How narrow can a 3mm LED strip be?

DENO's ultra-narrow boards start at 3 mm PCB width, with 4 mm, 5 mm, 6 mm and 8 mm as standard steps. A 3 mm strip fits inside slim aluminium reveals, glass-edge details and joinery grooves that will not accept the usual 8–10 mm tape.

Is a narrow LED strip less bright?

Not necessarily, but it has less copper for heat spreading, so output per metre is limited by thermal design rather than by the LEDs. DENO specifies 2 oz copper on 3–5 mm boards and recommends an aluminium profile; typical usable output is 6–14 W/m depending on width and density.

Can a 3mm LED strip still be high density?

Yes. Micro packages such as 1808, 2110 and 2216 allow 240–480 LEDs/m on a 3–5 mm board, so a narrow reveal can still be dot-free behind a shallow diffuser. Above that density the width usually has to grow to 8 mm for thermal reasons.

How tightly does a narrow LED strip bend?

A 3–5 mm board bends to a much tighter radius than standard tape and can be curved along its length without stressing the copper. For horizontal curves and corners, an S-bend layout removes the need to cut and solder at each turn.

What is the cut unit on an ultra-narrow LED strip?

Cut intervals typically run from 12.5 mm to 50 mm depending on voltage and density, and micro-cut versions shorten this further for exact millwork lengths. Ask for the cut unit in the quote — it decides how closely the finished run matches the drawing.

Can I order a custom width LED strip?

Yes — PCB width from 3 mm, LED density, CCT and CRI, copper weight, cut unit, IP class and connector are all configurable. DENO is a manufacturer, so a non-standard width is tooled from an existing FPCB stack-up instead of being ruled out.

Fita de LED Ultraestreita 2835 (#9496)

5mm · 12V · 120LEDs · 25cut

Model: 9496

9496 5mm | 12V | 120LEDs | 25cut | #9496 | Fita de LED Ultraestreita 2835 — 12V, cuttable every 25mm, 5mm FPCB width, 2835 LEDs, 120 LEDs/m, IP20

Visão Geral

5mm | 12V | 120LEDs | corte de 25 | #9496 | Fita de LED Ultraestreita 2835 faz parte da série de Fitas SMD Ultraestreitas da DENO, desenvolvida para aplicações com Fita de LED ultraestreita. Especificações principais: 2835, 120 LEDs/m, 12V, PCB de 5mm, FPCB com cobre de 3oz, corte a cada 3LEDs/25mm. Cada rolo é produzido na linha rolo a rolo da DENO com FPCB de cobre de pureza 99.9% e é fornecido em conformidade com CE, UL e RoHS para projetos de arquitetura, varejo e hotelaria. Configurações OEM e ODM de comprimento, temperatura de cor e impermeabilização estão disponíveis mediante solicitação.

Descrição

Esta Fita de LED 2835 ultraestreita de 5mm foi projetada especificamente para integração harmoniosa em Perfis de Alumínio estreitos e iluminação de frestas arquiteturais reduzidas. Com 120 LEDs por metro e espaçamento de 8.3mm, o circuito de tensão constante de 12V permite cortes precisos em intervalos de 25mm. Construída com folha de cobre reforçada de 3oz, a PCB mantém estabilidade térmica superior em temperaturas de operação de -25°C a 40°C. A capacidade de dimerização completa e o amplo ângulo de abertura de 120 graus tornam este modelo ideal para fornecimento de projetos no atacado e instalações de iluminação de armários. Com diâmetro mínimo de curvatura de 60mm e comprimento contínuo de 5M, nossa fábrica oferece fabricação OEM confiável para luminárias compactas especializadas.

Ultra Narrow Led Strip built for ultra-narrow smd strips projects.

