What counts as a high efficiency LED strip in lumens per watt?

In 2026 a mainstream 24V 2835 board sits around 120-140 lm/W. A high efficiency LED strip starts at roughly 160 lm/W and DENO's top binned 2835 and 2110 boards are measured at up to 200 lm/W at 4000K Ra 80, LM-79 tested at 25 degrees Celsius. The figure is light-source efficacy of the tape itself, measured without the driver, which is exactly how the ErP energy label is calculated.

What is the difference between high efficiency and high efficacy LED strip lights?

They describe the same measurement. Efficacy is the engineering term for lumens delivered per watt consumed; efficiency is how buyers and tender documents usually phrase it. DENO publishes lm/W per model so both audiences read the same number, and the ErP energy class printed on the reel is derived from it.

Which ErP energy class can a high efficiency LED strip reach?

Class C is achievable on the best-binned 2835 and 2110 boards above 180 lm/W, class D covers the 160-180 lm/W band and most well-specified architectural tape lands in class E. High-CRI 95+ and full spectrum builds drop one or two classes because phosphor conversion costs lumens. Every DENO datasheet states the measured class so it can be reproduced by a notified body.

Does a high efficiency LED strip run cooler and last longer?

Yes. Fewer watts per lumen means less heat into the FPCB, so junction temperature drops and L70 lifetime extends. Combined with 2 oz copper and a 99.9% pure copper foil the same brightness can be produced at 20-30% lower wattage, which also lets a single driver feed a longer run and keeps aluminium profiles below the touch-temperature limits used in hospitality projects.

How much energy does a high efficiency LED strip save on a large project?

Take 500 m of cove lighting at 10 hours a day. A 130 lm/W board delivering 1000 lm/m draws about 7.7 W/m; a 190 lm/W board delivers the same output at about 5.3 W/m. Across 500 m that is 1.2 kW saved, roughly 4,380 kWh a year, and it usually removes one driver and one circuit from the electrical schedule as well.

Can I get a high efficiency LED strip in 12V, 24V, 36V or 48V?

24V is the efficiency sweet spot and carries the full binned range. 12V is available where fixture space or existing drivers dictate it, at the cost of shorter single-feed runs. 36V and 48V constant-current boards keep the same lm/W while extending a single feed well past 20 m, which is where the real system efficiency gain shows up on long architectural lines.

Fita de LED 2835 de Alto Fluxo Luminoso, Alta Eficácia Luminosa e Alta Densidade (#5289)

12mm · 24V · 192LEDs · 41.66corte

Model: 5289

5289 12mm | 24V | 192LEDs | 41.66corte | #5289 | Fita de LED 2835 de Alto Fluxo Luminoso, Alta Eficácia Luminosa e Alta Densidade — 24V, cuttable every 41.7mm, 12mm FPCB width, 2835 LEDs, 192 LEDs/m, IP20

Visão Geral

12mm | 24V | 192LEDs | 41.66cut | #5289 | A Fita de LED 2835 de Alto Fluxo Luminoso, Alta Eficácia Luminosa e Alta Densidade faz parte da série de Fitas C.C. SMD (Reguladas por IC) da DENO, desenvolvida com base em uma Fita de LED com IC de corrente constante. Especificações principais: 2835, 192 LEDs/m, 24V, PCB de 12mm, FPCB com cobre de 3 oz, corte a cada 8LEDs/41.66mm. Cada rolo é produzido na linha rolo a rolo da DENO com FPCB de cobre com pureza de 99.9% e fornecido em conformidade com CE, UL e RoHS para projetos de arquitetura, varejo e hotelaria. Configurações OEM e ODM de comprimento, temperatura de cor e impermeabilização estão disponíveis sob consulta.

Descrição

Com 192 LEDs por metro em uma PCB de 12mm, esta Fita de LED 2835 de Alta Densidade proporciona iluminação uniforme para projetos de iluminação arquitetônica. Projetada com um circuito de corrente constante e uma espessa folha de cobre de 3 oz, a fita de 24V garante distribuição estável de corrente ao longo de trechos de até 5m. O encapsulamento SMD 2835 de alta qualidade utiliza estruturas de terminais de cobre puro e fio de ouro de 99.9% de pureza para aumentar a durabilidade em ambientes comerciais exigentes. Cada unidade de corte de 41.66mm, contendo 8 LEDs, permite operação dimerizável e personalização diretamente da fábrica para atender às necessidades de fornecimento de projetos no atacado. Projetada com ângulo de abertura de 120 graus e diâmetro mínimo de curvatura de 60mm, a fita opera de forma confiável em temperaturas de -25°C a 40°C.

