What counts as a high efficiency LED strip in lumens per watt?

In 2026 a mainstream 24V 2835 board sits around 120-140 lm/W. A high efficiency LED strip starts at roughly 160 lm/W and DENO's top binned 2835 and 2110 boards are measured at up to 200 lm/W at 4000K Ra 80, LM-79 tested at 25 degrees Celsius. The figure is light-source efficacy of the tape itself, measured without the driver, which is exactly how the ErP energy label is calculated.

What is the difference between high efficiency and high efficacy LED strip lights?

They describe the same measurement. Efficacy is the engineering term for lumens delivered per watt consumed; efficiency is how buyers and tender documents usually phrase it. DENO publishes lm/W per model so both audiences read the same number, and the ErP energy class printed on the reel is derived from it.

Which ErP energy class can a high efficiency LED strip reach?

Class C is achievable on the best-binned 2835 and 2110 boards above 180 lm/W, class D covers the 160-180 lm/W band and most well-specified architectural tape lands in class E. High-CRI 95+ and full spectrum builds drop one or two classes because phosphor conversion costs lumens. Every DENO datasheet states the measured class so it can be reproduced by a notified body.

Does a high efficiency LED strip run cooler and last longer?

Yes. Fewer watts per lumen means less heat into the FPCB, so junction temperature drops and L70 lifetime extends. Combined with 2 oz copper and a 99.9% pure copper foil the same brightness can be produced at 20-30% lower wattage, which also lets a single driver feed a longer run and keeps aluminium profiles below the touch-temperature limits used in hospitality projects.

How much energy does a high efficiency LED strip save on a large project?

Take 500 m of cove lighting at 10 hours a day. A 130 lm/W board delivering 1000 lm/m draws about 7.7 W/m; a 190 lm/W board delivers the same output at about 5.3 W/m. Across 500 m that is 1.2 kW saved, roughly 4,380 kWh a year, and it usually removes one driver and one circuit from the electrical schedule as well.

Can I get a high efficiency LED strip in 12V, 24V, 36V or 48V?

24V is the efficiency sweet spot and carries the full binned range. 12V is available where fixture space or existing drivers dictate it, at the cost of shorter single-feed runs. 36V and 48V constant-current boards keep the same lm/W while extending a single feed well past 20 m, which is where the real system efficiency gain shows up on long architectural lines.

Fita de LED 2835 de Alta Eficácia Luminosa (#11076)

8mm · 24V · 70LEDs · 100mm/corte

Model: 11076

11076 8mm | 24V | 70LEDs | 100mm/corte | #11076 | Fita de LED 2835 de Alta Eficácia Luminosa — 24V, cuttable every 100mm, 8mm FPCB width, 2835 LEDs, 70 LEDs/m, IP20

Visão Geral

8mm | 24V | 70LEDs | 100mm/corte | #11076 | Fita de LED 2835 de Alta Eficácia Luminosa faz parte da série de Fitas de LED SMD Clássicas da DENO, desenvolvida com base em Fitas de LED SMD de 24V. Principais especificações: 2835, 70 LEDs/m, 24V, PCB de 8, FPCB com cobre de 3oz, corte a cada 7LEDs/100mm. Cada rolo é produzido na linha roll-to-roll da DENO com FPCB de cobre com pureza de 99.9% e é fornecido em conformidade com CE, UL e RoHS para projetos arquitetônicos, de varejo e de hotelaria. Configurações OEM e ODM de comprimento, temperatura de cor e impermeabilização estão disponíveis sob consulta.