Especificações

LED QTY	120 LEDs/m
PART NO	DL-F28A60V12-9496-*
SMD TYPE	2835
CUTTABLE UNIT	3LEDs/25mm
DIMMABLE	Yes
IP RATING	IP20
LED PITCH	8.3mm
PCB WIDTH	5mm
BEAM ANGLE	120°
RUN LENGTH	5M
COPPER FOIL	3oz
ON OFF TIMES	10000（test times）
POWER RANGE	2.4~14.4W
CIRCUIT TYPE	C.V.
INPUT VOLTAGE	12V
MIN BEND DIAMETER	Φ60mm
OPERATING TEMPERATURE	-25~40°C;Tc：75°C（max）

Aplicações

Cove, wall-wash & perimeter lighting — Coves, recesses, wall-wash details and ceiling perimeters where a continuous, uniform line of light is required.
Showroom & hospitality display lighting — Shelving, display cases, reception desks and signage backlighting in shops, showrooms and hospitality spaces.
Kitchen & wardrobe under-cabinet lighting — Kitchen, wardrobe and furniture task lighting where the strip stays hidden and only the light is seen.
Ultra-narrow 5mm channels & shadow gaps — Fits shadow-gap details, slim profiles and joinery grooves that cannot take a standard 8–10mm strip.

Acessórios recomendados e peças compatíveis

DL-0809HX-F — 8.89x7.79mm Mini Recessed LED Channel with Flange — Trimless Aluminum Profile for 5mm Strip: Accepts LED strips up to 5mm wide.
DL-0909HX-M — 9x9mm Magnetic LED Channel — Tool-Free Aluminum Profile for Shelf Lighting: Accepts LED strips up to 5mm wide.
DL-1010HX-V — 10x10mm V Shape Corner LED Channel — 45 Degree Aluminum Profile for Cabinets: Accepts LED strips up to 5mm wide.
V1 — 5-36VDC 1-Channel * 8A RF+Push Dimming Controller | V1: Matched by input voltage range and colour channels.

Solicite um orçamento para #9496

A DENO LED é uma fabricante de fitas de LED com sede em Shenzhen e base de produção própria em Foshan. Envie-nos o comprimento do trecho, tensão, CCT/IRC e grau de proteção IP que você precisa e nossa equipe de engenharia responderá com uma ficha técnica, diagrama de fiação e preço — OEM/ODM e projetos totalmente personalizados incluídos.

WhatsApp para nossa engenharia Formulário de contato Capacidade OEM / ODM

Garantia: 5 anos
Prazo de entrega: Placas padrão: amostras a partir de 1 dia útil · personalizadas: 3–5 dias úteis · nova FPCB: 1–3 semanas · produção 1–2 semanas após aprovação da amostra
Conformidade: CE · ETL · UL · RoHS
Fio de ligação: Ouro puro 99,99%
Folha de cobre: FPCB de cobre puro 99,9%
Serviços: CCT, IRC, largura de PCB, unidade de corte e embalagem personalizadas — amostras e produção em massa de uma única fábrica.

Desempenho Fotométrico — Matriz de Eficácia CCT × IRC (CRI)

Peak measured luminous efficacy: 165.5 lm/W at 4000K, Ra 80, ErP energy class D (Grade DN (1st Tier)).

All values are measured at the stated power density and ambient 25 °C, reported as luminous efficacy in lumens per watt (lm/W), luminous flux per metre (lm/m) and the corresponding EU ErP (2019/2015) energy class.

Grade DL (2nd Tier)

Grade DL (2nd Tier) — measured at 4.8 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	118 lm/W	566.5 lm/m	E	94.4 lm/W	453.3 lm/m	F	—	—	—
2300 K	131.4 lm/W	630.9 lm/m	E	105.3 lm/W	505.3 lm/m	F	85.3 lm/W	409.4 lm/m	F
2700 K	138.4 lm/W	664.3 lm/m	D	113.8 lm/W	546.5 lm/m	E	92.3 lm/W	443 lm/m	F
3000 K	147.9 lm/W	710.1 lm/m	D	119.9 lm/W	575.3 lm/m	E	97.4 lm/W	467.7 lm/m	F
3500 K	150.2 lm/W	720.9 lm/m	D	122 lm/W	585.6 lm/m	E	100.4 lm/W	482.2 lm/m	F
4000 K	154.9 lm/W	743.6 lm/m	D	124.9 lm/W	599.5 lm/m	E	103.1 lm/W	495 lm/m	F
5000 K	154.8 lm/W	743 lm/m	D	124.9 lm/W	599.5 lm/m	E	103 lm/W	494.4 lm/m	F
6500 K	141.6 lm/W	679.7 lm/m	D	119.7 lm/W	574.8 lm/m	E	99.4 lm/W	477.1 lm/m	F

