How narrow can a 3mm LED strip be?

DENO's ultra-narrow boards start at 3 mm PCB width, with 4 mm, 5 mm, 6 mm and 8 mm as standard steps. A 3 mm strip fits inside slim aluminium reveals, glass-edge details and joinery grooves that will not accept the usual 8–10 mm tape.

Is a narrow LED strip less bright?

Not necessarily, but it has less copper for heat spreading, so output per metre is limited by thermal design rather than by the LEDs. DENO specifies 2 oz copper on 3–5 mm boards and recommends an aluminium profile; typical usable output is 6–14 W/m depending on width and density.

Can a 3mm LED strip still be high density?

Yes. Micro packages such as 1808, 2110 and 2216 allow 240–480 LEDs/m on a 3–5 mm board, so a narrow reveal can still be dot-free behind a shallow diffuser. Above that density the width usually has to grow to 8 mm for thermal reasons.

How tightly does a narrow LED strip bend?

A 3–5 mm board bends to a much tighter radius than standard tape and can be curved along its length without stressing the copper. For horizontal curves and corners, an S-bend layout removes the need to cut and solder at each turn.

What is the cut unit on an ultra-narrow LED strip?

Cut intervals typically run from 12.5 mm to 50 mm depending on voltage and density, and micro-cut versions shorten this further for exact millwork lengths. Ask for the cut unit in the quote — it decides how closely the finished run matches the drawing.

Can I order a custom width LED strip?

Yes — PCB width from 3 mm, LED density, CCT and CRI, copper weight, cut unit, IP class and connector are all configurable. DENO is a manufacturer, so a non-standard width is tooled from an existing FPCB stack-up instead of being ruled out.

Fita de LED 2835 Ultraestreita (#6644)

Model: 6644

6644 #6644 | Fita de LED 2835 Ultraestreita — 24V, cuttable every 50mm, 5mm FPCB width, 2835 LEDs, 120 LEDs/m, IP20

Visão Geral

Fita de LED Ultraestreita 2835 | 5mm | 24V | 120LEDs | 12W | 50cut | #6644 faz parte da série de Fitas SMD Ultraestreitas da DENO, desenvolvida para Fitas de LED ultraestreitas. Especificações principais: 2835, 120 LEDs/m, 24V, PCB de 5 mm, FPCB com cobre de 3oz, corte a cada 6LEDs/50mm. Cada rolo é produzido na linha rolo a rolo da DENO com FPCB de cobre com pureza de 99.9% e é fornecido em conformidade com CE, UL e RoHS para projetos de arquitetura, varejo e hotelaria. Configurações OEM e ODM de comprimento, temperatura de cor e impermeabilização estão disponíveis sob consulta.

Descrição

Esta Fita de LED 2835 com PCB ultraestreita de 5 mm cabe em espaços reduzidos, sendo uma solução ideal para iluminação arquitetônica de armários com perfis estreitos. Projetada com 120 LEDs por metro e espaçamento de 8.3 mm, esta fita de tensão constante de 24V oferece iluminação suave e dimerizável, com corte a cada 50 mm. Construída com PCB de folha de cobre de 3oz e encapsulamento com fio de ouro de 99.9% de pureza para garantir gerenciamento térmico estável até uma temperatura máxima de carcaça de 75°C. Com ângulo de abertura de 120 graus e diâmetro mínimo de curvatura de 60 mm, o rolo de 5 metros oferece flexibilidade de aplicação em diversas instalações comerciais. Operando de 2.4W a 14.4W por metro, esta fita versátil está disponível para fornecimento de projetos no atacado direto da fábrica e demandas de fabricação OEM.

Ultra Narrow Led Strip built for ultra-narrow smd strips projects.

Especificações

LED QTY	120 LEDs/m
PART NO	DL-F28A60V24-6644-*
SMD TYPE	2835
CUTTABLE UNIT	6LEDs/50mm
DIMMABLE	Yes
IP RATING	IP20
LED PITCH	8.3mm
PCB WIDTH	5 mm
BEAM ANGLE	120°
RUN LENGTH	5M
COPPER FOIL	3oz
ON OFF TIMES	10000（test times）
POWER RANGE	2.4~14.4W
CIRCUIT TYPE	C.V.
INPUT VOLTAGE	24V
MIN BEND DIAMETER	Φ60mm
OPERATING TEMPERATURE	-25~40°C;Tc：75°C（max）

Aplicações

Cove, wall-wash & perimeter lighting — Coves, recesses, wall-wash details and ceiling perimeters where a continuous, uniform line of light is required.
Showroom & hospitality display lighting — Shelving, display cases, reception desks and signage backlighting in shops, showrooms and hospitality spaces.
Kitchen & wardrobe under-cabinet lighting — Kitchen, wardrobe and furniture task lighting where the strip stays hidden and only the light is seen.
Ultra-narrow 5mm channels & shadow gaps — Fits shadow-gap details, slim profiles and joinery grooves that cannot take a standard 8–10mm strip.

