5050 RGB (#1495)
• Fita de LED 5050 RGBW (#2432)
• Fita de LED 5050 RGBW PU (#5326-PU)
• Fita de LED 5050 RGBW (#3097)
• Fita de LED 5050 RGBW (#7828)
• Fita de LED 5050 RGBWW (#11341)
• Fita de LED 5050 RGB (#4525)

See every model in SMD LED Strip Series or narrow to 5050. Compare wattage, lumen output and run length in the ProCalc parameter library, or request OEM/ODM pricing on the custom manufacturing page.

Perguntas Frequentes