Grade DL (2nd Tier)

Grade DL (2nd Tier) — measured at 9.6 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	114.1 lm/W	1095.5 lm/m	E	91.3 lm/W	876.6 lm/m	F	—	—	—
2300 K	127.1 lm/W	1219.9 lm/m	E	101.8 lm/W	977.1 lm/m	F	82.4 lm/W	791 lm/m	G
2700 K	133.8 lm/W	1284.6 lm/m	E	110.1 lm/W	1056.7 lm/m	E	89.2 lm/W	856.7 lm/m	F
3000 K	143 lm/W	1373.1 lm/m	D	115.9 lm/W	1112.4 lm/m	E	94.2 lm/W	904.5 lm/m	F
3500 K	145.2 lm/W	1394 lm/m	D	118 lm/W	1132.3 lm/m	E	97.1 lm/W	932.3 lm/m	F
4000 K	149.8 lm/W	1437.8 lm/m	D	120.7 lm/W	1159.2 lm/m	E	99.7 lm/W	957.2 lm/m	F
5000 K	149.7 lm/W	1436.8 lm/m	D	120.7 lm/W	1159.2 lm/m	E	99.6 lm/W	956.2 lm/m	F
6500 K	136.9 lm/W	1314.4 lm/m	D	115.8 lm/W	1111.4 lm/m	E	96.1 lm/W	922.6 lm/m	F

Grade DL (2nd Tier)

Grade DL (2nd Tier) — measured at 14.4 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	110.3 lm/W	1588.8 lm/m	E	88.3 lm/W	1271.3 lm/m	F	—	—	—
2300 K	122.9 lm/W	1769.2 lm/m	E	98.4 lm/W	1417.1 lm/m	F	79.7 lm/W	1147.7 lm/m	G
2700 K	129.4 lm/W	1863 lm/m	E	106.4 lm/W	1532.5 lm/m	F	86.3 lm/W	1242.5 lm/m	F
3000 K	138.3 lm/W	1991.4 lm/m	D	112 lm/W	1613.3 lm/m	E	91.1 lm/W	1311.7 lm/m	F
3500 K	140.4 lm/W	2021.7 lm/m	D	114 lm/W	1642.2 lm/m	E	93.9 lm/W	1352.1 lm/m	F
4000 K	144.8 lm/W	2085.2 lm/m	D	116.7 lm/W	1681.1 lm/m	E	96.4 lm/W	1388.2 lm/m	F
5000 K	144.7 lm/W	2083.7 lm/m	D	116.7 lm/W	1681.1 lm/m	E	96.3 lm/W	1386.7 lm/m	F
6500 K	132.4 lm/W	1906.3 lm/m	E	111.9 lm/W	1611.9 lm/m	E	92.9 lm/W	1337.8 lm/m	F

Grade DN (1st Tier)