Acessórios recomendados e peças compatíveis

DL-0809HX-F — 8.89x7.79mm Mini Recessed LED Channel with Flange — Trimless Aluminum Profile for 5mm Strip: Accepts LED strips up to 5mm wide.
DL-0909HX-M — 9x9mm Magnetic LED Channel — Tool-Free Aluminum Profile for Shelf Lighting: Accepts LED strips up to 5mm wide.
DL-1010HX-V — 10x10mm V Shape Corner LED Channel — 45 Degree Aluminum Profile for Cabinets: Accepts LED strips up to 5mm wide.
DN-PSU-100 — 24V 100W Class-2 LED Driver · High Efficiency: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
DN-PSU-150 — 24V 150W Class-2 LED Driver · Premium: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
DN-PSU-60 — 24V 60W Class-2 LED Driver · Constant Voltage: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
V1 — 5-36VDC 1-Channel * 8A RF+Push Dimming Controller | V1: Matched by input voltage range and colour channels.

Solicite um orçamento para #6644

A DENO LED é uma fabricante de fitas de LED com sede em Shenzhen e base de produção própria em Foshan. Envie-nos o comprimento do trecho, tensão, CCT/IRC e grau de proteção IP que você precisa e nossa equipe de engenharia responderá com uma ficha técnica, diagrama de fiação e preço — OEM/ODM e projetos totalmente personalizados incluídos.

WhatsApp para nossa engenharia Formulário de contato Capacidade OEM / ODM

Garantia: 5 anos
Prazo de entrega: Placas padrão: amostras a partir de 1 dia útil · personalizadas: 3–5 dias úteis · nova FPCB: 1–3 semanas · produção 1–2 semanas após aprovação da amostra
Conformidade: CE · ETL · UL · RoHS
Fio de ligação: Ouro puro 99,99%
Folha de cobre: FPCB de cobre puro 99,9%
Serviços: CCT, IRC, largura de PCB, unidade de corte e embalagem personalizadas — amostras e produção em massa de uma única fábrica.

Desempenho Fotométrico — Matriz de Eficácia CCT × IRC (CRI)

Peak measured luminous efficacy: 139.2 lm/W at 4000K, Ra 80, ErP energy class E (Grade DN (1st Tier)).

All values are measured at the stated power density and ambient 25 °C, reported as luminous efficacy in lumens per watt (lm/W), luminous flux per metre (lm/m) and the corresponding EU ErP (2019/2015) energy class.

Grade DL (2nd Tier)

Grade DL (2nd Tier) — measured at 7.2 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	97 lm/W	698.3 lm/m	F	77.5 lm/W	557.7 lm/m	G	—	—	—
2300 K	107.9 lm/W	776.8 lm/m	F	86.3 lm/W	621.3 lm/m	F	69.9 lm/W	503.3 lm/m	G
2700 K	113.3 lm/W	815.7 lm/m	E	93.3 lm/W	672.1 lm/m	F	75.6 lm/W	544.3 lm/m	G
3000 K	121.5 lm/W	874.7 lm/m	E	98.2 lm/W	707.3 lm/m	F	79.9 lm/W	574.9 lm/m	G
3500 K	123.4 lm/W	888.2 lm/m	E	100 lm/W	720 lm/m	F	82.2 lm/W	592.1 lm/m	G
4000 K	127.3 lm/W	916.6 lm/m	E	102.4 lm/W	737.2 lm/m	F	84.5 lm/W	608.6 lm/m	G
5000 K	127.1 lm/W	915.1 lm/m	E	102.3 lm/W	736.4 lm/m	F	84.4 lm/W	607.7 lm/m	G
6500 K	116.1 lm/W	835.8 lm/m	E	98.1 lm/W	706.5 lm/m	F	81.4 lm/W	586.1 lm/m	G

Grade DL (2nd Tier)

