What counts as a high efficiency LED strip in lumens per watt?

In 2026 a mainstream 24V 2835 board sits around 120-140 lm/W. A high efficiency LED strip starts at roughly 160 lm/W and DENO's top binned 2835 and 2110 boards are measured at up to 200 lm/W at 4000K Ra 80, LM-79 tested at 25 degrees Celsius. The figure is light-source efficacy of the tape itself, measured without the driver, which is exactly how the ErP energy label is calculated.

What is the difference between high efficiency and high efficacy LED strip lights?

They describe the same measurement. Efficacy is the engineering term for lumens delivered per watt consumed; efficiency is how buyers and tender documents usually phrase it. DENO publishes lm/W per model so both audiences read the same number, and the ErP energy class printed on the reel is derived from it.

Which ErP energy class can a high efficiency LED strip reach?

Class C is achievable on the best-binned 2835 and 2110 boards above 180 lm/W, class D covers the 160-180 lm/W band and most well-specified architectural tape lands in class E. High-CRI 95+ and full spectrum builds drop one or two classes because phosphor conversion costs lumens. Every DENO datasheet states the measured class so it can be reproduced by a notified body.

Does a high efficiency LED strip run cooler and last longer?

Yes. Fewer watts per lumen means less heat into the FPCB, so junction temperature drops and L70 lifetime extends. Combined with 2 oz copper and a 99.9% pure copper foil the same brightness can be produced at 20-30% lower wattage, which also lets a single driver feed a longer run and keeps aluminium profiles below the touch-temperature limits used in hospitality projects.

How much energy does a high efficiency LED strip save on a large project?

Take 500 m of cove lighting at 10 hours a day. A 130 lm/W board delivering 1000 lm/m draws about 7.7 W/m; a 190 lm/W board delivers the same output at about 5.3 W/m. Across 500 m that is 1.2 kW saved, roughly 4,380 kWh a year, and it usually removes one driver and one circuit from the electrical schedule as well.

Can I get a high efficiency LED strip in 12V, 24V, 36V or 48V?

24V is the efficiency sweet spot and carries the full binned range. 12V is available where fixture space or existing drivers dictate it, at the cost of shorter single-feed runs. 36V and 48V constant-current boards keep the same lm/W while extending a single feed well past 20 m, which is where the real system efficiency gain shows up on long architectural lines.

Fita de LED 2835 Clássica de Alta Eficiência e Desempenho Estável (#11586-N)

10mm · 24V · 192LEDs · 41.667corte

Model: 11586-N

11586-N 10mm | 24V | 192LEDs | 41.667corte | #11586-N | Fita de LED 2835 Clássica de Alta Eficiência e Desempenho Estável — 24V, cuttable every 41.7mm, 10mm FPCB width, 2835 LEDs, 192 LEDs/m, 1800-6500

Visão Geral

10mm | 24V | 192LEDs | 41.667cut | #11586-N | A Fita de LED 2835 Clássica Estável de Alta Eficiência faz parte da série de Fitas de LED de Alta Densidade da DENO, desenvolvida com base em Fita de LED de Ultra Alta Densidade. Principais especificações: 2835, 192, 24V, PCB de 10mm, FPCB com cobre de 3 oz, corte a cada 8LEDs/41.667mm, IP20/IP54/IP65/IP66/IP67/IP68, IRC (CRI) Ra≥80 , Ra≥90 , Ra≥95 , FS. Cada rolo é produzido na linha rolo a rolo da DENO com FPCB de cobre com pureza de 99.9% e fornecido em conformidade com CE, UL e RoHS para projetos arquitetônicos, de varejo e de hotelaria. Configurações OEM e ODM de comprimento, temperatura de cor e impermeabilização estão disponíveis mediante solicitação.

Descrição

Equipada com LEDs 2835 SMD de alta eficiência, esta Fita de LED oferece iluminação uniforme e desempenho confiável para ambientes exigentes. Um layout denso de 192 LEDs por metro em uma PCB de 10mm proporciona emissão de luz uniforme, com intervalos curtos de corte de 41.667mm. A arquitetura de tensão constante de 24V permite integração de dimerização suave com sistemas de controle PWM, DALI e 0/1-10V. Desenvolvida para iluminação decorativa arquitetônica e aplicações comerciais, a DENO oferece entrega direta da fábrica e comprimentos personalizados OEM para empresas instaladoras.