Grade DN (1st Tier) — measured at 4.8 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	129.7 lm/W	622.6 lm/m	E	109.1 lm/W	523.8 lm/m	F	—	—	—
2300 K	141.4 lm/W	678.7 lm/m	E	121.8 lm/W	584.6 lm/m	E	98.6 lm/W	473.3 lm/m	F
2700 K	152.4 lm/W	731.7 lm/m	D	131.8 lm/W	632.4 lm/m	E	106.8 lm/W	512.5 lm/m	F
3000 K	160.1 lm/W	768.3 lm/m	D	139.1 lm/W	667.9 lm/m	E	113.2 lm/W	543.4 lm/m	F
3500 K	162.4 lm/W	779.6 lm/m	D	142.1 lm/W	682.3 lm/m	E	117.1 lm/W	561.9 lm/m	F
4000 K	165.5 lm/W	794.5 lm/m	D	143 lm/W	686.4 lm/m	E	118 lm/W	566.5 lm/m	F
5000 K	165.3 lm/W	793.5 lm/m	D	143.9 lm/W	690.6 lm/m	E	118.7 lm/W	569.8 lm/m	F
6500 K	158.4 lm/W	760.5 lm/m	D	137.5 lm/W	660.2 lm/m	E	114.2 lm/W	548.2 lm/m	F

Grade DN (1st Tier)

Grade DN (1st Tier) — measured at 9.6 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	125.4 lm/W	1204 lm/m	E	105.5 lm/W	1012.9 lm/m	F	—	—	—
2300 K	136.7 lm/W	1312.4 lm/m	E	117.7 lm/W	1130.3 lm/m	F	95.4 lm/W	915.8 lm/m	F
2700 K	147.4 lm/W	1414.9 lm/m	D	127.4 lm/W	1222.9 lm/m	E	103.2 lm/W	991 lm/m	F
3000 K	154.7 lm/W	1485.6 lm/m	D	134.5 lm/W	1291.5 lm/m	E	109.5 lm/W	1050.7 lm/m	F
3500 K	157 lm/W	1507.4 lm/m	D	137.4 lm/W	1319.4 lm/m	E	113.2 lm/W	1086.6 lm/m	F
4000 K	160 lm/W	1536.3 lm/m	D	138.3 lm/W	1327.4 lm/m	E	114.1 lm/W	1095.5 lm/m	F
5000 K	159.8 lm/W	1534.3 lm/m	D	139.1 lm/W	1335.3 lm/m	E	114.8 lm/W	1102.1 lm/m	F
6500 K	153.2 lm/W	1470.6 lm/m	D	133 lm/W	1276.6 lm/m	E	110.4 lm/W	1059.8 lm/m	F

Grade DN (1st Tier)

Grade DN (1st Tier) — measured at 14.4 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	121.3 lm/W	1746.1 lm/m	E	102 lm/W	1469 lm/m	F	—	—	—
2300 K	132.2 lm/W	1903.4 lm/m	E	113.8 lm/W	1639.3 lm/m	F	92.2 lm/W	1327.7 lm/m	F
2700 K	142.5 lm/W	2052 lm/m	E	123.2 lm/W	1773.5 lm/m	E	99.8 lm/W	1437.3 lm/m	F
3000 K	149.6 lm/W	2154.5 lm/m	D	130.1 lm/W	1873.1 lm/m	E	105.8 lm/W	1523.8 lm/m	F
3500 K	151.8 lm/W	2186.2 lm/m	D	132.9 lm/W	1913.5 lm/m	E	109.4 lm/W	1575.8 lm/m	F
4000 K	154.7 lm/W	2228.1 lm/m	D	133.7 lm/W	1925 lm/m	E	110.3 lm/W	1588.8 lm/m	F
5000 K	154.5 lm/W	2225.2 lm/m	D	134.5 lm/W	1936.6 lm/m	E	110.9 lm/W	1597 lm/m	F
6500 K	148.1 lm/W	2132.8 lm/m	D	128.6 lm/W	1851.4 lm/m	E	106.7 lm/W	1536.5 lm/m	F

Grade KE (3rd Tier)