We use 99.99% gold wire, large-size chips, and thickened FPCB, backed by a 5-year warranty.

Especificações

CRI	Ra>80 / Ra>90 / Ra>95
POWER (W/M)	15.6 W/m
LED QTY	192 LEDs/m
PART NO	DL-F28A96V24-5289-*
SMD TYPE	2835
CUTTABLE UNIT	8LEDs/41.66mm
DIMMABLE	Yes
IP RATING	IP20
LED PITCH	5.2mm
PCB WIDTH	12mm
BEAM ANGLE	120°
RUN LENGTH	5m
COPPER FOIL	3 oz
ON OFF TIMES	10000（test times）
CIRCUIT TYPE	C.C.
INPUT VOLTAGE	24V
LUMINOUS FLUX	1845–3085 lm/m
MIN BEND DIAMETER	Φ60mm
OPERATING TEMPERATURE	-25~40°C;Tc: 75°C (max)

Aplicações

Cove, wall-wash & perimeter lighting — Coves, recesses, wall-wash details and ceiling perimeters where a continuous, uniform line of light is required.
Showroom & hospitality display lighting — Shelving, display cases, reception desks and signage backlighting in shops, showrooms and hospitality spaces.
Kitchen & wardrobe under-cabinet lighting — Kitchen, wardrobe and furniture task lighting where the strip stays hidden and only the light is seen.

Acessórios recomendados e peças compatíveis

DL-1201 — 25x14.5mm Wide Surface Mount LED Channel — Aluminum Profile for 12mm Strip: Accepts LED strips up to 12mm wide.
DL-1202 — 17.3x14.5mm Surface Mount LED Channel — Deep Aluminum Profile for 12mm Strip: Accepts LED strips up to 12mm wide.
DL-1204 — 25x7mm Wide Slim Surface Mount LED Channel — Dotless Aluminum Profile for 240 LEDs/m: Accepts LED strips up to 12mm wide.
DN-PSU-100 — 24V 100W Class-2 LED Driver · High Efficiency: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
DN-PSU-150 — 24V 150W Class-2 LED Driver · Premium: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
DN-PSU-60 — 24V 60W Class-2 LED Driver · Constant Voltage: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
V1 — 5-36VDC 1-Channel * 8A RF+Push Dimming Controller | V1: Matched by input voltage range and colour channels.

Solicite um orçamento para #5289

A DENO LED é uma fabricante de fitas de LED com sede em Shenzhen e base de produção própria em Foshan. Envie-nos o comprimento do trecho, tensão, CCT/IRC e grau de proteção IP que você precisa e nossa equipe de engenharia responderá com uma ficha técnica, diagrama de fiação e preço — OEM/ODM e projetos totalmente personalizados incluídos.

WhatsApp para nossa engenharia Formulário de contato Capacidade OEM / ODM

Garantia: 5 anos
Prazo de entrega: Placas padrão: amostras a partir de 1 dia útil · personalizadas: 3–5 dias úteis · nova FPCB: 1–3 semanas · produção 1–2 semanas após aprovação da amostra
Conformidade: CE · ETL · UL · RoHS
Fio de ligação: Ouro puro 99,99%
Folha de cobre: FPCB de cobre puro 99,9%
Serviços: CCT, IRC, largura de PCB, unidade de corte e embalagem personalizadas — amostras e produção em massa de uma única fábrica.

Desempenho Fotométrico — Matriz de Eficácia CCT × IRC (CRI)

Peak measured luminous efficacy: 208.5 lm/W at 4000K, Ra 80, ErP energy class B (Grade DN (1st Tier) · 11.5W/m).

All values are measured at the stated power density and ambient 25 °C, reported as luminous efficacy in lumens per watt (lm/W), luminous flux per metre (lm/m) and the corresponding EU ErP (2019/2015) energy class.