Grade DL (2nd Tier) — measured at 9.6 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	95.4 lm/W	915.5 lm/m	F	76.2 lm/W	731.2 lm/m	G	—	—	—
2300 K	106.1 lm/W	1018.4 lm/m	F	84.8 lm/W	814.5 lm/m	G	68.7 lm/W	659.5 lm/m	G
2700 K	111.4 lm/W	1069.4 lm/m	E	91.8 lm/W	881.2 lm/m	F	74.3 lm/W	713.6 lm/m	G
3000 K	119.5 lm/W	1146.8 lm/m	E	96.6 lm/W	927.2 lm/m	F	78.5 lm/W	753.8 lm/m	G
3500 K	121.3 lm/W	1164.4 lm/m	E	98.3 lm/W	943.9 lm/m	F	80.9 lm/W	776.3 lm/m	G
4000 K	125.2 lm/W	1201.7 lm/m	E	100.7 lm/W	966.4 lm/m	F	83.1 lm/W	797.9 lm/m	G
5000 K	125 lm/W	1199.7 lm/m	E	100.6 lm/W	965.5 lm/m	F	83 lm/W	796.8 lm/m	G
6500 K	114.1 lm/W	1095.8 lm/m	E	96.5 lm/W	926.3 lm/m	F	80.1 lm/W	769 lm/m	G

Grade DL (2nd Tier)

Grade DL (2nd Tier) — measured at 12 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	93.8 lm/W	1125.2 lm/m	F	74.9 lm/W	898.7 lm/m	G	—	—	—
2300 K	104.3 lm/W	1251.7 lm/m	F	83.4 lm/W	1001.1 lm/m	G	67.6 lm/W	811.2 lm/m	G
2700 K	109.5 lm/W	1314.4 lm/m	F	90.3 lm/W	1083.1 lm/m	F	73.1 lm/W	877 lm/m	G
3000 K	117.5 lm/W	1409.5 lm/m	E	95 lm/W	1139.7 lm/m	F	77.2 lm/W	926.4 lm/m	G
3500 K	119.3 lm/W	1431.2 lm/m	E	96.7 lm/W	1160.2 lm/m	F	79.5 lm/W	954.1 lm/m	G
4000 K	123.1 lm/W	1477 lm/m	E	99 lm/W	1187.9 lm/m	F	81.7 lm/W	980.7 lm/m	G
5000 K	122.9 lm/W	1474.6 lm/m	E	98.9 lm/W	1186.7 lm/m	F	81.6 lm/W	979.2 lm/m	G
6500 K	112.2 lm/W	1346.9 lm/m	E	94.9 lm/W	1138.5 lm/m	F	78.7 lm/W	944.4 lm/m	G

Grade DN (1st Tier)

Grade DN (1st Tier) — measured at 7.2 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	109.1 lm/W	785.8 lm/m	F	91.7 lm/W	660.2 lm/m	G	—	—	—
2300 K	119 lm/W	856.8 lm/m	E	102.3 lm/W	736.4 lm/m	F	82.8 lm/W	596.2 lm/m	G
2700 K	128.2 lm/W	923.3 lm/m	E	110.7 lm/W	797 lm/m	F	89.7 lm/W	645.9 lm/m	G
3000 K	134.7 lm/W	969.7 lm/m	E	116.9 lm/W	841.8 lm/m	F	95.1 lm/W	684.8 lm/m	F
3500 K	136.8 lm/W	984.6 lm/m	E	119.5 lm/W	860.5 lm/m	E	98.3 lm/W	708 lm/m	F
4000 K	139.2 lm/W	1002.6 lm/m	E	120.1 lm/W	865 lm/m	E	99.2 lm/W	714 lm/m	F
5000 K	139 lm/W	1001.1 lm/m	E	121 lm/W	871 lm/m	E	99.8 lm/W	718.6 lm/m	F
6500 K	133.3 lm/W	960 lm/m	E	115.6 lm/W	832.1 lm/m	F	95.9 lm/W	690.5 lm/m	F

Grade DN (1st Tier)