Descrição

Equipada com LEDs SMD 2835 de alta eficácia que fornecem até 173 lm/W, esta Fita de LED de 24V é ideal para projetos de iluminação arquitetônica com economia de energia. A PCB estreita de 8mm foi projetada com folha de cobre robusta de 3oz para garantir dissipação térmica ideal e desempenho estável em tensão constante. Um trecho contínuo de 5 metros mantém o brilho uniforme e a alta eficiência luminosa sem queda de tensão perceptível em todo o circuito. Configurada com 70 LEDs por metro e segmentos de corte de 100mm, a DENO oferece comprimentos personalizados OEM diretamente da fábrica para integração versátil em luminárias lineares. Totalmente dimerizável e com amplo ângulo de facho de 120 graus, este circuito flexível se integra facilmente a canais de alumínio e espaços de instalação reduzidos.

We use 99.99% gold wire, large-size chips, and thickened FPCB, backed by a 5-year warranty.

Especificações

LED QTY	70 LEDs/m
PART NO	DL-F28A35V24-11076-*
SMD TYPE	2835
CUTTABLE UNIT	7LEDs/100mm
DIMMABLE	Yes
IP RATING	IP20
LED PITCH	14.2mm
PCB WIDTH	8
BEAM ANGLE	120°
RUN LENGTH	5m
COPPER FOIL	3oz
ON OFF TIMES	10000（test times）
POWER RANGE	1.2~7.2W
CIRCUIT TYPE	C.V.
INPUT VOLTAGE	24V
MIN BEND DIAMETER	Φ60mm
OPERATING TEMPERATURE	-25~40°C;Tc：75°C（max）

Aplicações

Cove, wall-wash & perimeter lighting — Coves, recesses, wall-wash details and ceiling perimeters where a continuous, uniform line of light is required.
Showroom & hospitality display lighting — Shelving, display cases, reception desks and signage backlighting in shops, showrooms and hospitality spaces.
Kitchen & wardrobe under-cabinet lighting — Kitchen, wardrobe and furniture task lighting where the strip stays hidden and only the light is seen.

Acessórios recomendados e peças compatíveis

DL-1215 — 12x15mm Surface Mount LED Channel — Tall U Shape Aluminum Profile: Accepts LED strips up to 8mm wide.
DL-1313HX-M — 13x13mm Magnetic Cabinet LED Channel — Tool-Free Corner Aluminum Profile: Accepts LED strips up to 8mm wide.
DL-1408 HX — 14x8mm Surface Mount LED Channel — Slim Aluminum Profile for 8mm Strip: Accepts LED strips up to 8mm wide.
DN-PSU-100 — 24V 100W Class-2 LED Driver · High Efficiency: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
DN-PSU-150 — 24V 150W Class-2 LED Driver · Premium: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
DN-PSU-60 — 24V 60W Class-2 LED Driver · Constant Voltage: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
V1 — 5-36VDC 1-Channel * 8A RF+Push Dimming Controller | V1: Matched by input voltage range and colour channels.

Solicite um orçamento para #11076

A DENO LED é uma fabricante de fitas de LED com sede em Shenzhen e base de produção própria em Foshan. Envie-nos o comprimento do trecho, tensão, CCT/IRC e grau de proteção IP que você precisa e nossa equipe de engenharia responderá com uma ficha técnica, diagrama de fiação e preço — OEM/ODM e projetos totalmente personalizados incluídos.

WhatsApp para nossa engenharia Formulário de contato Capacidade OEM / ODM

Garantia: 5 anos
Prazo de entrega: Placas padrão: amostras a partir de 1 dia útil · personalizadas: 3–5 dias úteis · nova FPCB: 1–3 semanas · produção 1–2 semanas após aprovação da amostra
Conformidade: CE · ETL · UL · RoHS
Fio de ligação: Ouro puro 99,99%
Folha de cobre: FPCB de cobre puro 99,9%
Serviços: CCT, IRC, largura de PCB, unidade de corte e embalagem personalizadas — amostras e produção em massa de uma única fábrica.

Desempenho Fotométrico — Matriz de Eficácia CCT × IRC (CRI)

Peak measured luminous efficacy: 180.5 lm/W at 4000K, Ra 80, ErP energy class C (Grade DN (1st Tier) · 2.4W/m).