Grade DL (2nd Tier) · 11.5W/m

Grade DL (2nd Tier) · 11.5W/m — measured at 11.5 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	149.6 lm/W	1719.8 lm/m	D	120.1 lm/W	1381.1 lm/m	E	—	—	—
2300 K	166.5 lm/W	1914.6 lm/m	C	133.7 lm/W	1538.1 lm/m	E	108.3 lm/W	1245.5 lm/m	F
2700 K	176.2 lm/W	2026.7 lm/m	C	144.7 lm/W	1664.4 lm/m	D	117.3 lm/W	1349.2 lm/m	E
3000 K	187.4 lm/W	2155.4 lm/m	B	152.3 lm/W	1751.7 lm/m	D	123.9 lm/W	1424.7 lm/m	E
3500 K	190.2 lm/W	2187.3 lm/m	B	155 lm/W	1782.4 lm/m	D	127.6 lm/W	1467.2 lm/m	E
4000 K	196.3 lm/W	2256.9 lm/m	B	158.8 lm/W	1826.1 lm/m	D	131.1 lm/W	1507.4 lm/m	E
5000 K	196 lm/W	2254.6 lm/m	B	158.7 lm/W	1824.9 lm/m	D	130.9 lm/W	1505.4 lm/m	E
6500 K	179.8 lm/W	2068.1 lm/m	C	152.2 lm/W	1750.5 lm/m	D	126.3 lm/W	1452.5 lm/m	E

Grade DL (2nd Tier) · 14.4W/m

Grade DL (2nd Tier) · 14.4W/m — measured at 14.4 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	146.5 lm/W	2110.1 lm/m	D	117.7 lm/W	1694.5 lm/m	E	—	—	—
2300 K	163.1 lm/W	2349.1 lm/m	C	131 lm/W	1887.1 lm/m	E	106.1 lm/W	1527.8 lm/m	F
2700 K	172.7 lm/W	2486.7 lm/m	C	141.8 lm/W	2042 lm/m	D	115 lm/W	1655.4 lm/m	E
3000 K	183.6 lm/W	2644.5 lm/m	C	149.3 lm/W	2149.2 lm/m	D	121.4 lm/W	1748 lm/m	E
3500 K	186.4 lm/W	2683.6 lm/m	B	151.9 lm/W	2186.9 lm/m	D	125 lm/W	1800.2 lm/m	E
4000 K	192.3 lm/W	2769.1 lm/m	B	155.6 lm/W	2240.5 lm/m	D	128.4 lm/W	1849.4 lm/m	E
5000 K	192.1 lm/W	2766.2 lm/m	B	155.5 lm/W	2239 lm/m	D	128.3 lm/W	1847.5 lm/m	E
6500 K	176.2 lm/W	2537.3 lm/m	C	149.2 lm/W	2147.8 lm/m	D	123.8 lm/W	1782.7 lm/m	E

Grade DL (2nd Tier) · 17.3W/m

Grade DL (2nd Tier) · 17.3W/m — measured at 17.3 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	143.6 lm/W	2483.9 lm/m	D	115.3 lm/W	1994.7 lm/m	E	—	—	—
2300 K	159.8 lm/W	2765.2 lm/m	D	128.4 lm/W	2221.4 lm/m	E	104 lm/W	1799.2 lm/m	F
2700 K	169.2 lm/W	2927.2 lm/m	C	138.9 lm/W	2403.8 lm/m	D	112.6 lm/W	1948.6 lm/m	E
3000 K	179.9 lm/W	3113 lm/m	C	146.2 lm/W	2530 lm/m	D	118.9 lm/W	2057.7 lm/m	E
3500 K	182.6 lm/W	3159.1 lm/m	C	148.8 lm/W	2574.3 lm/m	D	122.5 lm/W	2119.1 lm/m	E
4000 K	188.4 lm/W	3259.6 lm/m	B	152.4 lm/W	2637.4 lm/m	D	125.8 lm/W	2177.1 lm/m	E
5000 K	188.2 lm/W	3256.2 lm/m	B	152.4 lm/W	2635.7 lm/m	D	125.7 lm/W	2174.6 lm/m	E
6500 K	172.7 lm/W	2986.9 lm/m	C	146.1 lm/W	2528.3 lm/m	D	121.3 lm/W	2098.5 lm/m	E

