How narrow can a 3mm LED strip be?

DENO's ultra-narrow boards start at 3 mm PCB width, with 4 mm, 5 mm, 6 mm and 8 mm as standard steps. A 3 mm strip fits inside slim aluminium reveals, glass-edge details and joinery grooves that will not accept the usual 8–10 mm tape.

Is a narrow LED strip less bright?

Not necessarily, but it has less copper for heat spreading, so output per metre is limited by thermal design rather than by the LEDs. DENO specifies 2 oz copper on 3–5 mm boards and recommends an aluminium profile; typical usable output is 6–14 W/m depending on width and density.

Can a 3mm LED strip still be high density?

Yes. Micro packages such as 1808, 2110 and 2216 allow 240–480 LEDs/m on a 3–5 mm board, so a narrow reveal can still be dot-free behind a shallow diffuser. Above that density the width usually has to grow to 8 mm for thermal reasons.

How tightly does a narrow LED strip bend?

A 3–5 mm board bends to a much tighter radius than standard tape and can be curved along its length without stressing the copper. For horizontal curves and corners, an S-bend layout removes the need to cut and solder at each turn.

What is the cut unit on an ultra-narrow LED strip?

Cut intervals typically run from 12.5 mm to 50 mm depending on voltage and density, and micro-cut versions shorten this further for exact millwork lengths. Ask for the cut unit in the quote — it decides how closely the finished run matches the drawing.

Can I order a custom width LED strip?

Yes — PCB width from 3 mm, LED density, CCT and CRI, copper weight, cut unit, IP class and connector are all configurable. DENO is a manufacturer, so a non-standard width is tooled from an existing FPCB stack-up instead of being ruled out.

Fita de LED 2835 Ultraestreita de Alta Eficácia Luminosa (#5267)

5mm · 24V · 128LEDs · 62.5cut

Model: 5267

5267 5mm | 24V | 128LEDs | 62.5cut | #5267 | Fita de LED 2835 Ultraestreita de Alta Eficácia Luminosa — 24V, cuttable every 62.5mm, 5mm FPCB width, 2835 LEDs, 128 LEDs/m, IP20

Visão Geral

5mm | 24V | 128LEDs | 62.5corte | #5267 | Fita de LED ultraestreita 2835 de alta eficácia luminosa faz parte da série de Fitas SMD Ultraestreitas da DENO, desenvolvida com foco em Fita de LED ultraestreita. Principais especificações: 2835, 128 LEDs/m, 24V, PCB de 5mm, FPCB com cobre de 3 oz, corte a cada 8LEDs/62.5mm. Cada rolo é produzido na linha rolo a rolo da DENO com FPCB de cobre com pureza de 99.9% e é fornecido em conformidade com CE, UL e RoHS para projetos arquitetônicos, de varejo e de hotelaria. Configurações OEM e ODM de comprimento, temperatura de cor e impermeabilização estão disponíveis mediante solicitação.

Descrição

Esta Fita de LED 2835 com PCB ultraestreita de 5mm se encaixa em canais de instalação estreitos, tornando-a ideal para iluminação de precisão em armários. Projetado com 128 LEDs por metro e espaçamento de 7.8mm, o circuito proporciona iluminação uniforme em um ângulo de abertura de 120 graus. Operando com tensão constante de 24V, a fita pode ser cortada a cada 62.5mm e oferece funcionalidade de dimerização para atender aos requisitos do projeto. Fabricada com folha espessa de cobre de 3 oz e estruturas de cobre puro com encapsulamento com fio de ouro para garantir gerenciamento térmico confiável. Fornecida em trechos contínuos de no máximo 5 metros, oferecemos produção direta da fábrica e personalização OEM para distribuidores atacadistas.

High Efficacy Led Strip Lights built for high light efficacy smd strips projects.

Especificações

LED QTY	128 LEDs/m
PART NO	DL-F28A64V24-5267-*
SMD TYPE	2835
CUTTABLE UNIT	8LEDs/62.5mm
DIMMABLE	Yes
IP RATING	IP20
LED PITCH	7.8mm
PCB WIDTH	5mm
BEAM ANGLE	120°
RUN LENGTH	5m
COPPER FOIL	3 oz
ON OFF TIMES	10000（test times）
POWER RANGE	2~14.4W
CIRCUIT TYPE	C.V.
INPUT VOLTAGE	24V
MIN BEND DIAMETER	Φ60mm
OPERATING TEMPERATURE	-25~40°C;Tc: 75°C (max)

Aplicações

Cove, wall-wash & perimeter lighting — Coves, recesses, wall-wash details and ceiling perimeters where a continuous, uniform line of light is required.
Showroom & hospitality display lighting — Shelving, display cases, reception desks and signage backlighting in shops, showrooms and hospitality spaces.
Kitchen & wardrobe under-cabinet lighting — Kitchen, wardrobe and furniture task lighting where the strip stays hidden and only the light is seen.
Ultra-narrow 5mm channels & shadow gaps — Fits shadow-gap details, slim profiles and joinery grooves that cannot take a standard 8–10mm strip.

