What counts as a high efficiency LED strip in lumens per watt?

In 2026 a mainstream 24V 2835 board sits around 120-140 lm/W. A high efficiency LED strip starts at roughly 160 lm/W and DENO's top binned 2835 and 2110 boards are measured at up to 200 lm/W at 4000K Ra 80, LM-79 tested at 25 degrees Celsius. The figure is light-source efficacy of the tape itself, measured without the driver, which is exactly how the ErP energy label is calculated.

What is the difference between high efficiency and high efficacy LED strip lights?

They describe the same measurement. Efficacy is the engineering term for lumens delivered per watt consumed; efficiency is how buyers and tender documents usually phrase it. DENO publishes lm/W per model so both audiences read the same number, and the ErP energy class printed on the reel is derived from it.

Which ErP energy class can a high efficiency LED strip reach?

Class C is achievable on the best-binned 2835 and 2110 boards above 180 lm/W, class D covers the 160-180 lm/W band and most well-specified architectural tape lands in class E. High-CRI 95+ and full spectrum builds drop one or two classes because phosphor conversion costs lumens. Every DENO datasheet states the measured class so it can be reproduced by a notified body.

Does a high efficiency LED strip run cooler and last longer?

Yes. Fewer watts per lumen means less heat into the FPCB, so junction temperature drops and L70 lifetime extends. Combined with 2 oz copper and a 99.9% pure copper foil the same brightness can be produced at 20-30% lower wattage, which also lets a single driver feed a longer run and keeps aluminium profiles below the touch-temperature limits used in hospitality projects.

How much energy does a high efficiency LED strip save on a large project?

Take 500 m of cove lighting at 10 hours a day. A 130 lm/W board delivering 1000 lm/m draws about 7.7 W/m; a 190 lm/W board delivers the same output at about 5.3 W/m. Across 500 m that is 1.2 kW saved, roughly 4,380 kWh a year, and it usually removes one driver and one circuit from the electrical schedule as well.

Can I get a high efficiency LED strip in 12V, 24V, 36V or 48V?

24V is the efficiency sweet spot and carries the full binned range. 12V is available where fixture space or existing drivers dictate it, at the cost of shorter single-feed runs. 36V and 48V constant-current boards keep the same lm/W while extending a single feed well past 20 m, which is where the real system efficiency gain shows up on long architectural lines.

Fita de LED 2835 de Corrente Constante, Alto Fluxo Luminoso e Alta Eficácia Luminosa (#3410)

12mm · 24V · 160LEDs · 50corte

Model: 3410

3410 12mm | 24V | 160LEDs | 50corte | #3410 | Fita de LED 2835 de Corrente Constante, Alto Fluxo Luminoso e Alta Eficácia Luminosa — 24V, cuttable every 50mm, 12mm FPCB width, 2835 LEDs, 160 LEDs/m, IP20

Visão Geral

12mm | 24V | 160LEDs | 50cut | #3410 | Fita de LED 2835 de Corrente Constante, Alto Fluxo Luminoso e Alta Eficácia Luminosa faz parte da série de Fitas SMD C.C. (Reguladas por IC) da DENO, desenvolvida para Fita de LED com IC de corrente constante. Especificações principais: 2835, 160 LEDs/m, 24V, 12 PCB, FPCB de cobre de 3oz, corte a cada 8LEDs/50mm. Cada rolo é produzido na linha roll-to-roll da DENO com FPCB de cobre com pureza de 99.9% e é fornecido em conformidade com CE, UL e RoHS para projetos de arquitetura, varejo e hotelaria. Configurações OEM e ODM de comprimento, temperatura de cor e impermeabilização estão disponíveis sob consulta.

Descrição

O projeto de corrente constante em todo o circuito de 24V garante iluminação uniforme e brilho estável ao longo de todo o trecho máximo de 5m. Com 160 LEDs por metro em uma PCB de cobre de 12mm e 3oz, esta Fita de LED 2835 oferece alto fluxo luminoso e eficácia superior. Esta fita dimerizável permite cortes a cada 50mm e suporta vários protocolos de dimerização, incluindo PWM, DALI e 0-10V, para um controle versátil da iluminação. Desenvolvida para fornecimento de projetos no atacado, esta solução flexível oferece iluminação confiável e de alto desempenho para vitrines comerciais e instalações de iluminação arquitetônica.

We use 99.99% gold wire, large-size chips, and thickened FPCB, backed by a 5-year warranty.