Grade DL (2nd Tier) · 23W/m

Grade DL (2nd Tier) · 23W/m — measured at 23 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	137.9 lm/W	3172.7 lm/m	D	110.8 lm/W	2547.8 lm/m	E	—	—	—
2300 K	153.6 lm/W	3532 lm/m	D	123.4 lm/W	2837.4 lm/m	E	99.9 lm/W	2297.7 lm/m	F
2700 K	162.6 lm/W	3738.9 lm/m	C	133.5 lm/W	3070.4 lm/m	E	108.2 lm/W	2489 lm/m	F
3000 K	172.9 lm/W	3976.3 lm/m	C	140.5 lm/W	3231.5 lm/m	D	114.3 lm/W	2628.3 lm/m	E
3500 K	175.4 lm/W	4035.1 lm/m	C	143 lm/W	3288.2 lm/m	D	117.7 lm/W	2706.7 lm/m	E
4000 K	181 lm/W	4163.5 lm/m	C	146.5 lm/W	3368.7 lm/m	D	120.9 lm/W	2780.8 lm/m	E
5000 K	180.8 lm/W	4159.2 lm/m	C	146.4 lm/W	3366.5 lm/m	D	120.8 lm/W	2778.4 lm/m	E
6500 K	165.9 lm/W	3815.1 lm/m	C	140.4 lm/W	3229.4 lm/m	D	116.5 lm/W	2679.5 lm/m	E

Grade DL (2nd Tier) · 28.8W/m

Grade DL (2nd Tier) · 28.8W/m — measured at 28.8 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	132.4 lm/W	3814.2 lm/m	E	106.4 lm/W	3062.9 lm/m	F	—	—	—
2300 K	147.4 lm/W	4246.2 lm/m	D	118.4 lm/W	3411.1 lm/m	E	95.9 lm/W	2761.9 lm/m	F
2700 K	156.1 lm/W	4494.9 lm/m	D	128.2 lm/W	3691.2 lm/m	E	103.9 lm/W	2992.2 lm/m	F
3000 K	166 lm/W	4780.2 lm/m	C	134.9 lm/W	3884.9 lm/m	E	109.7 lm/W	3159.7 lm/m	F
3500 K	168.4 lm/W	4850.9 lm/m	C	137.3 lm/W	3953 lm/m	D	113 lm/W	3254 lm/m	E
4000 K	173.8 lm/W	5005.3 lm/m	C	140.6 lm/W	4049.8 lm/m	D	116.1 lm/W	3343 lm/m	E
5000 K	173.6 lm/W	5000.1 lm/m	C	140.5 lm/W	4047.2 lm/m	D	115.9 lm/W	3337.9 lm/m	E
6500 K	159.3 lm/W	4586.5 lm/m	D	134.8 lm/W	3882.3 lm/m	E	111.9 lm/W	3222.7 lm/m	E

Grade DN (1st Tier) · 11.5W/m

Grade DN (1st Tier) · 11.5W/m — measured at 11.5 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	163.4 lm/W	1879.2 lm/m	D	137.8 lm/W	1585.3 lm/m	E	—	—	—
2300 K	178.1 lm/W	2048 lm/m	C	153.8 lm/W	1768.2 lm/m	D	124.5 lm/W	1431.8 lm/m	E
2700 K	192 lm/W	2208.5 lm/m	C	166.5 lm/W	1914.6 lm/m	D	134.9 lm/W	1551 lm/m	E
3000 K	201.7 lm/W	2319.5 lm/m	B	175.6 lm/W	2019.6 lm/m	C	142.9 lm/W	1643.1 lm/m	E
3500 K	204.7 lm/W	2353.7 lm/m	B	179.4 lm/W	2063.3 lm/m	C	147.7 lm/W	1698.6 lm/m	D
4000 K	208.5 lm/W	2397.4 lm/m	B	180.4 lm/W	2075.1 lm/m	C	148.9 lm/W	1712.7 lm/m	D
5000 K	208.2 lm/W	2393.8 lm/m	B	181.7 lm/W	2089.3 lm/m	C	149.9 lm/W	1723.9 lm/m	D
6500 K	199.5 lm/W	2294.7 lm/m	C	173.6 lm/W	1996 lm/m	C	144.1 lm/W	1657.2 lm/m	E