We use 99.99% gold wire, large-size chips, and thickened FPCB, backed by a 5-year warranty.

Especificações

CCT (K)	1800-6500
CRI	Ra≥80 , Ra≥90 , Ra≥95 , FS
SDCM	< 3 SDCM (Single Bin)
POWER (W/M)	18 W/m
LED QTY	192
PART NO	DL-F28A96V24-11586-N-*
SMD TYPE	2835
CUTTABLE UNIT	8LEDs/41.667mm
DIMMABLE	Yes
IP RATING	IP20/IP54/IP65/IP66/IP67/IP68
LED PITCH	5.209mm
LIFESPAN	50000h
PCB WIDTH	10mm
WARRANTY	5 Years
BEAM ANGLE	120°
RUN LENGTH	5m
COPPER FOIL	3 oz
ON OFF TIMES	10000 (test times)
POWER RANGE	2.8~24W
CIRCUIT TYPE	C.V.
INPUT VOLTAGE	24V
LUMINOUS FLUX	2797 lm/m
MIN BEND DIAMETER	Φ60mm
OPERATING TEMPERATURE	-25~40°C;Tc: 75°C (max)

Aplicações

Cove, wall-wash & perimeter lighting — Coves, recesses, wall-wash details and ceiling perimeters where a continuous, uniform line of light is required.
Showroom & hospitality display lighting — Shelving, display cases, reception desks and signage backlighting in shops, showrooms and hospitality spaces.
Kitchen & wardrobe under-cabinet lighting — Kitchen, wardrobe and furniture task lighting where the strip stays hidden and only the light is seen.

Acessórios recomendados e peças compatíveis

DL-1003 — 19.1x8mm Surface Mount LED Channel — Dotless Aluminum Profile for 240 LEDs/m Strip: Accepts LED strips up to 10mm wide.
DL-1103-1 — 16x13mm Surface Mount LED Channel — Aluminum Profile for 10mm LED Strip: Accepts LED strips up to 10mm wide.
DL-1510 HX-F — 15x9.9mm Recessed LED Channel with Flange — Flush Mount Aluminum Profile: Accepts LED strips up to 10mm wide.
DN-PSU-100 — 24V 100W Class-2 LED Driver · High Efficiency: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
DN-PSU-150 — 24V 150W Class-2 LED Driver · Premium: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
DN-PSU-60 — 24V 60W Class-2 LED Driver · Constant Voltage: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
V1 — 5-36VDC 1-Channel * 8A RF+Push Dimming Controller | V1: Matched by input voltage range and colour channels.

Solicite um orçamento para #11586-N

A DENO LED é uma fabricante de fitas de LED com sede em Shenzhen e base de produção própria em Foshan. Envie-nos o comprimento do trecho, tensão, CCT/IRC e grau de proteção IP que você precisa e nossa equipe de engenharia responderá com uma ficha técnica, diagrama de fiação e preço — OEM/ODM e projetos totalmente personalizados incluídos.

WhatsApp para nossa engenharia Formulário de contato Capacidade OEM / ODM

Garantia: 5 anos
Prazo de entrega: Placas padrão: amostras a partir de 1 dia útil · personalizadas: 3–5 dias úteis · nova FPCB: 1–3 semanas · produção 1–2 semanas após aprovação da amostra
Conformidade: CE · ETL · UL · RoHS
Fio de ligação: Ouro puro 99,99%
Folha de cobre: FPCB de cobre puro 99,9%
Serviços: CCT, IRC, largura de PCB, unidade de corte e embalagem personalizadas — amostras e produção em massa de uma única fábrica.

Desempenho Fotométrico — Matriz de Eficácia CCT × IRC (CRI)

Peak measured luminous efficacy: 202.8 lm/W at 4000K, Ra 80, ErP energy class B (Grade DL (2nd Tier) · 11.5W/m).

All values are measured at the stated power density and ambient 25 °C, reported as luminous efficacy in lumens per watt (lm/W), luminous flux per metre (lm/m) and the corresponding EU ErP (2019/2015) energy class.

