What is a side bending LED neon flex?

A side bend neon strip flexes left and right in the plane of the emitting face, so the run can follow a curve drawn on a wall or ceiling without twisting. The FPCB is built narrow with a serpentine copper layout, which is what allows horizontal bending without cracking the copper or stressing the solder joints.

Side bend or top bend — which one does my layout need?

Trace the run on the drawing: if the curve stays flat against the mounting surface (a circle on a wall, a wave along a ceiling), you need a side bending neon flex. If the curve climbs over an edge or follows a dome, you need top bend. Mixed geometry is normally split into two lengths joined at a straight section rather than forced onto one body.

What is the minimum bend radius of a side emitting bendable neon strip?

Typical side bend bodies hold R30 mm at 6×12 mm and R80–R120 mm at 12×25 mm; the wider the body in the bend plane, the larger the radius. Staying above the rated radius keeps the outer wall from whitening and prevents the pitch from opening up into visible dark spots on the outside of the curve.

Is side bend neon flex used for building contour lighting?

It is the default choice. Building contour and outline work follows the plane of the façade — cornices, arches, balcony edges — so the run must bend sideways while staying flat against the substrate. Combined with an IP67 injection-moulded body and stainless clips, a side bend LED neon flex holds a clean architectural outline through weather cycling.

Can flexible neon for curved walls be pre-shaped at the factory?

Yes. Send the radius set or a DXF outline and DENO supplies pre-formed lengths in a moldable bend groove, cut and terminated per segment. This removes on-site guesswork on scripts and logos, where an installer bending by hand will otherwise produce inconsistent curve tension along the run.

How far can one side bend neon run go on a single feed?

At 24V constant voltage, a 10 W/m body holds acceptable uniformity to about 5 m single-end or 10 m fed from both ends. Beyond that, use a constant-current build or 48V so the far end of the outline does not read dimmer than the start — the failure mode that shows up most on long contour runs.

Neon flexível de LED em Silicone 1018 (#1018S-EE)

24V · 120LEDs · 50mm/corte · 10*18mm

Model: 1018S-EE

Visão Geral

O Neon flexível de LED em silicone DENO LED 1018S-EE apresenta um design miniaturizado de 10x18mm, oferecendo flexibilidade excepcional para contornos arquitetônicos complexos e diversos projetos de iluminação. Totalmente encapsulado, oferece resistência superior a sal, água, UV, abrasão e corrosão química, tornando-o ideal para aplicações B2B internas e externas. Com silicone de alto desempenho que garante estabilidade de cor e longa vida útil, esta Fita de LED de 24V é dimerizável, com corte de 50mm...

Descrição

Projetado com um perfil de silicone de 10x18mm, este Neon flexível de LED utiliza LEDs SMD 2835 para oferecer iluminação uniforme, sem pontos de luz visíveis, com ângulo de abertura de 120 graus. Operando em um circuito de tensão constante de 24V, este Neon flexível de LED dimerizável apresenta intervalos de corte precisos de 50mm para agilizar instalações em projetos com fornecimento no atacado. A extrusão de silicone premium resiste a sal, água, exposição UV, abrasão e corrosão química, evitando o envelhecimento do material em ambientes internos e externos desafiadores. A alta flexibilidade em múltiplos ângulos permite adaptação versátil a contornos para iluminação arquitetônica, destaque de fachadas, expositores comerciais e aplicações decorativas de paisagismo. Construídos com uma PCB robusta com cobre de 3oz, estes sistemas permitem comprimentos personalizados OEM de até 5 metros para desempenho comercial confiável.