Grade DN (1st Tier) — measured at 9.6 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	107.3 lm/W	1030.2 lm/m	F	90.2 lm/W	865.5 lm/m	G	—	—	—
2300 K	117 lm/W	1123.3 lm/m	F	100.6 lm/W	965.5 lm/m	F	81.5 lm/W	782.4 lm/m	G
2700 K	126.1 lm/W	1210.5 lm/m	E	108.8 lm/W	1044.9 lm/m	F	88.2 lm/W	846.9 lm/m	G
3000 K	132.4 lm/W	1271.3 lm/m	E	115 lm/W	1103.7 lm/m	F	93.5 lm/W	897.8 lm/m	F
3500 K	134.5 lm/W	1290.9 lm/m	E	117.5 lm/W	1128.2 lm/m	F	96.7 lm/W	928.2 lm/m	F
4000 K	136.9 lm/W	1314.4 lm/m	E	118.1 lm/W	1134.1 lm/m	F	97.5 lm/W	936.1 lm/m	F
5000 K	136.7 lm/W	1312.4 lm/m	E	118.9 lm/W	1141.9 lm/m	E	98.1 lm/W	941.8 lm/m	F
6500 K	131.1 lm/W	1258.5 lm/m	E	113.6 lm/W	1090.9 lm/m	F	94.3 lm/W	905.3 lm/m	F

Grade DN (1st Tier)

Grade DN (1st Tier) — measured at 12 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	105.5 lm/W	1266.2 lm/m	F	88.6 lm/W	1063.8 lm/m	G	—	—	—
2300 K	115.1 lm/W	1380.6 lm/m	F	98.9 lm/W	1186.7 lm/m	F	80.1 lm/W	961.2 lm/m	G
2700 K	124 lm/W	1487.8 lm/m	E	107 lm/W	1284.2 lm/m	F	86.7 lm/W	1040.9 lm/m	G
3000 K	130.2 lm/W	1562.5 lm/m	E	113 lm/W	1356.5 lm/m	F	92 lm/W	1103.5 lm/m	F
3500 K	132.2 lm/W	1586.6 lm/m	E	115.6 lm/W	1386.6 lm/m	F	95.1 lm/W	1140.9 lm/m	F
4000 K	134.6 lm/W	1615.5 lm/m	E	116.2 lm/W	1393.9 lm/m	F	95.9 lm/W	1150.5 lm/m	F
5000 K	134.4 lm/W	1613.1 lm/m	E	117 lm/W	1403.5 lm/m	F	96.5 lm/W	1158 lm/m	F
6500 K	128.9 lm/W	1546.9 lm/m	E	111.7 lm/W	1340.9 lm/m	F	92.7 lm/W	1112.4 lm/m	F

Grade KE (3rd Tier)

Grade KE (3rd Tier) — measured at 7.2 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	76.1 lm/W	548 lm/m	G	60.5 lm/W	435.9 lm/m	G	—	—	—
2300 K	84.8 lm/W	610.8 lm/m	G	67.5 lm/W	486 lm/m	G	54.7 lm/W	393.8 lm/m	G
2700 K	91.5 lm/W	658.7 lm/m	F	73.2 lm/W	527.1 lm/m	G	59.4 lm/W	427.6 lm/m	G
3000 K	96 lm/W	691.6 lm/m	F	77.5 lm/W	557.7 lm/m	G	63 lm/W	453.8 lm/m	G
3500 K	97.5 lm/W	702 lm/m	F	79 lm/W	568.9 lm/m	G	65 lm/W	468 lm/m	G
4000 K	100.3 lm/W	722.2 lm/m	F	80.7 lm/W	580.9 lm/m	G	66.6 lm/W	479.2 lm/m	G
5000 K	100.2 lm/W	721.5 lm/m	F	80.7 lm/W	580.9 lm/m	G	66.6 lm/W	479.5 lm/m	G
6500 K	96 lm/W	691.6 lm/m	F	77.5 lm/W	557.7 lm/m	G	64.3 lm/W	463 lm/m	G

Grade KE (3rd Tier)

Grade KE (3rd Tier) — measured at 9.6 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	74.8 lm/W	718.5 lm/m	G	59.5 lm/W	571.4 lm/m	G	—	—	—
2300 K	83.4 lm/W	800.8 lm/m	G	66.4 lm/W	637.1 lm/m	G	53.8 lm/W	516.5 lm/m	G
2700 K	90 lm/W	863.5 lm/m	F	72 lm/W	691 lm/m	G	58.4 lm/W	560.7 lm/m	G
3000 K	94.4 lm/W	906.7 lm/m	F	76.2 lm/W	731.2 lm/m	G	62 lm/W	595 lm/m	G
3500 K	95.9 lm/W	920.4 lm/m	F	77.7 lm/W	745.9 lm/m	G	63.9 lm/W	613.6 lm/m	G
4000 K	98.6 lm/W	946.8 lm/m	F	79.3 lm/W	761.6 lm/m	G	65.4 lm/W	628.3 lm/m	G
5000 K	98.5 lm/W	945.9 lm/m	F	79.3 lm/W	761.6 lm/m	G	65.4 lm/W	627.8 lm/m	G
6500 K	94.4 lm/W	906.7 lm/m	F	76.2 lm/W	731.2 lm/m	G	63.2 lm/W	606.7 lm/m	G