Especificações

CRI	Ra>80 / Ra>90 / Ra>95
POWER (W/M)	20 W/m
LED QTY	160 LEDs/m
PART NO	DL-F28A80V24-3410-*
SMD TYPE	2835
CUTTABLE UNIT	8LEDs/50mm
DIMMABLE	Yes
IP RATING	IP20
LED PITCH	6.2mm
PCB WIDTH	12
BEAM ANGLE	120°
RUN LENGTH	5m
COPPER FOIL	3oz
POWER RANGE	2.4~28.8W
CIRCUIT TYPE	C.C.
INPUT VOLTAGE	24V
LUMINOUS FLUX	2230–3730 lm/m
OPERATING TEMPERATURE	-25~40°C;Tc：75°C（max）

Aplicações

Cove, wall-wash & perimeter lighting — Coves, recesses, wall-wash details and ceiling perimeters where a continuous, uniform line of light is required.
Showroom & hospitality display lighting — Shelving, display cases, reception desks and signage backlighting in shops, showrooms and hospitality spaces.
Kitchen & wardrobe under-cabinet lighting — Kitchen, wardrobe and furniture task lighting where the strip stays hidden and only the light is seen.

Acessórios recomendados e peças compatíveis

DL-1201 — 25x14.5mm Wide Surface Mount LED Channel — Aluminum Profile for 12mm Strip: Accepts LED strips up to 12mm wide.
DL-1202 — 17.3x14.5mm Surface Mount LED Channel — Deep Aluminum Profile for 12mm Strip: Accepts LED strips up to 12mm wide.
DL-1204 — 25x7mm Wide Slim Surface Mount LED Channel — Dotless Aluminum Profile for 240 LEDs/m: Accepts LED strips up to 12mm wide.
DN-PSU-100 — 24V 100W Class-2 LED Driver · High Efficiency: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
DN-PSU-150 — 24V 150W Class-2 LED Driver · Premium: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
DN-PSU-60 — 24V 60W Class-2 LED Driver · Constant Voltage: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
V1 — 5-36VDC 1-Channel * 8A RF+Push Dimming Controller | V1: Matched by input voltage range and colour channels.

Solicite um orçamento para #3410

A DENO LED é uma fabricante de fitas de LED com sede em Shenzhen e base de produção própria em Foshan. Envie-nos o comprimento do trecho, tensão, CCT/IRC e grau de proteção IP que você precisa e nossa equipe de engenharia responderá com uma ficha técnica, diagrama de fiação e preço — OEM/ODM e projetos totalmente personalizados incluídos.

WhatsApp para nossa engenharia Formulário de contato Capacidade OEM / ODM

Garantia: 5 anos
Prazo de entrega: Placas padrão: amostras a partir de 1 dia útil · personalizadas: 3–5 dias úteis · nova FPCB: 1–3 semanas · produção 1–2 semanas após aprovação da amostra
Conformidade: CE · ETL · UL · RoHS
Fio de ligação: Ouro puro 99,99%
Folha de cobre: FPCB de cobre puro 99,9%
Serviços: CCT, IRC, largura de PCB, unidade de corte e embalagem personalizadas — amostras e produção em massa de uma única fábrica.

Desempenho Fotométrico — Matriz de Eficácia CCT × IRC (CRI)

Peak measured luminous efficacy: 205.8 lm/W at 4000K, Ra 80, ErP energy class B (Grade DL (2nd Tier) · 9.6W/m).

All values are measured at the stated power density and ambient 25 °C, reported as luminous efficacy in lumens per watt (lm/W), luminous flux per metre (lm/m) and the corresponding EU ErP (2019/2015) energy class.

Grade DN (1st Tier) · 9.6W/m

Grade DN (1st Tier) · 9.6W/m — measured at 9.6 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	158.7 lm/W	1524 lm/m	D	134 lm/W	1286 lm/m	E	—	—	—
2300 K	173.1 lm/W	1661.9 lm/m	C	149.4 lm/W	1434.6 lm/m	D	121 lm/W	1161.6 lm/m	E
2700 K	186.6 lm/W	1791.1 lm/m	C	161.8 lm/W	1553.1 lm/m	D	131.1 lm/W	1258.8 lm/m	E
3000 K	196 lm/W	1881.4 lm/m	C	170.7 lm/W	1638.6 lm/m	D	138.8 lm/W	1332.6 lm/m	E
3500 K	198.9 lm/W	1909.6 lm/m	C	174.4 lm/W	1674.5 lm/m	C	143.6 lm/W	1378.3 lm/m	E
4000 K	202.7 lm/W	1945.5 lm/m	B	175.3 lm/W	1683.3 lm/m	C	144.8 lm/W	1389.9 lm/m	E
5000 K	202.4 lm/W	1942.6 lm/m	B	176.6 lm/W	1694.9 lm/m	C	145.7 lm/W	1398.7 lm/m	E
6500 K	194 lm/W	1862 lm/m	C	168.7 lm/W	1619.1 lm/m	D	140 lm/W	1344 lm/m	E