Especificações

LED QTY	120
PART NO	DL-NF28C60V24-1018S-EE-*
SMD TYPE	2835
CUTTABLE UNIT	6LEDs/50mm
DIMMABLE	Yes
IP RATING	IP67
LED PITCH	8.334mm
LIFESPAN	30000
PCB WIDTH	10mm
WARRANTY	5 Years
BEAM ANGLE	120°
RUN LENGTH	5m
COPPER FOIL	3oz
POWER RANGE	2.8~28.8W
CIRCUIT TYPE	C.V.
INPUT VOLTAGE	DC 24V
OPERATING TEMPERATURE	-25~40°C;Tc：75°C（max）

Aplicações

Channel letters & logo signage — Silicone neon holds a continuous glow line for logos, channel letters and wayfinding without visible LED dots.
Facade & perimeter outlining — Flexible neon bends around building edges, balconies and columns to trace architecture at night.
Bar fronts, headboards & stair nosings — Used along stair nosings, headboards and bar fronts where a soft, uniform tube of light is wanted instead of a hard strip.
Facade, landscape & bathroom runs (IP67) — IP67 sealing suits facades, landscape lighting, bathrooms and other locations exposed to rain, splashing or wash-down cleaning.

Solicite um orçamento para #1018S-EE

A DENO LED é uma fabricante de fitas de LED com sede em Shenzhen e base de produção própria em Foshan. Envie-nos o comprimento do trecho, tensão, CCT/IRC e grau de proteção IP que você precisa e nossa equipe de engenharia responderá com uma ficha técnica, diagrama de fiação e preço — OEM/ODM e projetos totalmente personalizados incluídos.

WhatsApp para nossa engenharia Formulário de contato Capacidade OEM / ODM

Garantia: 5 anos
Prazo de entrega: Placas padrão: amostras a partir de 1 dia útil · personalizadas: 3–5 dias úteis · nova FPCB: 1–3 semanas · produção 1–2 semanas após aprovação da amostra
Conformidade: CE · ETL · UL · RoHS
Fio de ligação: Ouro puro 99,99%
Folha de cobre: FPCB de cobre puro 99,9%
Serviços: CCT, IRC, largura de PCB, unidade de corte e embalagem personalizadas — amostras e produção em massa de uma única fábrica.

Desempenho Fotométrico — Matriz de Eficácia CCT × IRC (CRI)

Peak measured luminous efficacy: 52.7 lm/W at 4000K, Ra 80, ErP energy class G (Grade DN (1st Tier) · 12W/m).

All values are measured at the stated power density and ambient 25 °C, reported as luminous efficacy in lumens per watt (lm/W), luminous flux per metre (lm/m) and the corresponding EU ErP (2019/2015) energy class.

Grade DL (2nd Tier) · 12W/m

Grade DL (2nd Tier) · 12W/m — measured at 12 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	26.1 lm/W	313.8 lm/m	G	20.1 lm/W	241.6 lm/m	G	—	—	—
2300 K	29.1 lm/W	348.6 lm/m	G	22.3 lm/W	268.1 lm/m	G	18.2 lm/W	218.5 lm/m	G
2700 K	28.7 lm/W	343.8 lm/m	G	24.2 lm/W	290.9 lm/m	G	19.6 lm/W	235.6 lm/m	G
3000 K	32.7 lm/W	391.9 lm/m	G	25.4 lm/W	305.4 lm/m	G	20.7 lm/W	248.9 lm/m	G
3500 K	33.4 lm/W	400.3 lm/m	G	25.9 lm/W	311.4 lm/m	G	21.3 lm/W	256.1 lm/m	G
4000 K	34.4 lm/W	412.4 lm/m	G	26.5 lm/W	318.6 lm/m	G	21.9 lm/W	263.3 lm/m	G
5000 K	34.4 lm/W	412.4 lm/m	G	26.5 lm/W	318.6 lm/m	G	21.7 lm/W	260.6 lm/m	G
6500 K	30.5 lm/W	365.5 lm/m	G	25.4 lm/W	305.4 lm/m	G	21.1 lm/W	252.7 lm/m	G