Grade KE (3rd Tier)

Grade KE (3rd Tier) — measured at 12 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	73.6 lm/W	883.1 lm/m	G	58.5 lm/W	702.4 lm/m	G	—	—	—
2300 K	82 lm/W	984.3 lm/m	G	65.3 lm/W	783.1 lm/m	G	52.9 lm/W	634.8 lm/m	G
2700 K	88.4 lm/W	1061.4 lm/m	F	70.8 lm/W	849.3 lm/m	G	57.4 lm/W	689.1 lm/m	G
3000 K	92.9 lm/W	1114.4 lm/m	F	74.9 lm/W	898.7 lm/m	G	60.9 lm/W	731.3 lm/m	G
3500 K	94.3 lm/W	1131.2 lm/m	F	76.4 lm/W	916.8 lm/m	G	62.8 lm/W	754.2 lm/m	G
4000 K	97 lm/W	1163.8 lm/m	F	78 lm/W	936.1 lm/m	G	64.4 lm/W	772.2 lm/m	G
5000 K	96.9 lm/W	1162.6 lm/m	F	78 lm/W	936.1 lm/m	G	64.4 lm/W	772.8 lm/m	G
6500 K	92.9 lm/W	1114.4 lm/m	F	74.9 lm/W	898.7 lm/m	G	62.2 lm/W	746.4 lm/m	G

Recommended LED Channels

Mount this LED strip in a DENO LED aluminum profile for heat dissipation, physical protection and diffused, dot-free output.

This strip is 5mm wide, so it needs a channel with at least 7mm inner width (5mm + 2mm clearance). Every profile below meets that.

Modelos relacionados nesta série

See every model in SMD LED Strip Series or narrow to Ultra Narrow. Compare wattage, lumen output and run length in the ProCalc parameter library, or request OEM/ODM pricing on the custom manufacturing page.

Perguntas Frequentes

Quais são as principais especificações de 6644?

6644: 2835, 120 LEDs/m, 24V, PCB de 5 mm, FPCB com cobre de 3oz, corte a cada 6LEDs/50mm. Dados fotométricos completos, diagramas de ligação e relatórios de ensaio estão disponíveis na seção de downloads desta página.

Qual pode ser o comprimento de um trecho único desta Fita de LED ultraestreita?

O comprimento máximo de um trecho único deste modelo é 5M. Alimentar por ambas as extremidades ou usar um ponto de alimentação central reduz pela metade a distância efetiva por segmento, permitindo que uma Fita de LED ultraestreita cubra o dobro desse comprimento em um único circuito quando conectada dessa forma.

A DENO pode personalizar esta Fita de LED ultraestreita para um projeto?

Sim. A DENO fabrica a série de Fitas SMD Ultraestreitas como fornecedora OEM e ODM: comprimento do rolo, temperatura de cor, nível de IRC (CRI), largura da PCB, impermeabilização e identificação com marca própria podem ser especificados. Solicite um Orçamento para obter o prazo de entrega e os preços do projeto.

Qual é a largura mínima de uma Fita de LED estreita?

A DENO fabrica FPCB com largura de até 3 mm. Uma Fita de LED de 3 mm cabe em canais de alumínio, rebaixos de armários, bordas de prateleiras e rasgos arquitetônicos estreitos nos quais uma placa de 8 ou 10 mm não pode ficar oculta, mantendo ainda cobre de 2 oz para trechos longos estáveis.

Qual Driver / Fonte de Alimentação para LED e qual comprimento de trecho são adequados para #6644?

#6644 | Fita de LED Ultraestreita 2835 é um produto de tensão constante de 24V, portanto combine-o com um Driver / Fonte de Alimentação para LED de tensão constante de 24V com certificação CE ou UL e potência nominal cerca de 20% acima da carga conectada. O comprimento máximo de um trecho único é 5M. Alimentação por uma extremidade: 5m/por ambas as extremidades: 10m. Alimentar por ambas as extremidades ou pelo ponto central reduz pela metade a distância percorrida no cobre e reduz a queda de tensão para aproximadamente um quarto.

Engineering & selection guide

Bending limits, IP selection, voltage drop, cutting and the full buyer Q&A for this family are kept on the series page.

ultra narrow LED strip series — Ultra Narrow LED Strip — Buyer Questions
LED strip engineering selection handbook