All values are measured at the stated power density and ambient 25 °C, reported as luminous efficacy in lumens per watt (lm/W), luminous flux per metre (lm/m) and the corresponding EU ErP (2019/2015) energy class.

Grade DL (2nd Tier) · 2.4W/m

Grade DL (2nd Tier) · 2.4W/m — measured at 2.4 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	131.4 lm/W	315.3 lm/m	E	105.3 lm/W	252.6 lm/m	F	—	—	—
2300 K	146.2 lm/W	351 lm/m	D	117.3 lm/W	281.5 lm/m	E	94.8 lm/W	227.5 lm/m	F
2700 K	154.5 lm/W	370.8 lm/m	D	127 lm/W	304.7 lm/m	E	102.9 lm/W	247 lm/m	F
3000 K	164.6 lm/W	395 lm/m	C	133.6 lm/W	320.6 lm/m	E	108.6 lm/W	260.7 lm/m	F
3500 K	167 lm/W	400.9 lm/m	C	135.9 lm/W	326.3 lm/m	D	111.9 lm/W	268.5 lm/m	E
4000 K	172.4 lm/W	413.8 lm/m	C	139.2 lm/W	334.1 lm/m	D	115 lm/W	275.9 lm/m	E
5000 K	172.2 lm/W	413.3 lm/m	C	139.2 lm/W	334.1 lm/m	D	115.3 lm/W	276.6 lm/m	E
6500 K	157.8 lm/W	378.6 lm/m	D	133.5 lm/W	320.4 lm/m	E	110.8 lm/W	265.9 lm/m	E

Grade DL (2nd Tier) · 3.6W/m

Grade DL (2nd Tier) · 3.6W/m — measured at 3.6 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	130.3 lm/W	468.9 lm/m	E	104.4 lm/W	375.8 lm/m	F	—	—	—
2300 K	145 lm/W	522 lm/m	D	116.3 lm/W	418.7 lm/m	E	94 lm/W	338.3 lm/m	F
2700 K	153.2 lm/W	551.5 lm/m	D	125.9 lm/W	453.3 lm/m	E	102.1 lm/W	367.4 lm/m	F
3000 K	163.2 lm/W	587.5 lm/m	C	132.5 lm/W	476.9 lm/m	E	107.7 lm/W	387.8 lm/m	F
3500 K	165.6 lm/W	596.2 lm/m	C	134.8 lm/W	485.3 lm/m	E	111 lm/W	399.4 lm/m	E
4000 K	171 lm/W	615.5 lm/m	C	138 lm/W	496.9 lm/m	D	114 lm/W	410.3 lm/m	E
5000 K	170.8 lm/W	614.8 lm/m	C	138 lm/W	496.9 lm/m	D	114.3 lm/W	411.4 lm/m	E
6500 K	156.4 lm/W	563.1 lm/m	D	132.4 lm/W	476.6 lm/m	E	109.8 lm/W	395.4 lm/m	F

Grade DL (2nd Tier) · 4.8W/m

Grade DL (2nd Tier) · 4.8W/m — measured at 4.8 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	129.2 lm/W	620 lm/m	E	103.5 lm/W	496.8 lm/m	F	—	—	—
2300 K	143.8 lm/W	690.2 lm/m	D	115.3 lm/W	553.6 lm/m	E	93.2 lm/W	447.3 lm/m	F
2700 K	151.9 lm/W	729.2 lm/m	D	124.9 lm/W	599.3 lm/m	E	101.2 lm/W	485.8 lm/m	F
3000 K	161.8 lm/W	776.8 lm/m	C	131.4 lm/W	630.6 lm/m	E	106.8 lm/W	512.7 lm/m	F
3500 K	164.2 lm/W	788.3 lm/m	C	133.7 lm/W	641.6 lm/m	E	110 lm/W	528.1 lm/m	E
4000 K	169.5 lm/W	813.8 lm/m	C	136.9 lm/W	657 lm/m	D	113 lm/W	542.5 lm/m	E
5000 K	169.3 lm/W	812.8 lm/m	C	136.9 lm/W	657 lm/m	D	113.3 lm/W	544 lm/m	E
6500 K	155.1 lm/W	744.5 lm/m	D	131.3 lm/W	630.1 lm/m	E	108.9 lm/W	522.8 lm/m	F