Grade DL (2nd Tier) · 14.4W/m

Grade DL (2nd Tier) · 14.4W/m — measured at 14.4 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	25.7 lm/W	370.2 lm/m	G	19.8 lm/W	285.1 lm/m	G	—	—	—
2300 K	28.6 lm/W	411.4 lm/m	G	22 lm/W	316.3 lm/m	G	17.9 lm/W	257.8 lm/m	G
2700 K	28.2 lm/W	405.7 lm/m	G	23.8 lm/W	343.3 lm/m	G	19.3 lm/W	278 lm/m	G
3000 K	32.1 lm/W	462.4 lm/m	G	25 lm/W	360.3 lm/m	G	20.4 lm/W	293.6 lm/m	G
3500 K	32.8 lm/W	472.4 lm/m	G	25.5 lm/W	367.4 lm/m	G	21 lm/W	302.1 lm/m	G
4000 K	33.8 lm/W	486.6 lm/m	G	26.1 lm/W	375.9 lm/m	G	21.6 lm/W	310.7 lm/m	G
5000 K	33.8 lm/W	486.6 lm/m	G	26.1 lm/W	375.9 lm/m	G	21.4 lm/W	307.5 lm/m	G
6500 K	29.9 lm/W	431.2 lm/m	G	25 lm/W	360.3 lm/m	G	20.7 lm/W	298.2 lm/m	G

Grade DL (2nd Tier) · 19.2W/m

Grade DL (2nd Tier) · 19.2W/m — measured at 19.2 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	24.9 lm/W	477.3 lm/m	G	19.1 lm/W	367.6 lm/m	G	—	—	—
2300 K	27.6 lm/W	530.3 lm/m	G	21.2 lm/W	407.8 lm/m	G	17.3 lm/W	332.4 lm/m	G
2700 K	27.2 lm/W	523 lm/m	G	23 lm/W	442.5 lm/m	G	18.7 lm/W	358.4 lm/m	G
3000 K	31 lm/W	596.1 lm/m	G	24.2 lm/W	464.5 lm/m	G	19.7 lm/W	378.5 lm/m	G
3500 K	31.7 lm/W	608.9 lm/m	G	24.7 lm/W	473.6 lm/m	G	20.3 lm/W	389.5 lm/m	G
4000 K	32.7 lm/W	627.2 lm/m	G	25.2 lm/W	484.6 lm/m	G	20.9 lm/W	400.5 lm/m	G
5000 K	32.7 lm/W	627.2 lm/m	G	25.2 lm/W	484.6 lm/m	G	20.6 lm/W	396.5 lm/m	G
6500 K	29 lm/W	555.9 lm/m	G	24.2 lm/W	464.5 lm/m	G	20 lm/W	384.5 lm/m	G

Grade DN (1st Tier) · 12W/m

Grade DN (1st Tier) · 12W/m — measured at 12 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	41.3 lm/W	495.3 lm/m	G	34 lm/W	407.5 lm/m	G	—	—	—
2300 K	45 lm/W	539.8 lm/m	G	38 lm/W	455.6 lm/m	G	30.6 lm/W	367.2 lm/m	G
2700 K	48.5 lm/W	581.9 lm/m	G	41 lm/W	491.7 lm/m	G	33.3 lm/W	399.1 lm/m	G
3000 K	50.9 lm/W	610.7 lm/m	G	43.5 lm/W	521.8 lm/m	G	35.4 lm/W	424.4 lm/m	G
3500 K	51.7 lm/W	620.3 lm/m	G	44.5 lm/W	533.8 lm/m	G	36.6 lm/W	438.8 lm/m	G
4000 K	52.7 lm/W	632.4 lm/m	G	44.7 lm/W	536.2 lm/m	G	36.9 lm/W	442.4 lm/m	G
5000 K	52.6 lm/W	631.2 lm/m	G	45 lm/W	539.8 lm/m	G	36.5 lm/W	438 lm/m	G
6500 K	50.4 lm/W	604.7 lm/m	G	43 lm/W	515.7 lm/m	G	35.4 lm/W	424.7 lm/m	G