Grade DL (2nd Tier) · 11.5W/m

Grade DL (2nd Tier) · 11.5W/m — measured at 11.5 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	154.5 lm/W	1777.2 lm/m	D	124.1 lm/W	1426.7 lm/m	E	—	—	—
2300 K	172.1 lm/W	1979.4 lm/m	C	138.2 lm/W	1589.7 lm/m	D	112 lm/W	1288 lm/m	E
2700 K	182.1 lm/W	2094.6 lm/m	C	149.5 lm/W	1719.6 lm/m	D	121.2 lm/W	1393.6 lm/m	E
3000 K	193.8 lm/W	2228.2 lm/m	B	157.4 lm/W	1810.3 lm/m	D	128 lm/W	1472 lm/m	E
3500 K	196.5 lm/W	2260.1 lm/m	B	160.2 lm/W	1842.2 lm/m	C	131.8 lm/W	1516.1 lm/m	E
4000 K	202.8 lm/W	2332.4 lm/m	B	164 lm/W	1886.3 lm/m	C	135.5 lm/W	1557.8 lm/m	D
5000 K	202.6 lm/W	2330 lm/m	B	163.9 lm/W	1885.1 lm/m	C	135.2 lm/W	1554.8 lm/m	D
6500 K	185.8 lm/W	2136.3 lm/m	B	157.3 lm/W	1809.1 lm/m	D	130.6 lm/W	1501.9 lm/m	E

Grade DL (2nd Tier) · 17.3W/m

Grade DL (2nd Tier) · 17.3W/m — measured at 17.3 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	148.4 lm/W	2566.8 lm/m	D	119.1 lm/W	2060.5 lm/m	E	—	—	—
2300 K	165.3 lm/W	2858.9 lm/m	C	132.7 lm/W	2295.9 lm/m	E	107.5 lm/W	1859.8 lm/m	F
2700 K	174.9 lm/W	3025.3 lm/m	C	143.6 lm/W	2483.6 lm/m	D	116.3 lm/W	2012.7 lm/m	E
3000 K	186 lm/W	3218.2 lm/m	B	151.1 lm/W	2614.6 lm/m	D	122.9 lm/W	2126 lm/m	E
3500 K	188.7 lm/W	3264.2 lm/m	B	153.8 lm/W	2660.6 lm/m	D	126.6 lm/W	2189.7 lm/m	E
4000 K	194.7 lm/W	3368.7 lm/m	B	157.5 lm/W	2724.3 lm/m	D	130.1 lm/W	2249.9 lm/m	E
5000 K	194.5 lm/W	3365.1 lm/m	B	157.4 lm/W	2722.6 lm/m	D	129.8 lm/W	2245.5 lm/m	E
6500 K	178.4 lm/W	3085.5 lm/m	C	151 lm/W	2612.8 lm/m	D	125.4 lm/W	2169.4 lm/m	E

Grade DL (2nd Tier) · 20.2W/m

Grade DL (2nd Tier) · 20.2W/m — measured at 20.2 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	145.4 lm/W	2936.6 lm/m	D	116.7 lm/W	2357.4 lm/m	E	—	—	—
2300 K	161.9 lm/W	3270.8 lm/m	C	130 lm/W	2626.8 lm/m	E	105.3 lm/W	2127.1 lm/m	F
2700 K	171.3 lm/W	3461.2 lm/m	C	140.7 lm/W	2841.4 lm/m	D	114 lm/W	2302.7 lm/m	E
3000 K	182.3 lm/W	3681.9 lm/m	C	148.1 lm/W	2991.3 lm/m	D	120.4 lm/W	2432.3 lm/m	E
3500 K	184.9 lm/W	3734.6 lm/m	C	150.7 lm/W	3044 lm/m	D	124 lm/W	2505.2 lm/m	E
4000 K	190.8 lm/W	3854.1 lm/m	B	154.3 lm/W	3116.9 lm/m	D	127.4 lm/W	2574.1 lm/m	E
5000 K	190.6 lm/W	3850 lm/m	B	154.2 lm/W	3114.8 lm/m	D	127.2 lm/W	2569.4 lm/m	E
6500 K	174.8 lm/W	3530 lm/m	C	148 lm/W	2989.3 lm/m	D	122.8 lm/W	2480.6 lm/m	E