Grade DN (1st Tier) · 12W/m

Grade DN (1st Tier) · 12W/m — measured at 12 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	156.1 lm/W	1873.1 lm/m	D	131.7 lm/W	1580.6 lm/m	E	—	—	—
2300 K	170.2 lm/W	2042.6 lm/m	D	146.9 lm/W	1763.3 lm/m	D	119 lm/W	1428 lm/m	E
2700 K	183.5 lm/W	2201.4 lm/m	C	159.1 lm/W	1908.9 lm/m	D	128.9 lm/W	1547.2 lm/m	E
3000 K	192.7 lm/W	2312.4 lm/m	C	167.8 lm/W	2014 lm/m	D	136.5 lm/W	1637.9 lm/m	E
3500 K	195.6 lm/W	2347.1 lm/m	C	171.5 lm/W	2058.1 lm/m	D	141.2 lm/W	1694 lm/m	E
4000 K	199.3 lm/W	2391.2 lm/m	C	172.4 lm/W	2068.9 lm/m	D	142.4 lm/W	1708.4 lm/m	E
5000 K	199 lm/W	2387.6 lm/m	C	173.6 lm/W	2083.2 lm/m	C	143.2 lm/W	1718.4 lm/m	E
6500 K	190.7 lm/W	2288.6 lm/m	C	165.8 lm/W	1990.1 lm/m	D	137.6 lm/W	1651.2 lm/m	E

Grade DN (1st Tier) · 14.4W/m

Grade DN (1st Tier) · 14.4W/m — measured at 14.4 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	153.5 lm/W	2210.1 lm/m	D	129.5 lm/W	1865 lm/m	E	—	—	—
2300 K	167.4 lm/W	2410.2 lm/m	D	144.5 lm/W	2080.6 lm/m	E	117 lm/W	1684.8 lm/m	F
2700 K	180.4 lm/W	2597.5 lm/m	C	156.4 lm/W	2252.4 lm/m	D	126.8 lm/W	1825.6 lm/m	E
3000 K	189.5 lm/W	2728.5 lm/m	C	165 lm/W	2376.4 lm/m	D	134.2 lm/W	1932.6 lm/m	E
3500 K	192.3 lm/W	2769.4 lm/m	C	168.6 lm/W	2428.5 lm/m	D	138.8 lm/W	1998.9 lm/m	E
4000 K	195.9 lm/W	2821.5 lm/m	C	169.5 lm/W	2441.2 lm/m	D	140 lm/W	2015.8 lm/m	E
5000 K	195.6 lm/W	2817.3 lm/m	C	170.7 lm/W	2458.1 lm/m	D	140.8 lm/W	2027.5 lm/m	E
6500 K	187.5 lm/W	2700.4 lm/m	C	163.1 lm/W	2348.2 lm/m	D	135.3 lm/W	1948.3 lm/m	E

Grade DN (1st Tier) · 20W/m

Grade DN (1st Tier) · 20W/m — measured at 20 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	147.6 lm/W	2951.2 lm/m	D	124.5 lm/W	2490.4 lm/m	E	—	—	—
2300 K	160.9 lm/W	3218.3 lm/m	D	138.9 lm/W	2778.2 lm/m	E	112.5 lm/W	2250 lm/m	F
2700 K	173.4 lm/W	3468.5 lm/m	C	150.4 lm/W	3007.7 lm/m	D	121.9 lm/W	2437.7 lm/m	E
3000 K	182.2 lm/W	3643.4 lm/m	C	158.7 lm/W	3173.2 lm/m	D	129 lm/W	2580.7 lm/m	E
3500 K	184.9 lm/W	3698 lm/m	C	162.1 lm/W	3242.8 lm/m	D	133.5 lm/W	2669.1 lm/m	E
4000 K	188.4 lm/W	3767.6 lm/m	C	163 lm/W	3259.7 lm/m	D	134.6 lm/W	2691.7 lm/m	E
5000 K	188.1 lm/W	3761.9 lm/m	C	164.1 lm/W	3282.3 lm/m	D	135.4 lm/W	2708 lm/m	E
6500 K	180.3 lm/W	3605.8 lm/m	C	156.8 lm/W	3135.6 lm/m	D	130.1 lm/W	2602 lm/m	E