Grade DN (1st Tier) · 14.4W/m

Grade DN (1st Tier) · 14.4W/m — measured at 14.4 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	40.6 lm/W	584.4 lm/m	G	33.4 lm/W	480.9 lm/m	G	—	—	—
2300 K	44.2 lm/W	636.9 lm/m	G	37.3 lm/W	537.6 lm/m	G	30.1 lm/W	433.3 lm/m	G
2700 K	47.7 lm/W	686.6 lm/m	G	40.3 lm/W	580.2 lm/m	G	32.7 lm/W	470.9 lm/m	G
3000 K	50 lm/W	720.6 lm/m	G	42.8 lm/W	615.6 lm/m	G	34.8 lm/W	500.7 lm/m	G
3500 K	50.8 lm/W	732 lm/m	G	43.7 lm/W	629.8 lm/m	G	36 lm/W	517.8 lm/m	G
4000 K	51.8 lm/W	746.1 lm/m	G	43.9 lm/W	632.7 lm/m	G	36.3 lm/W	522 lm/m	G
5000 K	51.7 lm/W	744.7 lm/m	G	44.2 lm/W	636.9 lm/m	G	35.9 lm/W	516.8 lm/m	G
6500 K	49.5 lm/W	713.5 lm/m	G	42.3 lm/W	608.5 lm/m	G	34.8 lm/W	501.1 lm/m	G

Grade DN (1st Tier) · 19.2W/m

Grade DN (1st Tier) · 19.2W/m — measured at 19.2 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	39.2 lm/W	753.4 lm/m	G	32.3 lm/W	619.9 lm/m	G	—	—	—
2300 K	42.8 lm/W	821.1 lm/m	G	36.1 lm/W	693.1 lm/m	G	29.1 lm/W	558.5 lm/m	G
2700 K	46.1 lm/W	885.1 lm/m	G	39 lm/W	747.9 lm/m	G	31.6 lm/W	607.1 lm/m	G
3000 K	48.4 lm/W	929 lm/m	G	41.3 lm/W	793.6 lm/m	G	33.6 lm/W	645.5 lm/m	G
3500 K	49.1 lm/W	943.6 lm/m	G	42.3 lm/W	811.9 lm/m	G	34.8 lm/W	667.5 lm/m	G
4000 K	50.1 lm/W	961.9 lm/m	G	42.5 lm/W	815.6 lm/m	G	35 lm/W	672.9 lm/m	G
5000 K	50 lm/W	960 lm/m	G	42.8 lm/W	821.1 lm/m	G	34.7 lm/W	666.2 lm/m	G
6500 K	47.9 lm/W	919.8 lm/m	G	40.9 lm/W	784.5 lm/m	G	33.6 lm/W	646 lm/m	G

Grade KE (3rd Tier) · 12W/m

Grade KE (3rd Tier) · 12W/m — measured at 12 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	6.4 lm/W	76.9 lm/m	G	4.1 lm/W	49.3 lm/m	G	—	—	—
2300 K	7.1 lm/W	85.4 lm/m	G	4.6 lm/W	55.3 lm/m	G	3.9 lm/W	46.9 lm/m	G
2700 K	7.7 lm/W	92.6 lm/m	G	4.9 lm/W	58.9 lm/m	G	3.9 lm/W	46.9 lm/m	G
3000 K	8.1 lm/W	97.4 lm/m	G	5.4 lm/W	64.9 lm/m	G	4.4 lm/W	52.9 lm/m	G
3500 K	8.2 lm/W	98.6 lm/m	G	5.5 lm/W	66.1 lm/m	G	4.6 lm/W	55.3 lm/m	G
4000 K	8.4 lm/W	101 lm/m	G	5.7 lm/W	68.5 lm/m	G	4.7 lm/W	56.5 lm/m	G
5000 K	8.4 lm/W	101 lm/m	G	5.7 lm/W	68.5 lm/m	G	4.7 lm/W	55.9 lm/m	G
6500 K	8.1 lm/W	97.4 lm/m	G	5.4 lm/W	64.9 lm/m	G	4.5 lm/W	54.2 lm/m	G