Acessórios recomendados e peças compatíveis

DL-0809HX-F — 8.89x7.79mm Mini Recessed LED Channel with Flange — Trimless Aluminum Profile for 5mm Strip: Accepts LED strips up to 5mm wide.
DL-0909HX-M — 9x9mm Magnetic LED Channel — Tool-Free Aluminum Profile for Shelf Lighting: Accepts LED strips up to 5mm wide.
DL-1010HX-V — 10x10mm V Shape Corner LED Channel — 45 Degree Aluminum Profile for Cabinets: Accepts LED strips up to 5mm wide.
DN-PSU-100 — 24V 100W Class-2 LED Driver · High Efficiency: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
DN-PSU-150 — 24V 150W Class-2 LED Driver · Premium: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
DN-PSU-60 — 24V 60W Class-2 LED Driver · Constant Voltage: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
V1 — 5-36VDC 1-Channel * 8A RF+Push Dimming Controller | V1: Matched by input voltage range and colour channels.

Solicite um orçamento para #5267

A DENO LED é uma fabricante de fitas de LED com sede em Shenzhen e base de produção própria em Foshan. Envie-nos o comprimento do trecho, tensão, CCT/IRC e grau de proteção IP que você precisa e nossa equipe de engenharia responderá com uma ficha técnica, diagrama de fiação e preço — OEM/ODM e projetos totalmente personalizados incluídos.

WhatsApp para nossa engenharia Formulário de contato Capacidade OEM / ODM

Garantia: 5 anos
Prazo de entrega: Placas padrão: amostras a partir de 1 dia útil · personalizadas: 3–5 dias úteis · nova FPCB: 1–3 semanas · produção 1–2 semanas após aprovação da amostra
Conformidade: CE · ETL · UL · RoHS
Fio de ligação: Ouro puro 99,99%
Folha de cobre: FPCB de cobre puro 99,9%
Serviços: CCT, IRC, largura de PCB, unidade de corte e embalagem personalizadas — amostras e produção em massa de uma única fábrica.

Desempenho Fotométrico — Matriz de Eficácia CCT × IRC (CRI)

Peak measured luminous efficacy: 220.9 lm/W at 4000K, Ra 80, ErP energy class B (Grade DN (1st Tier) · 5.8W/m).

All values are measured at the stated power density and ambient 25 °C, reported as luminous efficacy in lumens per watt (lm/W), luminous flux per metre (lm/m) and the corresponding EU ErP (2019/2015) energy class.

Grade DL (2nd Tier) · 5.8W/m

Grade DL (2nd Tier) · 5.8W/m — measured at 5.8 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	164.5 lm/W	954.1 lm/m	C	132.2 lm/W	766.9 lm/m	E	—	—	—
2300 K	183.2 lm/W	1062.3 lm/m	C	147.3 lm/W	854.3 lm/m	D	119 lm/W	690.2 lm/m	E
2700 K	194.1 lm/W	1125.9 lm/m	B	159.4 lm/W	924.4 lm/m	D	129.1 lm/W	749 lm/m	E
3000 K	206.2 lm/W	1196.1 lm/m	B	167.7 lm/W	972.6 lm/m	C	136.4 lm/W	791.3 lm/m	D
3500 K	209.2 lm/W	1213.3 lm/m	B	170.7 lm/W	989.8 lm/m	C	140.5 lm/W	815 lm/m	D
4000 K	216 lm/W	1252.6 lm/m	A	174.8 lm/W	1013.6 lm/m	C	144.3 lm/W	837 lm/m	D
5000 K	215.7 lm/W	1250.8 lm/m	A	174.7 lm/W	1013 lm/m	C	144.6 lm/W	838.8 lm/m	D
6500 K	197.9 lm/W	1147.9 lm/m	B	167.6 lm/W	972 lm/m	C	139.1 lm/W	806.7 lm/m	D