Grade DN (1st Tier) · 22W/m

Grade DN (1st Tier) · 22W/m — measured at 22 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	145.5 lm/W	3201.1 lm/m	E	122.8 lm/W	2701.2 lm/m	E	—	—	—
2300 K	158.7 lm/W	3490.8 lm/m	D	137 lm/W	3013.4 lm/m	E	110.9 lm/W	2439.8 lm/m	F
2700 K	171 lm/W	3762.1 lm/m	D	148.3 lm/W	3262.3 lm/m	D	120.2 lm/W	2644.1 lm/m	E
3000 K	179.6 lm/W	3951.9 lm/m	C	156.4 lm/W	3441.8 lm/m	D	127.2 lm/W	2799.2 lm/m	E
3500 K	182.3 lm/W	4011 lm/m	C	159.9 lm/W	3517.3 lm/m	D	131.6 lm/W	2895 lm/m	E
4000 K	185.8 lm/W	4086.5 lm/m	C	160.7 lm/W	3535.7 lm/m	D	132.7 lm/W	2919.5 lm/m	E
5000 K	185.5 lm/W	4080.4 lm/m	C	161.8 lm/W	3560.1 lm/m	D	133.5 lm/W	2937 lm/m	E
6500 K	177.8 lm/W	3911.1 lm/m	C	154.6 lm/W	3401 lm/m	D	128.3 lm/W	2822.6 lm/m	E

Grade DN (1st Tier) · 24W/m

Grade DN (1st Tier) · 24W/m — measured at 24 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	143.5 lm/W	3443.4 lm/m	E	121.1 lm/W	2905.7 lm/m	E	—	—	—
2300 K	156.5 lm/W	3755 lm/m	D	135.1 lm/W	3241.5 lm/m	E	109.4 lm/W	2625.6 lm/m	F
2700 K	168.6 lm/W	4046.9 lm/m	D	146.2 lm/W	3509.2 lm/m	D	118.5 lm/W	2844.2 lm/m	F
3000 K	177.1 lm/W	4251 lm/m	C	154.3 lm/W	3702.3 lm/m	D	125.5 lm/W	3011 lm/m	E
3500 K	179.8 lm/W	4314.6 lm/m	C	157.6 lm/W	3783.5 lm/m	D	129.8 lm/W	3114.2 lm/m	E
4000 K	183.2 lm/W	4395.8 lm/m	C	158.5 lm/W	3803.3 lm/m	D	130.9 lm/W	3140.5 lm/m	E
5000 K	182.9 lm/W	4389.2 lm/m	C	159.6 lm/W	3829.6 lm/m	D	131.6 lm/W	3158.4 lm/m	E
6500 K	175.3 lm/W	4207.1 lm/m	C	152.4 lm/W	3658.4 lm/m	D	126.5 lm/W	3036 lm/m	E

Grade DL (2nd Tier) · 9.6W/m

Grade DL (2nd Tier) · 9.6W/m — measured at 9.6 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	156.8 lm/W	1505.1 lm/m	D	125.9 lm/W	1208.6 lm/m	E	—	—	—
2300 K	174.6 lm/W	1676.4 lm/m	C	140.3 lm/W	1347.1 lm/m	D	113.7 lm/W	1091.5 lm/m	E
2700 K	184.8 lm/W	1773.9 lm/m	C	151.8 lm/W	1456.8 lm/m	D	123 lm/W	1180.9 lm/m	E
3000 K	196.5 lm/W	1886.7 lm/m	B	159.8 lm/W	1533.8 lm/m	D	129.8 lm/W	1246.5 lm/m	E
3500 K	199.4 lm/W	1914.4 lm/m	B	162.5 lm/W	1560.5 lm/m	C	133.8 lm/W	1284.5 lm/m	E
4000 K	205.8 lm/W	1976 lm/m	B	166.5 lm/W	1598.4 lm/m	C	137.4 lm/W	1319.4 lm/m	D
5000 K	205.6 lm/W	1973.9 lm/m	B	166.4 lm/W	1597.4 lm/m	C	137.3 lm/W	1318.1 lm/m	D
6500 K	188.5 lm/W	1809.8 lm/m	B	159.7 lm/W	1532.8 lm/m	D	132.5 lm/W	1272 lm/m	E

Grade DL (2nd Tier) · 12W/m

Grade DL (2nd Tier) · 12W/m — measured at 12 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	154.2 lm/W	1849.9 lm/m	D	123.8 lm/W	1485.4 lm/m	E	—	—	—
2300 K	171.7 lm/W	2060.5 lm/m	C	138 lm/W	1655.7 lm/m	D	111.8 lm/W	1341.6 lm/m	E
2700 K	181.7 lm/W	2180.2 lm/m	C	149.2 lm/W	1790.6 lm/m	D	120.9 lm/W	1451.4 lm/m	E
3000 K	193.2 lm/W	2319 lm/m	B	157.1 lm/W	1885.2 lm/m	D	127.7 lm/W	1532.1 lm/m	E
3500 K	196.1 lm/W	2353 lm/m	B	159.8 lm/W	1918 lm/m	D	131.6 lm/W	1578.8 lm/m	E
4000 K	202.4 lm/W	2428.7 lm/m	B	163.7 lm/W	1964.6 lm/m	C	135.1 lm/W	1621.6 lm/m	D
5000 K	202.2 lm/W	2426.1 lm/m	B	163.6 lm/W	1963.4 lm/m	C	135 lm/W	1620 lm/m	D
6500 K	185.4 lm/W	2224.4 lm/m	B	157 lm/W	1883.9 lm/m	D	130.3 lm/W	1563.6 lm/m	E