Grade DN (1st Tier) · 2.4W/m

Grade DN (1st Tier) · 2.4W/m — measured at 2.4 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	141.4 lm/W	339.5 lm/m	E	119.2 lm/W	286.2 lm/m	E	—	—	—
2300 K	154.2 lm/W	370 lm/m	D	133 lm/W	319.2 lm/m	E	107.5 lm/W	258 lm/m	F
2700 K	166.2 lm/W	398.9 lm/m	D	144 lm/W	345.6 lm/m	E	116.7 lm/W	280 lm/m	F
3000 K	174.6 lm/W	419 lm/m	C	151.9 lm/W	364.7 lm/m	D	123.6 lm/W	296.7 lm/m	E
3500 K	177.2 lm/W	425.3 lm/m	C	155.2 lm/W	372.5 lm/m	D	127.8 lm/W	306.7 lm/m	E
4000 K	180.5 lm/W	433.1 lm/m	C	156.1 lm/W	374.7 lm/m	D	128.8 lm/W	309.1 lm/m	E
5000 K	180.3 lm/W	432.7 lm/m	C	157.1 lm/W	377.1 lm/m	D	130.1 lm/W	312.3 lm/m	E
6500 K	172.8 lm/W	414.8 lm/m	C	150.1 lm/W	360.3 lm/m	D	124.6 lm/W	299.1 lm/m	E

Grade DN (1st Tier) · 3.6W/m

Grade DN (1st Tier) · 3.6W/m — measured at 3.6 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	140.3 lm/W	504.9 lm/m	E	118.2 lm/W	425.6 lm/m	F	—	—	—
2300 K	152.9 lm/W	550.4 lm/m	D	131.9 lm/W	474.7 lm/m	E	106.6 lm/W	383.8 lm/m	F
2700 K	164.8 lm/W	593.3 lm/m	D	142.8 lm/W	514 lm/m	E	115.7 lm/W	416.5 lm/m	F
3000 K	173.1 lm/W	623.2 lm/m	C	150.7 lm/W	542.4 lm/m	D	122.6 lm/W	441.3 lm/m	E
3500 K	175.7 lm/W	632.6 lm/m	C	153.9 lm/W	554 lm/m	D	126.7 lm/W	456.2 lm/m	E
4000 K	179 lm/W	644.3 lm/m	C	154.8 lm/W	557.3 lm/m	D	127.7 lm/W	459.8 lm/m	E
5000 K	178.8 lm/W	643.5 lm/m	C	155.8 lm/W	561 lm/m	D	129 lm/W	464.6 lm/m	E
6500 K	171.4 lm/W	617 lm/m	D	148.8 lm/W	535.9 lm/m	D	123.6 lm/W	444.9 lm/m	E

Grade DN (1st Tier) · 4.8W/m

Grade DN (1st Tier) · 4.8W/m — measured at 4.8 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	139.1 lm/W	667.6 lm/m	E	117.2 lm/W	562.7 lm/m	F	—	—	—
2300 K	151.6 lm/W	727.7 lm/m	D	130.8 lm/W	627.7 lm/m	E	105.7 lm/W	507.4 lm/m	F
2700 K	163.4 lm/W	784.5 lm/m	D	141.6 lm/W	679.6 lm/m	E	114.7 lm/W	550.7 lm/m	F
3000 K	171.6 lm/W	823.9 lm/m	D	149.4 lm/W	717.1 lm/m	D	121.5 lm/W	583.4 lm/m	E
3500 K	174.3 lm/W	836.4 lm/m	C	152.6 lm/W	732.5 lm/m	D	125.7 lm/W	603.1 lm/m	E
4000 K	177.5 lm/W	851.8 lm/m	C	153.5 lm/W	736.8 lm/m	D	126.7 lm/W	607.9 lm/m	E
5000 K	177.3 lm/W	850.8 lm/m	C	154.5 lm/W	741.7 lm/m	D	128 lm/W	614.2 lm/m	E
6500 K	169.9 lm/W	815.7 lm/m	D	147.6 lm/W	708.5 lm/m	D	122.5 lm/W	588.2 lm/m	E

