Fita de LED 5050 RGBW (#3097)

Visão Geral

Fita de LED 5050 RGBW | 12mm | 12V | 72LEDs | 83.33mm/corte | #3097 faz parte da série de Fitas SMD RGBW da DENO, desenvolvida com base em Fitas de LED RGBW. Especificações principais: 5050, 72, 12V, 12 PCB, FPCB com cobre de 2oz, cortável a cada 6LEDs/83.33mm. Cada rolo é produzido na linha rolo a rolo da DENO com FPCB de cobre com pureza de 99.9% e é fornecido em conformidade com CE, UL e RoHS para projetos de arquitetura, varejo e hotelaria. Configurações OEM e ODM de comprimento, temperatura de cor e impermeabilização estão disponíveis mediante solicitação.

Descrição

Esta Fita de LED 5050 RGBW integra chips quatro em um para produzir cores dinâmicas intensas e tons pastéis suaves em projetos de iluminação arquitetônica. Construído em uma PCB de cobre de 2oz com 12mm de largura, o circuito de tensão constante de 12V garante desempenho elétrico estável em trechos de até 5 metros. Com 72 LEDs por metro e amplo ângulo de abertura de 120 graus, a fita pode ser cortada a cada 83.33mm para instalação precisa no local. LEDs 5050 SMD de alta qualidade com estruturas robustas de terminais de cobre proporcionam dimerização confiável em toda a faixa em instalações comerciais dinâmicas. A fabricação direta da fábrica atende ao fornecimento no atacado para projetos, com classificação por bin consistente, ajustada para parceiros OEM e empresas instaladoras de iluminação.

Especificações

Aplicações

• Cove, wall-wash & perimeter lighting — Coves, recesses, wall-wash details and ceiling perimeters where a continuous, uniform line of light is required.
• Showroom & hospitality display lighting — Shelving, display cases, reception desks and signage backlighting in shops, showrooms and hospitality spaces.
• Kitchen & wardrobe under-cabinet lighting — Kitchen, wardrobe and furniture task lighting where the strip stays hidden and only the light is seen.
• Entertainment & media-facade colour scenes — Entertainment venues, media facades, gaming rooms and branded retail installs driven by DMX/SPI or standard RGB controllers.

Acessórios recomendados e peças compatíveis

• DL-1201 — 25x14.5mm Wide Surface Mount LED Channel — Aluminum Profile for 12mm Strip: Accepts LED strips up to 12mm wide.
• DL-1202 — 17.3x14.5mm Surface Mount LED Channel — Deep Aluminum Profile for 12mm Strip: Accepts LED strips up to 12mm wide.
• DL-1204 — 25x7mm Wide Slim Surface Mount LED Channel — Dotless Aluminum Profile for 240 LEDs/m: Accepts LED strips up to 12mm wide.
• V4 — 12-48VDC 4-Channel * 5A RF+Push Dimming RGBW Controller | V4: Matched by input voltage range and colour channels.

High-Power LED Strip: Heat Dissipation & Aluminum Channel Guide

At up to 17.2W/m, 3097 is a high-power SMD LED strip. Above roughly 14.4W/m the tape can no longer shed its own heat through the FPC alone — an aluminum channel is part of the luminaire, not an accessory.

Why high-wattage strips need a heat sink

• Aluminum conducts heat roughly 30× faster than the plastics, MDF or gypsum a strip is usually stuck to, so a bare high-power run traps heat under the tape.
• LED lifetime (LM-80 / TM-21) is driven by solder-point temperature Tc. Keeping Tc inside the datasheet limit — DENO strips are rated Tc ≤ 75°C — is what preserves the rated L70 lifetime and colour stability.
• Never run 14.4W/m or more coiled on the reel, inside a sealed plastic diffuser, or directly on wood, wallpaper or foam.

Sizing rule: FPC width vs channel inner width

• Channel inner width ≥ FPC width + 2mm. This strip is 12mm wide, so it needs at least 14mm of inner width.
• The 2mm clearance absorbs extrusion tolerance and lets the tape be seated or replaced without scraping the side walls or the wiring.
• A frosted or opal PC cover then diffuses the higher lumen output into an even, dot-free line instead of visible hot spots.

Aluminum channels that fit this strip

• Perfil de Alumínio Fino de Sobrepor · PCB de 12mm · fits ≤12mm strip
• Canal Fino para LED de Sobrepor de 17.5x7mm · fits ≤12mm strip
• Canaleta de LED Larga e Fina de Sobrepor 25x7mm · fits ≤12mm strip
• Canal para LED de Sobrepor de 17.3x14.5mm · fits ≤12mm strip
• Canal magnético para LED de 18x18mm · fits ≤12mm strip
• Canaleta de LED larga de sobrepor 25x14.5mm · fits ≤12mm strip

Recommended LED Channels

Mount this LED strip in a DENO LED aluminum profile for heat dissipation, physical protection and diffused, dot-free output.

This strip is 12mm wide, so it needs a channel with at least 14mm inner width (12mm + 2mm clearance). Every profile below meets that.

• Perfil de Alumínio Fino de Sobrepor · PCB de 12mm · fits ≤12mm strip
• Canal Fino para LED de Sobrepor de 17.5x7mm · fits ≤12mm strip
• Canaleta de LED Larga e Fina de Sobrepor 25x7mm · fits ≤12mm strip
• Canal para LED de Sobrepor de 17.3x14.5mm · fits ≤12mm strip

Modelos relacionados nesta série

• Fita de LED RGB Digital 5050. (#16029)
• Fita de LED 5050 RGB (#1495)
• Fita de LED 5050 RGBW PU (#5326-PU)
• Fita de LED 5050 RGB PU (#1495-PU)
• Fita de LED 5050 RGBW (#2432)
• Fita de LED 5050 RGBWW (#11341)
• Fita de LED 5050 RGBW (#7828)
• Fita de LED 5050 RGB (#4525)

See every model in SMD LED Strip Series or narrow to 5050. Compare wattage, lumen output and run length in the ProCalc parameter library, or request OEM/ODM pricing on the custom manufacturing page.

Perguntas Frequentes