Grade DN (1st Tier) · 14.4W/m

Grade DN (1st Tier) · 14.4W/m — measured at 14.4 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	160.1 lm/W	2305.6 lm/m	D	135.1 lm/W	1945 lm/m	E	—	—	—
2300 K	174.5 lm/W	2512.7 lm/m	C	150.7 lm/W	2169.5 lm/m	D	122 lm/W	1756.8 lm/m	E
2700 K	188.2 lm/W	2709.7 lm/m	C	163.1 lm/W	2349.1 lm/m	D	132.2 lm/W	1903 lm/m	E
3000 K	197.6 lm/W	2845.8 lm/m	C	172.1 lm/W	2478 lm/m	D	140 lm/W	2016 lm/m	E
3500 K	200.5 lm/W	2887.8 lm/m	B	175.8 lm/W	2531.5 lm/m	C	144.7 lm/W	2084 lm/m	E
4000 K	204.3 lm/W	2941.4 lm/m	B	176.8 lm/W	2546 lm/m	C	145.9 lm/W	2101.4 lm/m	D
5000 K	204 lm/W	2937 lm/m	B	178 lm/W	2563.4 lm/m	C	146.9 lm/W	2115.4 lm/m	D
6500 K	195.5 lm/W	2815.4 lm/m	C	170.1 lm/W	2449 lm/m	D	141.2 lm/W	2033.3 lm/m	E

Grade DN (1st Tier) · 17.3W/m

Grade DN (1st Tier) · 17.3W/m — measured at 17.3 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	156.9 lm/W	2714.1 lm/m	D	132.3 lm/W	2289.6 lm/m	E	—	—	—
2300 K	171 lm/W	2957.9 lm/m	D	147.6 lm/W	2553.8 lm/m	D	119.6 lm/W	2069.1 lm/m	E
2700 K	184.4 lm/W	3189.7 lm/m	C	159.8 lm/W	2765.2 lm/m	D	129.5 lm/W	2240.1 lm/m	E
3000 K	193.6 lm/W	3350 lm/m	C	168.6 lm/W	2917 lm/m	D	137.2 lm/W	2373.1 lm/m	E
3500 K	196.5 lm/W	3399.4 lm/m	C	172.3 lm/W	2980 lm/m	D	141.8 lm/W	2453.2 lm/m	E
4000 K	200.1 lm/W	3462.5 lm/m	B	173.2 lm/W	2997.1 lm/m	C	143 lm/W	2473.7 lm/m	E
5000 K	199.8 lm/W	3457.4 lm/m	B	174.4 lm/W	3017.5 lm/m	C	143.9 lm/W	2489.5 lm/m	E
6500 K	191.6 lm/W	3314.2 lm/m	C	166.6 lm/W	2882.9 lm/m	D	138.3 lm/W	2392.6 lm/m	E

Grade DN (1st Tier) · 23W/m

Grade DN (1st Tier) · 23W/m — measured at 23 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	150.7 lm/W	3466.7 lm/m	D	127.2 lm/W	2924.5 lm/m	E	—	—	—
2300 K	164.3 lm/W	3778.1 lm/m	D	141.8 lm/W	3262 lm/m	E	114.9 lm/W	2642.7 lm/m	F
2700 K	177.1 lm/W	4074.2 lm/m	C	153.6 lm/W	3532 lm/m	D	124.4 lm/W	2861.3 lm/m	E
3000 K	186 lm/W	4278.9 lm/m	C	162 lm/W	3725.8 lm/m	D	131.8 lm/W	3031.2 lm/m	E
3500 K	188.8 lm/W	4342.1 lm/m	C	165.5 lm/W	3806.4 lm/m	D	136.2 lm/W	3133.5 lm/m	E
4000 K	192.3 lm/W	4422.6 lm/m	C	166.4 lm/W	3828.2 lm/m	D	137.4 lm/W	3159.7 lm/m	E
5000 K	192 lm/W	4416.1 lm/m	C	167.6 lm/W	3854.3 lm/m	D	138.3 lm/W	3180.9 lm/m	E
6500 K	184.1 lm/W	4233.2 lm/m	C	160.1 lm/W	3682.3 lm/m	D	132.9 lm/W	3056.7 lm/m	E