Grade KE (3rd Tier) · 14.4W/m

Grade KE (3rd Tier) · 14.4W/m — measured at 14.4 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	6.3 lm/W	90.8 lm/m	G	4 lm/W	58.2 lm/m	G	—	—	—
2300 K	7 lm/W	100.7 lm/m	G	4.5 lm/W	65.3 lm/m	G	3.8 lm/W	55.3 lm/m	G
2700 K	7.6 lm/W	109.2 lm/m	G	4.8 lm/W	69.5 lm/m	G	3.8 lm/W	55.3 lm/m	G
3000 K	8 lm/W	114.9 lm/m	G	5.3 lm/W	76.6 lm/m	G	4.3 lm/W	62.4 lm/m	G
3500 K	8.1 lm/W	116.3 lm/m	G	5.4 lm/W	78 lm/m	G	4.5 lm/W	65.3 lm/m	G
4000 K	8.3 lm/W	119.2 lm/m	G	5.6 lm/W	80.9 lm/m	G	4.6 lm/W	66.7 lm/m	G
5000 K	8.3 lm/W	119.2 lm/m	G	5.6 lm/W	80.9 lm/m	G	4.6 lm/W	66 lm/m	G
6500 K	8 lm/W	114.9 lm/m	G	5.3 lm/W	76.6 lm/m	G	4.4 lm/W	64 lm/m	G

Grade KE (3rd Tier) · 19.2W/m

Grade KE (3rd Tier) · 19.2W/m — measured at 19.2 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	6.1 lm/W	117 lm/m	G	3.9 lm/W	75 lm/m	G	—	—	—
2300 K	6.8 lm/W	129.8 lm/m	G	4.4 lm/W	84.1 lm/m	G	3.7 lm/W	71.3 lm/m	G
2700 K	7.3 lm/W	140.8 lm/m	G	4.7 lm/W	89.6 lm/m	G	3.7 lm/W	71.3 lm/m	G
3000 K	7.7 lm/W	148.1 lm/m	G	5.1 lm/W	98.7 lm/m	G	4.2 lm/W	80.5 lm/m	G
3500 K	7.8 lm/W	149.9 lm/m	G	5.2 lm/W	100.6 lm/m	G	4.4 lm/W	84.1 lm/m	G
4000 K	8 lm/W	153.6 lm/m	G	5.4 lm/W	104.2 lm/m	G	4.5 lm/W	85.9 lm/m	G
5000 K	8 lm/W	153.6 lm/m	G	5.4 lm/W	104.2 lm/m	G	4.4 lm/W	85.1 lm/m	G
6500 K	7.7 lm/W	148.1 lm/m	G	5.1 lm/W	98.7 lm/m	G	4.3 lm/W	82.5 lm/m	G

Modelos relacionados nesta série

See every model in Neon LED Strip Series or narrow to Side Bend. Compare wattage, lumen output and run length in the ProCalc parameter library, or request OEM/ODM pricing on the custom manufacturing page.

Perguntas Frequentes

Quais são as principais vantagens do silicone utilizado no 1018S-EE?

O silicone de alto desempenho garante proteção por encapsulamento completo contra sal, água, UV e produtos químicos, com uma estrutura molecular estável que evita descoloração ou envelhecimento.

Que tipo de flexibilidade de instalação o 1018S-EE oferece?

Com seu design miniaturizado de 10x18mm e capacidade de curvatura em múltiplos ângulos, oferece flexibilidade extremamente alta, adaptando-se a ambientes de instalação complexos e a diversos requisitos de conformação.

O 1018S-EE é adequado para projetos comerciais externos?

Sim. Seu encapsulamento completo e sua resistência a fatores ambientais como sal, água e UV o tornam ideal para decoração arquitetônica e paisagística externa.

Quais são os prazos típicos de entrega para grandes pedidos ou configurações personalizadas do 1018S-EE?

Os prazos de entrega variam conforme o volume do pedido e a personalização. Entre em contato diretamente com nossa equipe de vendas e informe os detalhes do seu projeto para obter um Orçamento e um cronograma precisos.

Quais são as principais especificações do #1018S-EE?

Neon flexível de LED em silicone 1018 | 10*18mm | 24V | 120LEDs | 50mm/corte | #1018S-EE: LEDs 2835, 120, DC 24V, FPCB de 10mm, folha de cobre de 3oz, potência de 2.8~28.8W, unidade de corte de 6LEDs/50mm. Arquivos fotométricos, diagramas de ligação e relatórios de ensaio estão disponíveis na seção de downloads desta página.

Engineering & selection guide

Bending limits, IP selection, voltage drop, cutting and the full buyer Q&A for this family are kept on the series page.

LED neon flex selection guide — bend direction and radius, IP rating for facade, pool and wet areas, cutting and feed planning
LED strip engineering selection handbook