Grade DL (2nd Tier) · 9.6W/m

Grade DL (2nd Tier) · 9.6W/m — measured at 9.6 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	160.2 lm/W	1537.7 lm/m	C	128.7 lm/W	1235.9 lm/m	E	—	—	—
2300 K	178.3 lm/W	1712 lm/m	C	143.4 lm/W	1376.7 lm/m	D	115.9 lm/W	1112.3 lm/m	E
2700 K	189 lm/W	1814.5 lm/m	B	155.2 lm/W	1489.8 lm/m	D	125.7 lm/W	1207.1 lm/m	E
3000 K	200.8 lm/W	1927.6 lm/m	B	163.3 lm/W	1567.4 lm/m	C	132.8 lm/W	1275.2 lm/m	E
3500 K	203.7 lm/W	1955.4 lm/m	B	166.2 lm/W	1595.1 lm/m	C	136.8 lm/W	1313.5 lm/m	D
4000 K	210.3 lm/W	2018.6 lm/m	A	170.2 lm/W	1633.5 lm/m	C	140.5 lm/W	1348.9 lm/m	D
5000 K	210 lm/W	2015.7 lm/m	B	170.1 lm/W	1632.5 lm/m	C	140.8 lm/W	1351.8 lm/m	D
6500 K	192.7 lm/W	1850 lm/m	B	163.2 lm/W	1566.4 lm/m	C	135.4 lm/W	1300.1 lm/m	D

Grade DL (2nd Tier) · 11.5W/m

Grade DL (2nd Tier) · 11.5W/m — measured at 11.5 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	158 lm/W	1817.6 lm/m	D	127 lm/W	1460.9 lm/m	E	—	—	—
2300 K	176 lm/W	2023.7 lm/m	C	141.5 lm/W	1627.3 lm/m	D	114.3 lm/W	1314.8 lm/m	E
2700 K	186.5 lm/W	2144.8 lm/m	B	153.1 lm/W	1761 lm/m	D	124.1 lm/W	1426.9 lm/m	E
3000 K	198.1 lm/W	2278.5 lm/m	B	161.1 lm/W	1852.7 lm/m	C	131.1 lm/W	1507.3 lm/m	E
3500 K	201 lm/W	2311.3 lm/m	B	164 lm/W	1885.5 lm/m	C	135 lm/W	1552.6 lm/m	D
4000 K	207.5 lm/W	2386.1 lm/m	B	167.9 lm/W	1930.8 lm/m	C	138.7 lm/W	1594.5 lm/m	D
5000 K	207.2 lm/W	2382.7 lm/m	B	167.8 lm/W	1929.7 lm/m	C	138.9 lm/W	1597.9 lm/m	D
6500 K	190.2 lm/W	2186.7 lm/m	B	161 lm/W	1851.5 lm/m	C	133.6 lm/W	1536.7 lm/m	E

Grade DN (1st Tier) · 5.8W/m

Grade DN (1st Tier) · 5.8W/m — measured at 5.8 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	173 lm/W	1003.5 lm/m	C	146.1 lm/W	847.1 lm/m	D	—	—	—
2300 K	188.7 lm/W	1094.4 lm/m	C	163 lm/W	945.2 lm/m	D	131.7 lm/W	763.9 lm/m	E
2700 K	203.4 lm/W	1179.4 lm/m	B	176.4 lm/W	1023.1 lm/m	C	143 lm/W	829.3 lm/m	E
3000 K	213.6 lm/W	1238.9 lm/m	B	186.1 lm/W	1079.6 lm/m	C	151.4 lm/W	878 lm/m	D
3500 K	216.8 lm/W	1257.3 lm/m	B	190.1 lm/W	1102.8 lm/m	C	156.5 lm/W	907.8 lm/m	D
4000 K	220.9 lm/W	1281.1 lm/m	B	191.3 lm/W	1109.3 lm/m	C	157.8 lm/W	915.5 lm/m	D
5000 K	220.5 lm/W	1278.7 lm/m	B	192.5 lm/W	1116.4 lm/m	C	159.4 lm/W	924.4 lm/m	D
6500 K	211.3 lm/W	1225.8 lm/m	B	184 lm/W	1067.1 lm/m	C	152.7 lm/W	885.8 lm/m	D