Grade DL (2nd Tier) · 14.4W/m

Grade DL (2nd Tier) · 14.4W/m — measured at 14.4 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	151.6 lm/W	2182.7 lm/m	D	121.7 lm/W	1752.7 lm/m	E	—	—	—
2300 K	168.8 lm/W	2431.2 lm/m	C	135.7 lm/W	1953.6 lm/m	D	109.9 lm/W	1582.6 lm/m	F
2700 K	178.6 lm/W	2572.6 lm/m	C	146.7 lm/W	2112.8 lm/m	D	118.9 lm/W	1712.6 lm/m	E
3000 K	190 lm/W	2736.2 lm/m	B	154.5 lm/W	2224.4 lm/m	D	125.5 lm/W	1807.8 lm/m	E
3500 K	192.8 lm/W	2776.4 lm/m	B	157.2 lm/W	2263.1 lm/m	D	129.4 lm/W	1862.8 lm/m	E
4000 K	199 lm/W	2865.7 lm/m	B	161 lm/W	2318.1 lm/m	C	132.9 lm/W	1913.4 lm/m	E
5000 K	198.8 lm/W	2862.7 lm/m	B	160.9 lm/W	2316.6 lm/m	C	132.7 lm/W	1910.9 lm/m	E
6500 K	182.3 lm/W	2624.6 lm/m	C	154.4 lm/W	2222.9 lm/m	D	128.1 lm/W	1844.6 lm/m	E

Grade DL (2nd Tier) · 20W/m

Grade DL (2nd Tier) · 20W/m — measured at 20 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	145.7 lm/W	2914.6 lm/m	D	117 lm/W	2340.4 lm/m	E	—	—	—
2300 K	162.3 lm/W	3246.4 lm/m	C	130.4 lm/W	2608.7 lm/m	E	105.7 lm/W	2114 lm/m	F
2700 K	171.8 lm/W	3435.2 lm/m	C	141.1 lm/W	2821.2 lm/m	D	114.3 lm/W	2286.8 lm/m	E
3000 K	182.7 lm/W	3653.7 lm/m	C	148.5 lm/W	2970.3 lm/m	D	120.7 lm/W	2414 lm/m	E
3500 K	185.4 lm/W	3707.4 lm/m	B	151.1 lm/W	3021.9 lm/m	D	124.4 lm/W	2487.5 lm/m	E
4000 K	191.3 lm/W	3826.6 lm/m	B	154.8 lm/W	3095.4 lm/m	D	127.8 lm/W	2555 lm/m	E
5000 K	191.1 lm/W	3822.6 lm/m	B	154.7 lm/W	3093.4 lm/m	D	127.6 lm/W	2552 lm/m	E
6500 K	175.2 lm/W	3504.7 lm/m	C	148.4 lm/W	2968.3 lm/m	D	123.2 lm/W	2464 lm/m	E

Grade DL (2nd Tier) · 22W/m

Grade DL (2nd Tier) · 22W/m — measured at 22 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	143.7 lm/W	3161.4 lm/m	D	115.4 lm/W	2538.6 lm/m	E	—	—	—
2300 K	160.1 lm/W	3521.2 lm/m	C	128.6 lm/W	2829.5 lm/m	E	104.2 lm/W	2292.4 lm/m	F
2700 K	169.4 lm/W	3726 lm/m	C	139.1 lm/W	3060.1 lm/m	D	112.7 lm/W	2480.4 lm/m	E
3000 K	180.1 lm/W	3963 lm/m	C	146.4 lm/W	3221.7 lm/m	D	119 lm/W	2618.3 lm/m	E
3500 K	182.8 lm/W	4021.2 lm/m	C	149 lm/W	3277.7 lm/m	D	122.6 lm/W	2698 lm/m	E
4000 K	188.7 lm/W	4150.5 lm/m	B	152.6 lm/W	3357.5 lm/m	D	126 lm/W	2771.3 lm/m	E
5000 K	188.5 lm/W	4146.2 lm/m	B	152.5 lm/W	3355.3 lm/m	D	125.8 lm/W	2767.6 lm/m	E
6500 K	172.8 lm/W	3801.4 lm/m	C	146.3 lm/W	3219.5 lm/m	D	121.5 lm/W	2673 lm/m	E