Grade KE (3rd Tier) — measured at 4.8 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	96.5 lm/W	463.1 lm/m	F	77 lm/W	369.5 lm/m	G	—	—	—
2300 K	107.5 lm/W	516.1 lm/m	F	85.8 lm/W	411.7 lm/m	F	69.5 lm/W	333.6 lm/m	G
2700 K	115.9 lm/W	556.2 lm/m	E	93.1 lm/W	446.6 lm/m	F	75.5 lm/W	362.3 lm/m	G
3000 K	121.7 lm/W	584 lm/m	E	98.4 lm/W	472.4 lm/m	F	80.1 lm/W	384.4 lm/m	G
3500 K	123.5 lm/W	592.8 lm/m	E	100.3 lm/W	481.6 lm/m	F	82.5 lm/W	396.2 lm/m	G
4000 K	127.1 lm/W	610.3 lm/m	E	102.5 lm/W	491.9 lm/m	F	84.6 lm/W	406 lm/m	G
5000 K	126.9 lm/W	609.2 lm/m	E	102.5 lm/W	491.9 lm/m	F	84.6 lm/W	406.1 lm/m	G
6500 K	121.7 lm/W	584 lm/m	E	98.4 lm/W	472.4 lm/m	F	81.7 lm/W	392.2 lm/m	G

Grade KE (3rd Tier)

Grade KE (3rd Tier) — measured at 9.6 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	93.3 lm/W	895.5 lm/m	F	74.4 lm/W	714.4 lm/m	G	—	—	—
2300 K	104 lm/W	998 lm/m	F	82.9 lm/W	796 lm/m	G	67.2 lm/W	645.1 lm/m	G
2700 K	112 lm/W	1075.6 lm/m	E	90 lm/W	863.7 lm/m	F	73 lm/W	700.5 lm/m	G
3000 K	117.6 lm/W	1129.3 lm/m	E	95.1 lm/W	913.4 lm/m	F	77.4 lm/W	743.3 lm/m	G
3500 K	119.4 lm/W	1146.3 lm/m	E	97 lm/W	931.3 lm/m	F	79.8 lm/W	766.2 lm/m	G
4000 K	122.9 lm/W	1180.1 lm/m	E	99.1 lm/W	951.2 lm/m	F	81.8 lm/W	785.1 lm/m	G
5000 K	122.7 lm/W	1178.1 lm/m	E	99.1 lm/W	951.2 lm/m	F	81.7 lm/W	784.3 lm/m	G
6500 K	117.6 lm/W	1129.3 lm/m	E	95.1 lm/W	913.4 lm/m	F	79 lm/W	758.4 lm/m	G

Grade KE (3rd Tier)

Grade KE (3rd Tier) — measured at 14.4 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	90.2 lm/W	1298.7 lm/m	F	72 lm/W	1036.1 lm/m	G	—	—	—
2300 K	100.5 lm/W	1447.4 lm/m	F	80.2 lm/W	1154.4 lm/m	G	64.9 lm/W	934.6 lm/m	G
2700 K	108.3 lm/W	1559.9 lm/m	F	87 lm/W	1252.6 lm/m	F	70.5 lm/W	1015.9 lm/m	G
3000 K	113.7 lm/W	1637.8 lm/m	E	92 lm/W	1324.7 lm/m	F	74.9 lm/W	1077.9 lm/m	G
3500 K	115.4 lm/W	1662.4 lm/m	E	93.8 lm/W	1350.7 lm/m	F	77.2 lm/W	1111.1 lm/m	G
4000 K	118.9 lm/W	1711.4 lm/m	E	95.8 lm/W	1379.5 lm/m	F	79.1 lm/W	1138.6 lm/m	G
5000 K	118.6 lm/W	1708.6 lm/m	E	95.8 lm/W	1379.5 lm/m	F	79 lm/W	1137.6 lm/m	G
6500 K	113.7 lm/W	1637.8 lm/m	E	92 lm/W	1324.7 lm/m	F	76.4 lm/W	1100.2 lm/m	G

High-Power LED Strip: Heat Dissipation & Aluminum Channel Guide

At up to 14.4W/m, 9496 is a high-power SMD LED strip. Above roughly 14.4W/m the tape can no longer shed its own heat through the FPC alone — an aluminum channel is part of the luminaire, not an accessory.