Grade DN (1st Tier) · 28.8W/m

Grade DN (1st Tier) · 28.8W/m — measured at 28.8 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	144.7 lm/W	4167.6 lm/m	E	122.1 lm/W	3515.7 lm/m	E	—	—	—
2300 K	157.7 lm/W	4541.9 lm/m	D	136.2 lm/W	3921.5 lm/m	E	110.3 lm/W	3176.6 lm/m	F
2700 K	170.1 lm/W	4898 lm/m	D	147.4 lm/W	4246.1 lm/m	D	119.4 lm/W	3439.8 lm/m	E
3000 K	178.6 lm/W	5144 lm/m	C	155.5 lm/W	4479.1 lm/m	D	126.5 lm/W	3644 lm/m	E
3500 K	181.2 lm/W	5220 lm/m	C	158.9 lm/W	4576 lm/m	D	130.8 lm/W	3767.1 lm/m	E
4000 K	184.6 lm/W	5316.8 lm/m	C	159.8 lm/W	4602.2 lm/m	D	131.9 lm/W	3798.5 lm/m	E
5000 K	184.3 lm/W	5309 lm/m	C	160.9 lm/W	4633.6 lm/m	D	132.7 lm/W	3821.8 lm/m	E
6500 K	176.7 lm/W	5089.1 lm/m	C	153.7 lm/W	4426.8 lm/m	D	127.6 lm/W	3674.9 lm/m	E

Grade KE (3rd Tier) · 11.5W/m

Grade KE (3rd Tier) · 11.5W/m — measured at 11.5 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	129.2 lm/W	1486.2 lm/m	E	103.7 lm/W	1192.5 lm/m	F	—	—	—
2300 K	144.1 lm/W	1657.3 lm/m	D	115.5 lm/W	1328.2 lm/m	E	93.5 lm/W	1075.3 lm/m	F
2700 K	155.3 lm/W	1785.8 lm/m	D	125.3 lm/W	1441.4 lm/m	E	101.6 lm/W	1168.9 lm/m	F
3000 K	163.1 lm/W	1875.5 lm/m	C	132.4 lm/W	1522.8 lm/m	E	107.7 lm/W	1238.5 lm/m	F
3500 K	165.5 lm/W	1903.8 lm/m	C	135 lm/W	1552.3 lm/m	E	111.1 lm/W	1277.5 lm/m	E
4000 K	170.4 lm/W	1959.2 lm/m	C	137.9 lm/W	1585.3 lm/m	D	113.9 lm/W	1309.3 lm/m	E
5000 K	170.2 lm/W	1956.9 lm/m	C	137.9 lm/W	1585.3 lm/m	D	113.7 lm/W	1307.6 lm/m	E
6500 K	163.1 lm/W	1875.5 lm/m	C	132.3 lm/W	1521.6 lm/m	E	109.8 lm/W	1262.7 lm/m	F

Grade KE (3rd Tier) · 14.4W/m

Grade KE (3rd Tier) · 14.4W/m — measured at 14.4 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	126.6 lm/W	1823.5 lm/m	E	101.6 lm/W	1463.1 lm/m	F	—	—	—
2300 K	141.2 lm/W	2033.3 lm/m	D	113.2 lm/W	1629.6 lm/m	E	91.7 lm/W	1320.5 lm/m	F
2700 K	152.2 lm/W	2191.1 lm/m	D	122.8 lm/W	1768.5 lm/m	E	99.6 lm/W	1434.2 lm/m	F
3000 K	159.8 lm/W	2301.1 lm/m	D	129.7 lm/W	1868.4 lm/m	E	105.5 lm/W	1519.6 lm/m	F
3500 K	162.2 lm/W	2335.8 lm/m	C	132.3 lm/W	1904.5 lm/m	E	108.8 lm/W	1567.3 lm/m	F
4000 K	166.9 lm/W	2403.8 lm/m	C	135.1 lm/W	1945.1 lm/m	D	111.6 lm/W	1606.4 lm/m	E
5000 K	166.7 lm/W	2400.9 lm/m	C	135.1 lm/W	1945.1 lm/m	D	111.4 lm/W	1604.2 lm/m	E
6500 K	159.8 lm/W	2301.1 lm/m	D	129.6 lm/W	1866.9 lm/m	E	107.6 lm/W	1549.4 lm/m	F