Grade DL (2nd Tier) · 24W/m

Grade DL (2nd Tier) · 24W/m — measured at 24 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	141.7 lm/W	3400.6 lm/m	D	113.8 lm/W	2730.7 lm/m	E	—	—	—
2300 K	157.8 lm/W	3787.8 lm/m	D	126.8 lm/W	3043.7 lm/m	E	102.7 lm/W	2464.8 lm/m	F
2700 K	167 lm/W	4008 lm/m	C	137.2 lm/W	3291.7 lm/m	D	111.2 lm/W	2668.1 lm/m	E
3000 K	177.6 lm/W	4263 lm/m	C	144.4 lm/W	3465.6 lm/m	D	117.4 lm/W	2816.5 lm/m	E
3500 K	180.2 lm/W	4325.6 lm/m	C	146.9 lm/W	3525.8 lm/m	D	120.9 lm/W	2902.3 lm/m	E
4000 K	186 lm/W	4464.7 lm/m	B	150.5 lm/W	3611.6 lm/m	D	124.2 lm/W	2981.1 lm/m	E
5000 K	185.8 lm/W	4460 lm/m	B	150.4 lm/W	3609.3 lm/m	D	124.1 lm/W	2978.4 lm/m	E
6500 K	170.4 lm/W	4089.1 lm/m	C	144.3 lm/W	3463.2 lm/m	D	119.8 lm/W	2875.2 lm/m	E

Grade KE (3rd Tier) · 9.6W/m

Grade KE (3rd Tier) · 9.6W/m — measured at 9.6 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	136 lm/W	1305.5 lm/m	D	109.2 lm/W	1047.9 lm/m	F	—	—	—
2300 K	151.6 lm/W	1455.5 lm/m	D	121.7 lm/W	1168 lm/m	E	98.6 lm/W	946.6 lm/m	F
2700 K	163.4 lm/W	1568.9 lm/m	C	132 lm/W	1267 lm/m	E	106.9 lm/W	1026.7 lm/m	F
3000 K	171.6 lm/W	1647.7 lm/m	C	139.4 lm/W	1338.2 lm/m	D	113.4 lm/W	1088.2 lm/m	E
3500 K	174.1 lm/W	1671.8 lm/m	C	142.1 lm/W	1364.1 lm/m	D	117 lm/W	1122.8 lm/m	E
4000 K	179.2 lm/W	1720.8 lm/m	C	145.2 lm/W	1393.9 lm/m	D	119.9 lm/W	1150.7 lm/m	E
5000 K	179 lm/W	1718.9 lm/m	C	145.1 lm/W	1393 lm/m	D	119.7 lm/W	1149.1 lm/m	E
6500 K	171.6 lm/W	1647.7 lm/m	C	139.3 lm/W	1337.2 lm/m	D	115.6 lm/W	1109.8 lm/m	E

Grade KE (3rd Tier) · 12W/m

Grade KE (3rd Tier) · 12W/m — measured at 12 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	133.7 lm/W	1604.6 lm/m	E	107.3 lm/W	1287.9 lm/m	F	—	—	—
2300 K	149.1 lm/W	1788.9 lm/m	D	119.6 lm/W	1435.6 lm/m	E	96.9 lm/W	1162.8 lm/m	F
2700 K	160.7 lm/W	1928.3 lm/m	C	129.8 lm/W	1557.3 lm/m	E	105.2 lm/W	1261.9 lm/m	F
3000 K	168.8 lm/W	2025.2 lm/m	C	137.1 lm/W	1644.8 lm/m	D	111.5 lm/W	1337.5 lm/m	E
3500 K	171.2 lm/W	2054.8 lm/m	C	139.7 lm/W	1676.7 lm/m	D	115 lm/W	1380.1 lm/m	E
4000 K	176.3 lm/W	2115 lm/m	C	142.8 lm/W	1713.3 lm/m	D	117.9 lm/W	1414.4 lm/m	E
5000 K	176.1 lm/W	2112.7 lm/m	C	142.7 lm/W	1712.1 lm/m	D	117.7 lm/W	1412.4 lm/m	E
6500 K	168.8 lm/W	2025.2 lm/m	C	137 lm/W	1643.6 lm/m	D	113.7 lm/W	1364.4 lm/m	E