Grade DN (1st Tier) · 11.5W/m

Grade DN (1st Tier) · 11.5W/m — measured at 11.5 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	148.7 lm/W	1709.8 lm/m	D	125.2 lm/W	1440.1 lm/m	E	—	—	—
2300 K	162.1 lm/W	1864.2 lm/m	D	139.8 lm/W	1608.1 lm/m	E	113.3 lm/W	1303 lm/m	F
2700 K	174.7 lm/W	2008.8 lm/m	C	151.2 lm/W	1739.2 lm/m	D	122.6 lm/W	1409.5 lm/m	E
3000 K	183.5 lm/W	2110.6 lm/m	C	159.7 lm/W	1836 lm/m	D	129.9 lm/W	1494.1 lm/m	E
3500 K	186.2 lm/W	2141.2 lm/m	C	163.2 lm/W	1876.5 lm/m	D	134.3 lm/W	1544.3 lm/m	E
4000 K	189.7 lm/W	2181.7 lm/m	C	164 lm/W	1886.3 lm/m	D	135.5 lm/W	1557.8 lm/m	E
5000 K	189.4 lm/W	2178 lm/m	C	165.1 lm/W	1898.5 lm/m	D	136.2 lm/W	1566.3 lm/m	E
6500 K	181.6 lm/W	2088.5 lm/m	C	157.8 lm/W	1815.2 lm/m	D	131 lm/W	1506.5 lm/m	E

Grade DN (1st Tier) · 17.3W/m

Grade DN (1st Tier) · 17.3W/m — measured at 17.3 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	142.7 lm/W	2469.4 lm/m	E	120.2 lm/W	2080 lm/m	E	—	—	—
2300 K	155.6 lm/W	2692.5 lm/m	D	134.2 lm/W	2322.5 lm/m	E	108.7 lm/W	1880.5 lm/m	F
2700 K	167.7 lm/W	2901.4 lm/m	D	145.2 lm/W	2511.9 lm/m	E	117.7 lm/W	2035.7 lm/m	F
3000 K	176.2 lm/W	3048.3 lm/m	C	153.3 lm/W	2651.8 lm/m	D	124.7 lm/W	2157.9 lm/m	E
3500 K	178.8 lm/W	3092.5 lm/m	C	156.7 lm/W	2710.2 lm/m	D	128.9 lm/W	2230.5 lm/m	E
4000 K	182.1 lm/W	3151 lm/m	C	157.5 lm/W	2724.3 lm/m	D	130.1 lm/W	2249.9 lm/m	E
5000 K	181.8 lm/W	3145.6 lm/m	C	158.5 lm/W	2742 lm/m	D	130.8 lm/W	2262.8 lm/m	E
6500 K	174.4 lm/W	3016.4 lm/m	C	151.5 lm/W	2621.7 lm/m	D	125.8 lm/W	2176.3 lm/m	E

Grade DN (1st Tier) · 20.2W/m

Grade DN (1st Tier) · 20.2W/m — measured at 20.2 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	139.9 lm/W	2825.2 lm/m	E	117.8 lm/W	2379.7 lm/m	F	—	—	—
2300 K	152.5 lm/W	3080.4 lm/m	D	131.5 lm/W	2657.1 lm/m	E	106.5 lm/W	2151.3 lm/m	F
2700 K	164.3 lm/W	3319.4 lm/m	D	142.3 lm/W	2873.8 lm/m	E	115.3 lm/W	2329 lm/m	F
3000 K	172.6 lm/W	3487.5 lm/m	D	150.2 lm/W	3033.8 lm/m	D	122.2 lm/W	2468.8 lm/m	E
3500 K	175.2 lm/W	3538.1 lm/m	C	153.5 lm/W	3100.7 lm/m	D	126.3 lm/W	2551.8 lm/m	E
4000 K	178.5 lm/W	3605 lm/m	C	154.3 lm/W	3116.9 lm/m	D	127.4 lm/W	2574.1 lm/m	E
5000 K	178.2 lm/W	3598.9 lm/m	C	155.3 lm/W	3137.1 lm/m	D	128.1 lm/W	2587.6 lm/m	E
6500 K	170.8 lm/W	3451 lm/m	D	148.5 lm/W	2999.4 lm/m	D	123.2 lm/W	2488.6 lm/m	E