Grade DN (1st Tier) · 9.6W/m

Grade DN (1st Tier) · 9.6W/m — measured at 9.6 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	168.5 lm/W	1617.2 lm/m	D	142.2 lm/W	1365.2 lm/m	E	—	—	—
2300 K	183.7 lm/W	1763.8 lm/m	C	158.7 lm/W	1523.3 lm/m	D	128.2 lm/W	1231.1 lm/m	E
2700 K	198 lm/W	1900.8 lm/m	C	171.7 lm/W	1648.8 lm/m	D	139.2 lm/W	1336.5 lm/m	E
3000 K	208 lm/W	1996.6 lm/m	B	181.2 lm/W	1739.8 lm/m	C	147.4 lm/W	1415 lm/m	D
3500 K	211.1 lm/W	2026.3 lm/m	B	185.1 lm/W	1777.2 lm/m	C	152.4 lm/W	1462.9 lm/m	D
4000 K	215.1 lm/W	2064.6 lm/m	B	186.2 lm/W	1787.7 lm/m	C	153.7 lm/W	1475.4 lm/m	D
5000 K	214.7 lm/W	2060.8 lm/m	B	187.4 lm/W	1799.2 lm/m	C	155.2 lm/W	1489.8 lm/m	D
6500 K	205.8 lm/W	1975.5 lm/m	B	179.1 lm/W	1719.7 lm/m	C	148.7 lm/W	1427.5 lm/m	D

Grade DN (1st Tier) · 11.5W/m

Grade DN (1st Tier) · 11.5W/m — measured at 11.5 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	166.2 lm/W	1911.6 lm/m	D	140.3 lm/W	1613.7 lm/m	E	—	—	—
2300 K	181.3 lm/W	2084.8 lm/m	C	156.6 lm/W	1800.6 lm/m	D	126.5 lm/W	1455.2 lm/m	E
2700 K	195.4 lm/W	2246.8 lm/m	C	169.5 lm/W	1948.9 lm/m	D	137.4 lm/W	1579.8 lm/m	E
3000 K	205.2 lm/W	2360 lm/m	B	178.8 lm/W	2056.5 lm/m	C	145.4 lm/W	1672.6 lm/m	E
3500 K	208.3 lm/W	2395.1 lm/m	B	182.7 lm/W	2100.7 lm/m	C	150.4 lm/W	1729.2 lm/m	D
4000 K	212.2 lm/W	2440.4 lm/m	B	183.8 lm/W	2113.1 lm/m	C	151.6 lm/W	1744 lm/m	D
5000 K	211.8 lm/W	2435.9 lm/m	B	184.9 lm/W	2126.7 lm/m	C	153.1 lm/W	1761 lm/m	D
6500 K	203.1 lm/W	2335.1 lm/m	B	176.8 lm/W	2032.7 lm/m	C	146.7 lm/W	1687.3 lm/m	D

Grade KE (3rd Tier) · 5.8W/m

Grade KE (3rd Tier) · 5.8W/m — measured at 5.8 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	143.6 lm/W	832.9 lm/m	D	115.2 lm/W	668.2 lm/m	E	—	—	—
2300 K	160 lm/W	928 lm/m	D	128.4 lm/W	744.9 lm/m	E	103.7 lm/W	601.6 lm/m	F
2700 K	172.5 lm/W	1000.5 lm/m	C	139.4 lm/W	808.5 lm/m	D	113 lm/W	655.1 lm/m	E
3000 K	181.1 lm/W	1050.4 lm/m	C	147.2 lm/W	853.7 lm/m	D	119.7 lm/W	694.4 lm/m	E
3500 K	183.9 lm/W	1066.5 lm/m	C	150.1 lm/W	870.3 lm/m	D	123.5 lm/W	716.3 lm/m	E
4000 K	189.2 lm/W	1097.4 lm/m	B	153.2 lm/W	888.7 lm/m	D	126.5 lm/W	733.6 lm/m	E
5000 K	189 lm/W	1096.2 lm/m	B	153.2 lm/W	888.7 lm/m	D	126.9 lm/W	736 lm/m	E
6500 K	181.1 lm/W	1050.4 lm/m	C	147.1 lm/W	853.1 lm/m	D	122.1 lm/W	708 lm/m	E

Grade KE (3rd Tier) · 9.6W/m

Grade KE (3rd Tier) · 9.6W/m — measured at 9.6 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	139.8 lm/W	1342.2 lm/m	D	112.2 lm/W	1076.8 lm/m	E	—	—	—
2300 K	155.8 lm/W	1495.5 lm/m	D	125 lm/W	1200.4 lm/m	E	101 lm/W	969.5 lm/m	F
2700 K	168 lm/W	1612.4 lm/m	C	135.7 lm/W	1302.9 lm/m	D	110 lm/W	1055.8 lm/m	F
3000 K	176.3 lm/W	1692.9 lm/m	C	143.3 lm/W	1375.8 lm/m	D	116.6 lm/W	1119 lm/m	E
3500 K	179 lm/W	1718.7 lm/m	C	146.1 lm/W	1402.6 lm/m	D	120.3 lm/W	1154.4 lm/m	E
4000 K	184.2 lm/W	1768.6 lm/m	C	149.2 lm/W	1432.3 lm/m	D	123.1 lm/W	1182.2 lm/m	E
5000 K	184 lm/W	1766.6 lm/m	C	149.2 lm/W	1432.3 lm/m	D	123.5 lm/W	1186.1 lm/m	E
6500 K	176.3 lm/W	1692.9 lm/m	C	143.2 lm/W	1374.8 lm/m	D	118.9 lm/W	1141 lm/m	E