Grade KE (3rd Tier) · 2.4W/m

Grade KE (3rd Tier) · 2.4W/m — measured at 2.4 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	110.7 lm/W	265.6 lm/m	E	88.7 lm/W	212.8 lm/m	F	—	—	—
2300 K	123.4 lm/W	296.2 lm/m	E	98.7 lm/W	237 lm/m	F	79.8 lm/W	191.5 lm/m	G
2700 K	133 lm/W	319.2 lm/m	E	107.2 lm/W	257.3 lm/m	F	86.8 lm/W	208.4 lm/m	F
3000 K	139.7 lm/W	335.3 lm/m	D	113.2 lm/W	271.7 lm/m	E	92.1 lm/W	221.1 lm/m	F
3500 K	141.8 lm/W	340.2 lm/m	D	115.5 lm/W	277.1 lm/m	E	95 lm/W	227.9 lm/m	F
4000 K	145.9 lm/W	350.2 lm/m	D	117.9 lm/W	283 lm/m	E	97.3 lm/W	233.6 lm/m	F
5000 K	145.7 lm/W	349.7 lm/m	D	117.9 lm/W	283 lm/m	E	97.6 lm/W	234.3 lm/m	F
6500 K	139.7 lm/W	335.3 lm/m	D	113.2 lm/W	271.7 lm/m	E	94 lm/W	225.5 lm/m	F

Grade KE (3rd Tier) · 3.6W/m

Grade KE (3rd Tier) · 3.6W/m — measured at 3.6 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	109.7 lm/W	395.1 lm/m	F	87.9 lm/W	316.5 lm/m	F	—	—	—
2300 K	122.4 lm/W	440.5 lm/m	E	97.9 lm/W	352.5 lm/m	F	79.1 lm/W	284.8 lm/m	G
2700 K	131.9 lm/W	474.7 lm/m	E	106.3 lm/W	382.7 lm/m	F	86.1 lm/W	309.9 lm/m	F
3000 K	138.5 lm/W	498.7 lm/m	D	112.3 lm/W	404.2 lm/m	E	91.3 lm/W	328.9 lm/m	F
3500 K	140.6 lm/W	506 lm/m	D	114.5 lm/W	412.2 lm/m	E	94.2 lm/W	339 lm/m	F
4000 K	144.7 lm/W	520.9 lm/m	D	116.9 lm/W	420.9 lm/m	E	96.5 lm/W	347.4 lm/m	F
5000 K	144.5 lm/W	520.2 lm/m	D	116.9 lm/W	420.9 lm/m	E	96.8 lm/W	348.5 lm/m	F
6500 K	138.5 lm/W	498.7 lm/m	D	112.3 lm/W	404.2 lm/m	E	93.2 lm/W	335.4 lm/m	F