Grade KE (3rd Tier) · 11.5W/m

Grade KE (3rd Tier) · 11.5W/m — measured at 11.5 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	153.7 lm/W	1767.4 lm/m	D	123.4 lm/W	1419.3 lm/m	E	—	—	—
2300 K	171.3 lm/W	1969.6 lm/m	C	137.5 lm/W	1581.1 lm/m	D	111.4 lm/W	1281.1 lm/m	E
2700 K	184.6 lm/W	2122.8 lm/m	C	149.2 lm/W	1715.9 lm/m	D	121 lm/W	1391.1 lm/m	E
3000 K	193.9 lm/W	2229.5 lm/m	B	157.5 lm/W	1811.5 lm/m	D	128.1 lm/W	1473.2 lm/m	E
3500 K	196.7 lm/W	2262.6 lm/m	B	160.6 lm/W	1847.1 lm/m	C	132.2 lm/W	1519.8 lm/m	E
4000 K	202.5 lm/W	2328.7 lm/m	B	164 lm/W	1886.3 lm/m	C	135.5 lm/W	1557.8 lm/m	D
5000 K	202.2 lm/W	2325.1 lm/m	B	164 lm/W	1886.3 lm/m	C	135.3 lm/W	1556 lm/m	D
6500 K	193.9 lm/W	2229.5 lm/m	B	157.5 lm/W	1811.5 lm/m	D	130.7 lm/W	1503.1 lm/m	E

Grade KE (3rd Tier) · 17.3W/m

Grade KE (3rd Tier) · 17.3W/m — measured at 17.3 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	147.6 lm/W	2552.6 lm/m	D	118.5 lm/W	2049.9 lm/m	E	—	—	—
2300 K	164.4 lm/W	2844.7 lm/m	C	132 lm/W	2283.6 lm/m	E	106.9 lm/W	1849.4 lm/m	F
2700 K	177.2 lm/W	3066 lm/m	C	143.3 lm/W	2478.3 lm/m	D	116.1 lm/W	2009.2 lm/m	E
3000 K	186.1 lm/W	3220 lm/m	B	151.2 lm/W	2616.4 lm/m	D	123 lm/W	2127.8 lm/m	E
3500 K	188.9 lm/W	3267.8 lm/m	B	154.2 lm/W	2667.7 lm/m	D	126.9 lm/W	2195 lm/m	E
4000 K	194.4 lm/W	3363.4 lm/m	B	157.5 lm/W	2724.3 lm/m	D	130.1 lm/W	2249.9 lm/m	E
5000 K	194.1 lm/W	3358.1 lm/m	B	157.5 lm/W	2724.3 lm/m	D	129.9 lm/W	2247.3 lm/m	E
6500 K	186.1 lm/W	3220 lm/m	B	151.2 lm/W	2616.4 lm/m	D	125.5 lm/W	2171.2 lm/m	E

Grade KE (3rd Tier) · 20.2W/m

Grade KE (3rd Tier) · 20.2W/m — measured at 20.2 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	144.6 lm/W	2920.4 lm/m	D	116.1 lm/W	2345.2 lm/m	E	—	—	—
2300 K	161.1 lm/W	3254.6 lm/m	C	129.3 lm/W	2612.6 lm/m	E	104.8 lm/W	2117 lm/m	F
2700 K	173.7 lm/W	3507.7 lm/m	C	140.4 lm/W	2835.4 lm/m	D	113.8 lm/W	2298.7 lm/m	E
3000 K	182.4 lm/W	3683.9 lm/m	C	148.2 lm/W	2993.3 lm/m	D	120.5 lm/W	2434.4 lm/m	E
3500 K	185.1 lm/W	3738.6 lm/m	B	151.1 lm/W	3052.1 lm/m	D	124.3 lm/W	2511.3 lm/m	E
4000 K	190.5 lm/W	3848 lm/m	B	154.3 lm/W	3116.9 lm/m	D	127.4 lm/W	2574.1 lm/m	E
5000 K	190.2 lm/W	3841.9 lm/m	B	154.3 lm/W	3116.9 lm/m	D	127.3 lm/W	2571.5 lm/m	E
6500 K	182.4 lm/W	3683.9 lm/m	C	148.2 lm/W	2993.3 lm/m	D	123 lm/W	2484.6 lm/m	E

High-Power LED Strip: Heat Dissipation & Aluminum Channel Guide

At up to 20.2W/m, 11586-N is a high-power SMD LED strip. Above roughly 14.4W/m the tape can no longer shed its own heat through the FPC alone — an aluminum channel is part of the luminaire, not an accessory.