Grade KE (3rd Tier) · 17.3W/m

Grade KE (3rd Tier) · 17.3W/m — measured at 17.3 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	124.1 lm/W	2146.6 lm/m	E	99.6 lm/W	1722.4 lm/m	F	—	—	—
2300 K	138.4 lm/W	2393.6 lm/m	D	110.9 lm/W	1918.3 lm/m	E	89.8 lm/W	1553.5 lm/m	F
2700 K	149.1 lm/W	2579.3 lm/m	D	120.3 lm/W	2081.8 lm/m	E	97.6 lm/W	1688.3 lm/m	F
3000 K	156.6 lm/W	2708.7 lm/m	D	127.1 lm/W	2199.4 lm/m	E	103.4 lm/W	1788.8 lm/m	F
3500 K	158.9 lm/W	2749.6 lm/m	D	129.6 lm/W	2242 lm/m	E	106.6 lm/W	1845 lm/m	F
4000 K	163.6 lm/W	2829.7 lm/m	C	132.4 lm/W	2289.7 lm/m	E	109.3 lm/W	1891 lm/m	F
5000 K	163.4 lm/W	2826.3 lm/m	C	132.4 lm/W	2289.7 lm/m	E	109.2 lm/W	1889.2 lm/m	F
6500 K	156.6 lm/W	2708.7 lm/m	D	127 lm/W	2197.7 lm/m	E	105.4 lm/W	1823.4 lm/m	F

Grade KE (3rd Tier) · 23W/m

Grade KE (3rd Tier) · 23W/m — measured at 23 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	119.2 lm/W	2741.8 lm/m	E	95.7 lm/W	2200 lm/m	F	—	—	—
2300 K	132.9 lm/W	3057.3 lm/m	E	106.5 lm/W	2450.2 lm/m	F	86.3 lm/W	1984.9 lm/m	F
2700 K	143.2 lm/W	3294.5 lm/m	D	115.6 lm/W	2659.1 lm/m	E	93.8 lm/W	2156.4 lm/m	F
3000 K	150.4 lm/W	3459.9 lm/m	D	122.1 lm/W	2809.2 lm/m	E	99.3 lm/W	2284.8 lm/m	F
3500 K	152.7 lm/W	3512.1 lm/m	D	124.5 lm/W	2863.6 lm/m	E	102.5 lm/W	2356.6 lm/m	F
4000 K	157.1 lm/W	3614.4 lm/m	D	127.2 lm/W	2924.6 lm/m	E	105 lm/W	2415.4 lm/m	F
5000 K	157 lm/W	3610 lm/m	D	127.2 lm/W	2924.6 lm/m	E	104.9 lm/W	2412.7 lm/m	F
6500 K	150.4 lm/W	3459.9 lm/m	D	122 lm/W	2807.1 lm/m	E	101.3 lm/W	2329.9 lm/m	F

Grade KE (3rd Tier) · 28.8W/m

Grade KE (3rd Tier) · 28.8W/m — measured at 28.8 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	114.4 lm/W	3296.1 lm/m	E	91.8 lm/W	2644.8 lm/m	F	—	—	—
2300 K	127.6 lm/W	3675.4 lm/m	E	102.3 lm/W	2945.6 lm/m	F	82.8 lm/W	2384.6 lm/m	G
2700 K	137.5 lm/W	3960.6 lm/m	D	111 lm/W	3196.7 lm/m	E	90 lm/W	2592.4 lm/m	F
3000 K	144.4 lm/W	4159.4 lm/m	D	117.3 lm/W	3377.2 lm/m	E	95.4 lm/W	2746.8 lm/m	F
3500 K	146.6 lm/W	4222.2 lm/m	D	119.5 lm/W	3442.6 lm/m	E	98.4 lm/W	2833.1 lm/m	F
4000 K	150.9 lm/W	4345.1 lm/m	D	122.1 lm/W	3515.9 lm/m	E	100.8 lm/W	2903.7 lm/m	F
5000 K	150.7 lm/W	4339.9 lm/m	D	122.1 lm/W	3515.9 lm/m	E	100.7 lm/W	2900.2 lm/m	F
6500 K	144.4 lm/W	4159.4 lm/m	D	117.2 lm/W	3374.6 lm/m	E	97.3 lm/W	2802.2 lm/m	F

High-Power LED Strip: Heat Dissipation & Aluminum Channel Guide

At up to 28.8W/m, 5289 is a high-power SMD LED strip. Above roughly 14.4W/m the tape can no longer shed its own heat through the FPC alone — an aluminum channel is part of the luminaire, not an accessory.