Grade KE (3rd Tier) · 14.4W/m

Grade KE (3rd Tier) · 14.4W/m — measured at 14.4 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	131.5 lm/W	1893.3 lm/m	E	105.5 lm/W	1519.7 lm/m	F	—	—	—
2300 K	146.6 lm/W	2110.8 lm/m	D	117.6 lm/W	1693.9 lm/m	E	95.3 lm/W	1372.3 lm/m	F
2700 K	158 lm/W	2275.3 lm/m	D	127.6 lm/W	1837.5 lm/m	E	103.4 lm/W	1489 lm/m	F
3000 K	165.9 lm/W	2389.6 lm/m	C	134.8 lm/W	1940.7 lm/m	E	109.6 lm/W	1578.2 lm/m	F
3500 K	168.4 lm/W	2424.5 lm/m	C	137.4 lm/W	1978.4 lm/m	D	113.1 lm/W	1628.4 lm/m	E
4000 K	173.3 lm/W	2495.6 lm/m	C	140.4 lm/W	2021.6 lm/m	D	115.9 lm/W	1668.8 lm/m	E
5000 K	173.1 lm/W	2492.8 lm/m	C	140.3 lm/W	2020.2 lm/m	D	115.7 lm/W	1666.1 lm/m	E
6500 K	165.9 lm/W	2389.6 lm/m	C	134.7 lm/W	1939.3 lm/m	E	111.8 lm/W	1609.9 lm/m	E

Grade KE (3rd Tier) · 20W/m

Grade KE (3rd Tier) · 20W/m — measured at 20 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	126.4 lm/W	2528.2 lm/m	E	101.5 lm/W	2029.2 lm/m	F	—	—	—
2300 K	140.9 lm/W	2818.6 lm/m	D	113.1 lm/W	2261.9 lm/m	E	91.6 lm/W	1832 lm/m	F
2700 K	151.9 lm/W	3038.3 lm/m	D	122.7 lm/W	2453.7 lm/m	E	99.4 lm/W	1988.3 lm/m	F
3000 K	159.5 lm/W	3190.9 lm/m	D	129.6 lm/W	2591.5 lm/m	E	105.4 lm/W	2107.4 lm/m	F
3500 K	161.9 lm/W	3237.5 lm/m	C	132.1 lm/W	2641.7 lm/m	E	108.7 lm/W	2174.4 lm/m	F
4000 K	166.6 lm/W	3332.4 lm/m	C	135 lm/W	2699.4 lm/m	E	111.4 lm/W	2228.4 lm/m	E
5000 K	166.4 lm/W	3328.7 lm/m	C	134.9 lm/W	2697.6 lm/m	E	111.3 lm/W	2226 lm/m	E
6500 K	159.5 lm/W	3190.9 lm/m	D	129.5 lm/W	2589.6 lm/m	E	107.5 lm/W	2150 lm/m	F

Grade KE (3rd Tier) · 22W/m

Grade KE (3rd Tier) · 22W/m — measured at 22 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	124.6 lm/W	2742.2 lm/m	E	100 lm/W	2201 lm/m	F	—	—	—
2300 K	139 lm/W	3057.2 lm/m	D	111.5 lm/W	2453.4 lm/m	E	90.3 lm/W	1986.6 lm/m	F
2700 K	149.8 lm/W	3295.5 lm/m	D	121 lm/W	2661.4 lm/m	E	98 lm/W	2156.6 lm/m	F
3000 K	157.3 lm/W	3461.1 lm/m	D	127.8 lm/W	2810.8 lm/m	E	103.9 lm/W	2285.8 lm/m	F
3500 K	159.6 lm/W	3511.5 lm/m	D	130.2 lm/W	2865.4 lm/m	E	107.2 lm/W	2358.5 lm/m	F
4000 K	164.3 lm/W	3614.5 lm/m	C	133.1 lm/W	2928 lm/m	E	109.9 lm/W	2417.1 lm/m	F
5000 K	164.1 lm/W	3610.5 lm/m	C	133 lm/W	2925.9 lm/m	E	109.7 lm/W	2413.4 lm/m	F
6500 K	157.3 lm/W	3461.1 lm/m	D	127.7 lm/W	2808.8 lm/m	E	106 lm/W	2332 lm/m	F

Grade KE (3rd Tier) · 24W/m

Grade KE (3rd Tier) · 24W/m — measured at 24 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	122.9 lm/W	2949.7 lm/m	E	98.7 lm/W	2367.6 lm/m	F	—	—	—
2300 K	137 lm/W	3288.6 lm/m	D	110 lm/W	2639.1 lm/m	F	89.1 lm/W	2138.4 lm/m	F
2700 K	147.7 lm/W	3544.9 lm/m	D	119.3 lm/W	2862.9 lm/m	E	96.7 lm/W	2319.8 lm/m	F
3000 K	155.1 lm/W	3723 lm/m	D	126 lm/W	3023.6 lm/m	E	102.5 lm/W	2458.8 lm/m	F
3500 K	157.4 lm/W	3777.3 lm/m	D	128.4 lm/W	3082.2 lm/m	E	105.7 lm/W	2537 lm/m	F
4000 K	162 lm/W	3888.1 lm/m	C	131.2 lm/W	3149.6 lm/m	E	108.3 lm/W	2600 lm/m	F
5000 K	161.8 lm/W	3883.8 lm/m	C	131.1 lm/W	3147.4 lm/m	E	108.2 lm/W	2596.8 lm/m	F
6500 K	155.1 lm/W	3723 lm/m	D	125.9 lm/W	3021.4 lm/m	E	104.5 lm/W	2508 lm/m	F