Why high-wattage strips need a heat sink

Aluminum conducts heat roughly 30× faster than the plastics, MDF or gypsum a strip is usually stuck to, so a bare high-power run traps heat under the tape.
LED lifetime (LM-80 / TM-21) is driven by solder-point temperature Tc. Keeping Tc inside the datasheet limit — DENO strips are rated Tc ≤ 75°C — is what preserves the rated L70 lifetime and colour stability.
Never run 14.4W/m or more coiled on the reel, inside a sealed plastic diffuser, or directly on wood, wallpaper or foam.

Sizing rule: FPC width vs channel inner width

Channel inner width ≥ FPC width + 2mm. This strip is 10mm wide, so it needs at least 12mm of inner width.
The 2mm clearance absorbs extrusion tolerance and lets the tape be seated or replaced without scraping the side walls or the wiring.
A frosted or opal PC cover then diffuses the higher lumen output into an even, dot-free line instead of visible hot spots.

Aluminum channels that fit this strip

Recommended LED Channels

Mount this LED strip in a DENO LED aluminum profile for heat dissipation, physical protection and diffused, dot-free output.

This strip is 10mm wide, so it needs a channel with at least 12mm inner width (10mm + 2mm clearance). Every profile below meets that.

Modelos relacionados nesta série

See every model in SMD LED Strip Series or narrow to High Efficiency. Compare wattage, lumen output and run length in the ProCalc parameter library, or request OEM/ODM pricing on the custom manufacturing page.

Perguntas Frequentes

Quais são as principais especificações do 11586-N?

11586-N: 2835, 192, 24V, PCB de 10mm, FPCB com cobre de 3 oz, corte a cada 8LEDs/41.667mm, IP20/IP54/IP65/IP66/IP67/IP68, IRC (CRI) Ra≥80 , Ra≥90 , Ra≥95 , FS. Dados fotométricos completos, diagramas de ligação e relatórios de ensaio estão disponíveis na seção de downloads desta página.

Qual é o comprimento máximo de um único trecho desta Fita de LED de Ultra Alta Densidade?

O comprimento máximo de um único trecho deste modelo é 5m. A alimentação pelas duas extremidades ou por um ponto central reduz à metade a distância efetiva por segmento. Assim, uma Fita de LED de Ultra Alta Densidade pode cobrir o dobro desse comprimento em um único circuito quando conectada dessa forma.

A DENO pode personalizar esta Fita de LED de Ultra Alta Densidade para um projeto?

Sim. A DENO fabrica a série de Fitas de LED de Alta Densidade como fornecedora OEM e ODM: comprimento do rolo, temperatura de cor, classificação de IRC (CRI), largura da PCB, impermeabilização e identificação com marca própria podem ser especificados. Solicite um Orçamento para consultar o prazo de entrega e os preços para o projeto.

Quanto uma Fita de LED de alta eficácia luminosa pode reduzir o consumo de energia?

A substituição de uma fita típica de 100 lm/W por uma Fita de LED de alto fluxo luminoso de 180 a 200 lm/W reduz aproximadamente à metade a potência necessária para o mesmo fluxo luminoso. Em um trecho comercial longo, isso também reduz a potência necessária do Driver / Fonte de Alimentação e ajuda a instalação a atingir uma classe energética ErP melhor.

Quantos LEDs por metro uma Fita de LED precisa ter para não apresentar pontos visíveis?

A visibilidade dos pontos depende do espaçamento entre LEDs, da distância do difusor e da transmitância. Acima de aproximadamente 480 LEDs/m, a maioria dos difusores proporciona uma linha contínua a uma profundidade de 10 mm, e a Fita de LED de Alta Densidade com 700 LEDs/m permanece sem pontos visíveis mesmo atrás de uma lente rasa e de alta transmitância.

Engineering & selection guide

Bending limits, IP selection, voltage drop, cutting and the full buyer Q&A for this family are kept on the series page.

High Efficiency LED Strips series — High Efficiency LED Strip — Buyer Questions
LED strip engineering selection handbook