Why high-wattage strips need a heat sink

Aluminum conducts heat roughly 30× faster than the plastics, MDF or gypsum a strip is usually stuck to, so a bare high-power run traps heat under the tape.
LED lifetime (LM-80 / TM-21) is driven by solder-point temperature Tc. Keeping Tc inside the datasheet limit — DENO strips are rated Tc ≤ 75°C — is what preserves the rated L70 lifetime and colour stability.
Never run 14.4W/m or more coiled on the reel, inside a sealed plastic diffuser, or directly on wood, wallpaper or foam.

Sizing rule: FPC width vs channel inner width

Channel inner width ≥ FPC width + 2mm. This strip is 5mm wide, so it needs at least 7mm of inner width.
The 2mm clearance absorbs extrusion tolerance and lets the tape be seated or replaced without scraping the side walls or the wiring.
A frosted or opal PC cover then diffuses the higher lumen output into an even, dot-free line instead of visible hot spots.

Aluminum channels that fit this strip

Recommended LED Channels

Mount this LED strip in a DENO LED aluminum profile for heat dissipation, physical protection and diffused, dot-free output.

This strip is 5mm wide, so it needs a channel with at least 7mm inner width (5mm + 2mm clearance). Every profile below meets that.

Modelos relacionados nesta série

See every model in SMD LED Strip Series or narrow to Ultra Narrow. Compare wattage, lumen output and run length in the ProCalc parameter library, or request OEM/ODM pricing on the custom manufacturing page.

Perguntas Frequentes

Quais são as principais especificações do 9496?

9496: 2835, 120 LEDs/m, 12V, PCB de 5mm, FPCB com cobre de 3oz, corte a cada 3LEDs/25mm. Dados fotométricos completos, diagramas de ligação e relatórios de ensaio estão disponíveis na seção de downloads desta página.

Qual pode ser o comprimento de um trecho único desta Fita de LED ultraestreita?

O comprimento máximo de um trecho único deste modelo é 5M. Alimentar pelas duas extremidades ou utilizar uma derivação no ponto intermediário reduz pela metade a distância efetiva por segmento; assim, uma Fita de LED ultraestreita pode cobrir o dobro desse comprimento em um único circuito quando cabeada dessa forma.

A DENO pode personalizar esta Fita de LED ultraestreita para um projeto?

Sim. A DENO fabrica a série de Fitas SMD Ultraestreitas como fornecedora OEM e ODM: comprimento do rolo, temperatura de cor, classe de IRC (CRI), largura da PCB, impermeabilização e identificação com marca própria podem ser especificados. Solicite um Orçamento para obter o prazo de entrega e os preços do projeto.

Qual é a menor largura possível de uma Fita de LED estreita?

A DENO fabrica FPCB com largura mínima de 3 mm. Uma Fita de LED de 3 mm cabe em canais de alumínio, rebaixos de armários, bordas de prateleiras e rasgos arquitetônicos estreitos onde uma placa de 8 ou 10 mm não pode ficar oculta, mantendo ainda cobre de 2 oz para trechos longos e estáveis.

Qual Driver / Fonte de Alimentação para LED e qual comprimento de trecho são adequados para #9496?

5mm | 12V | 120LEDs | 25cut | #9496 | A Fita de LED Ultraestreita 2835 é um produto de tensão constante de 12V, portanto, combine-a com um Driver / Fonte de Alimentação de LED de tensão constante de 12V com certificação CE ou UL e potência nominal cerca de 20% acima da carga conectada. O comprimento máximo de um trecho contínuo é 5M. Alimentação por uma extremidade: 5m / pelas duas extremidades: 10m. A alimentação pelas duas extremidades ou pelo ponto central reduz pela metade o percurso no cobre e a queda de tensão para aproximadamente um quarto.

Engineering & selection guide

Bending limits, IP selection, voltage drop, cutting and the full buyer Q&A for this family are kept on the series page.

ultra narrow LED strip series — Ultra Narrow LED Strip — Buyer Questions
LED strip engineering selection handbook