High-Power LED Strip: Heat Dissipation & Aluminum Channel Guide

At up to 24W/m, 3410 is a high-power SMD LED strip. Above roughly 14.4W/m the tape can no longer shed its own heat through the FPC alone — an aluminum channel is part of the luminaire, not an accessory.

Why high-wattage strips need a heat sink

Aluminum conducts heat roughly 30× faster than the plastics, MDF or gypsum a strip is usually stuck to, so a bare high-power run traps heat under the tape.
LED lifetime (LM-80 / TM-21) is driven by solder-point temperature Tc. Keeping Tc inside the datasheet limit — DENO strips are rated Tc ≤ 75°C — is what preserves the rated L70 lifetime and colour stability.
Never run 14.4W/m or more coiled on the reel, inside a sealed plastic diffuser, or directly on wood, wallpaper or foam.

Sizing rule: FPC width vs channel inner width

Channel inner width ≥ FPC width + 2mm. This strip is 12mm wide, so it needs at least 14mm of inner width.
The 2mm clearance absorbs extrusion tolerance and lets the tape be seated or replaced without scraping the side walls or the wiring.
A frosted or opal PC cover then diffuses the higher lumen output into an even, dot-free line instead of visible hot spots.

Aluminum channels that fit this strip

Recommended LED Channels

Mount this LED strip in a DENO LED aluminum profile for heat dissipation, physical protection and diffused, dot-free output.

This strip is 12mm wide, so it needs a channel with at least 14mm inner width (12mm + 2mm clearance). Every profile below meets that.

Modelos relacionados nesta série

See every model in SMD LED Strip Series or narrow to High Efficiency. Compare wattage, lumen output and run length in the ProCalc parameter library, or request OEM/ODM pricing on the custom manufacturing page.

Perguntas Frequentes

Quais são as principais especificações do 3410?

3410: 2835, 160 LEDs/m, 24V, 12 PCB, FPCB de cobre de 3oz, corte a cada 8LEDs/50mm. Dados fotométricos completos, diagramas de ligação e relatórios de ensaio estão disponíveis na seção de downloads desta página.

O que diferencia a construção desta Fita de LED com IC de corrente constante?

Ela é construída como uma Fita de LED com IC de corrente constante sobre FPCB de cobre de 3oz, com unidade de corte de 8LEDs/50mm e passo entre LEDs de 6.2mm, mantendo seu desempenho elétrico e mecânico onde as fitas padrão falham.

A DENO pode personalizar esta Fita de LED com IC de corrente constante para um projeto?

Sim. A DENO fabrica a série de Fitas SMD C.C. (Reguladas por IC) como fornecedora OEM e ODM: comprimento do rolo, temperatura de cor, classificação de IRC (CRI), largura da PCB, impermeabilização e identificação com marca própria podem ser especificados. Solicite um Orçamento para consultar o prazo de entrega e os preços para o projeto.

Quanto uma Fita de LED de alta eficácia pode reduzir o consumo de energia?

A troca de uma fita típica de 100 lm/W por uma Fita de LED de alto fluxo luminoso de 180 a 200 lm/W reduz aproximadamente pela metade a potência necessária para o mesmo fluxo luminoso. Em um trecho comercial longo, isso também reduz a potência necessária do Driver / Fonte de Alimentação e ajuda a instalação a alcançar uma classe energética ErP melhor.

Uma Fita de LED de corrente constante realmente elimina a queda de tensão?

A tensão ainda cai ao longo do cobre, mas o IC de corrente constante de cada segmento mantém a corrente dos LEDs fixa até que a tensão local caia abaixo do seu limite mínimo de regulação. Assim, o brilho permanece uniforme de ponta a ponta, e a alimentação pode ser aplicada em uma extremidade, nas duas extremidades ou em qualquer ponto intermediário do trecho.

Engineering & selection guide

Bending limits, IP selection, voltage drop, cutting and the full buyer Q&A for this family are kept on the series page.

High Efficiency LED Strips series — High Efficiency LED Strip — Buyer Questions
LED strip engineering selection handbook