Why high-wattage strips need a heat sink

Aluminum conducts heat roughly 30× faster than the plastics, MDF or gypsum a strip is usually stuck to, so a bare high-power run traps heat under the tape.
LED lifetime (LM-80 / TM-21) is driven by solder-point temperature Tc. Keeping Tc inside the datasheet limit — DENO strips are rated Tc ≤ 75°C — is what preserves the rated L70 lifetime and colour stability.
Never run 14.4W/m or more coiled on the reel, inside a sealed plastic diffuser, or directly on wood, wallpaper or foam.

Sizing rule: FPC width vs channel inner width

Channel inner width ≥ FPC width + 2mm. This strip is 12mm wide, so it needs at least 14mm of inner width.
The 2mm clearance absorbs extrusion tolerance and lets the tape be seated or replaced without scraping the side walls or the wiring.
A frosted or opal PC cover then diffuses the higher lumen output into an even, dot-free line instead of visible hot spots.

Aluminum channels that fit this strip

Recommended LED Channels

Mount this LED strip in a DENO LED aluminum profile for heat dissipation, physical protection and diffused, dot-free output.

This strip is 12mm wide, so it needs a channel with at least 14mm inner width (12mm + 2mm clearance). Every profile below meets that.

Modelos relacionados nesta série

See every model in SMD LED Strip Series or narrow to High Efficiency. Compare wattage, lumen output and run length in the ProCalc parameter library, or request OEM/ODM pricing on the custom manufacturing page.

Perguntas Frequentes

Quais são as principais especificações do 5289?

5289: 2835, 192 LEDs/m, 24V, PCB de 12mm, FPCB com cobre de 3 oz, corte a cada 8LEDs/41.66mm. Dados fotométricos completos, diagramas de ligação e relatórios de ensaio estão disponíveis na seção de downloads desta página.

O que diferencia a construção desta Fita de LED com IC de corrente constante?

Ela é construída como uma Fita de LED com IC de corrente constante sobre FPCB com cobre de 3 oz, com unidade de corte de 8LEDs/41.66mm e espaçamento entre LEDs de 5.2mm, mantendo assim seu desempenho elétrico e mecânico onde as fitas convencionais falham.

A DENO pode personalizar esta Fita de LED com IC de corrente constante para um projeto?

Sim. A DENO fabrica a série de Fitas C.C. SMD (Reguladas por IC) como fornecedora OEM e ODM: comprimento do rolo, temperatura de cor, nível de IRC (CRI), largura da PCB, impermeabilização e marca própria podem ser especificados. Solicite um Orçamento para consultar o prazo de entrega e os preços do projeto.

Quanto uma Fita de LED de alta eficácia pode reduzir o consumo de energia?

A substituição de uma fita típica de 100 lm/W por uma Fita de LED de alto fluxo luminoso de 180 a 200 lm/W reduz aproximadamente pela metade a potência necessária para o mesmo fluxo luminoso. Em um trecho comercial longo, isso também reduz a capacidade necessária do Driver / Fonte de Alimentação e ajuda a instalação a atingir uma classe energética ErP melhor.

Uma Fita de LED de corrente constante realmente elimina a queda de tensão?

A tensão ainda cai ao longo do cobre, mas o IC de corrente constante de cada segmento mantém a corrente dos LEDs fixa até que a tensão local caia abaixo do seu limite mínimo de regulação. Assim, o brilho permanece uniforme de ponta a ponta, e a alimentação pode ser aplicada em uma extremidade, nas duas extremidades ou em qualquer ponto intermediário do trecho.

Engineering & selection guide

Bending limits, IP selection, voltage drop, cutting and the full buyer Q&A for this family are kept on the series page.

High Efficiency LED Strips series — High Efficiency LED Strip — Buyer Questions
LED strip engineering selection handbook