Grade KE (3rd Tier) · 4.8W/m

Grade KE (3rd Tier) · 4.8W/m — measured at 4.8 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	108.8 lm/W	522.3 lm/m	F	87.2 lm/W	418.4 lm/m	F	—	—	—
2300 K	121.3 lm/W	582.5 lm/m	E	97.1 lm/W	466.1 lm/m	F	78.5 lm/W	376.6 lm/m	G
2700 K	130.8 lm/W	627.7 lm/m	E	105.4 lm/W	506 lm/m	F	85.4 lm/W	409.8 lm/m	F
3000 K	137.4 lm/W	659.4 lm/m	D	111.3 lm/W	534.4 lm/m	E	90.6 lm/W	434.8 lm/m	F
3500 K	139.4 lm/W	669 lm/m	D	113.5 lm/W	544.9 lm/m	E	93.4 lm/W	448.3 lm/m	F
4000 K	143.5 lm/W	688.8 lm/m	D	115.9 lm/W	556.5 lm/m	E	95.7 lm/W	459.3 lm/m	F
5000 K	143.3 lm/W	687.8 lm/m	D	115.9 lm/W	556.5 lm/m	E	96 lm/W	460.8 lm/m	F
6500 K	137.4 lm/W	659.4 lm/m	D	111.3 lm/W	534.4 lm/m	E	92.4 lm/W	443.5 lm/m	F

Recommended LED Channels

Mount this LED strip in a DENO LED aluminum profile for heat dissipation, physical protection and diffused, dot-free output.

This strip is 8mm wide, so it needs a channel with at least 10mm inner width (8mm + 2mm clearance). Every profile below meets that.

Modelos relacionados nesta série

See every model in SMD LED Strip Series or narrow to High Efficiency. Compare wattage, lumen output and run length in the ProCalc parameter library, or request OEM/ODM pricing on the custom manufacturing page.

Perguntas Frequentes

Quais são as principais especificações do 11076?

11076: 2835, 70 LEDs/m, 24V, PCB de 8, FPCB com cobre de 3oz, corte a cada 7LEDs/100mm. Dados fotométricos completos, diagramas de ligação e relatórios de ensaio estão disponíveis na seção de downloads desta página.

Qual pode ser o comprimento de um único trecho desta Fita de LED SMD de 24V?

O comprimento máximo de um único trecho deste modelo é 5m. A alimentação pelas duas extremidades ou por um ponto central reduz pela metade a distância efetiva por segmento, permitindo que uma Fita de LED SMD de 24V cubra o dobro desse comprimento em um circuito quando conectada dessa forma.

A DENO pode personalizar esta Fita de LED SMD de 24V para um projeto?

Sim. A DENO fabrica a série de Fitas de LED SMD Clássicas como fornecedora OEM e ODM: comprimento do rolo, temperatura de cor, classe de IRC (CRI), largura do PCB, impermeabilização e marca própria podem ser especificados. Solicite um Orçamento para consultar o prazo de entrega e os preços do projeto.

Qual densidade de Fita de LED SMD você deve especificar?

Para iluminação geral de sancas e prateleiras, 120 LEDs/m em uma Fita de LED de 24V é a referência usual. Opte por 180 ou 240 LEDs/m quando a fita estiver próxima de um difusor ou for vista em um ângulo rasante, pois a maior densidade é o que elimina os pontos visíveis em uma Fita de LED 2835.

Qual Driver / Fonte de Alimentação para LED e qual comprimento de trecho são adequados para #11076?

8mm | 24V | 70LEDs | 100mm/corte | #11076 | Fita de LED 2835 de Alta Eficácia Luminosa é um produto de tensão constante de 24V; portanto, combine-o com um Driver / Fonte de Alimentação para LED de tensão constante de 24V com certificação CE ou UL e potência nominal cerca de 20% acima da carga conectada. O comprimento máximo de um único trecho é 5m. Alimentação por uma extremidade: 5m / por duas extremidades: 10m. Alimentar pelas duas extremidades ou pelo ponto central reduz pela metade a distância percorrida no cobre e reduz a queda de tensão para aproximadamente um quarto.

Engineering & selection guide

Bending limits, IP selection, voltage drop, cutting and the full buyer Q&A for this family are kept on the series page.

High Efficiency LED Strips series — High Efficiency LED Strip — Buyer Questions
LED strip engineering selection handbook