Grade KE (3rd Tier) · 11.5W/m

Grade KE (3rd Tier) · 11.5W/m — measured at 11.5 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	138 lm/W	1586.6 lm/m	D	110.7 lm/W	1272.9 lm/m	E	—	—	—
2300 K	153.7 lm/W	1767.7 lm/m	D	123.4 lm/W	1419 lm/m	E	99.7 lm/W	1146 lm/m	F
2700 K	165.7 lm/W	1905.9 lm/m	C	133.9 lm/W	1540.1 lm/m	E	108.5 lm/W	1248 lm/m	F
3000 K	174 lm/W	2001 lm/m	C	141.4 lm/W	1626.2 lm/m	D	115 lm/W	1322.7 lm/m	E
3500 K	176.7 lm/W	2031.6 lm/m	C	144.2 lm/W	1657.9 lm/m	D	118.7 lm/W	1364.6 lm/m	E
4000 K	181.8 lm/W	2090.5 lm/m	C	147.2 lm/W	1693 lm/m	D	121.5 lm/W	1397.4 lm/m	E
5000 K	181.6 lm/W	2088.2 lm/m	C	147.2 lm/W	1693 lm/m	D	121.9 lm/W	1402 lm/m	E
6500 K	174 lm/W	2001 lm/m	C	141.3 lm/W	1625.1 lm/m	D	117.3 lm/W	1348.7 lm/m	E

Recommended LED Channels

Mount this LED strip in a DENO LED aluminum profile for heat dissipation, physical protection and diffused, dot-free output.

This strip is 5mm wide, so it needs a channel with at least 7mm inner width (5mm + 2mm clearance). Every profile below meets that.

Modelos relacionados nesta série

See every model in SMD LED Strip Series or narrow to Ultra Narrow. Compare wattage, lumen output and run length in the ProCalc parameter library, or request OEM/ODM pricing on the custom manufacturing page.

Perguntas Frequentes

Quais são as principais especificações da 5267?

5267: 2835, 128 LEDs/m, 24V, PCB de 5mm, FPCB com cobre de 3 oz, corte a cada 8LEDs/62.5mm. Dados fotométricos completos, diagramas de ligação e relatórios de ensaio estão disponíveis na seção de downloads desta página.

Qual pode ser o comprimento de um único trecho desta Fita de LED ultraestreita?

O comprimento máximo de um único trecho deste modelo é 5m. A alimentação pelas duas extremidades ou por uma derivação no ponto central reduz à metade a distância efetiva por segmento, permitindo que uma Fita de LED ultraestreita cubra o dobro desse comprimento em um único circuito quando ligada dessa forma.

A DENO pode personalizar esta Fita de LED ultraestreita para um projeto?

Sim. A DENO fabrica a série de Fitas SMD Ultraestreitas como fornecedora OEM e ODM: comprimento do rolo, temperatura de cor, classificação de IRC (CRI), largura da PCB, impermeabilização e identificação com marca própria podem ser especificados. Solicite um Orçamento para obter o prazo de entrega e os preços do projeto.

Quanto uma Fita de LED de alta eficácia pode reduzir o consumo de energia?

A substituição de uma Fita de LED típica de 100 lm/W por uma Fita de LED de alto fluxo luminoso de 180 a 200 lm/W reduz aproximadamente pela metade a potência necessária para o mesmo fluxo luminoso. Em um trecho longo de instalação comercial, isso também reduz a capacidade necessária do Driver / Fonte de Alimentação e ajuda a instalação a atingir uma classe energética ErP melhor.

Qual é a largura mínima de uma Fita de LED estreita?

A DENO fabrica FPCB com largura mínima de 3 mm. Uma Fita de LED de 3 mm cabe em canais de alumínio, rebaixos de armários, bordas de prateleiras e rasgos arquitetônicos estreitos onde uma placa de 8 ou 10 mm não pode ser ocultada, mantendo cobre de 2 oz para estabilidade em trechos longos.

Engineering & selection guide

Bending limits, IP selection, voltage drop, cutting and the full buyer Q&A for this family are kept on the series page.

ultra narrow LED strip series — Ultra Narrow LED Strip — Buyer Questions
LED strip engineering selection handbook