What is a side bending LED neon flex?

A side bend neon strip flexes left and right in the plane of the emitting face, so the run can follow a curve drawn on a wall or ceiling without twisting. The FPCB is built narrow with a serpentine copper layout, which is what allows horizontal bending without cracking the copper or stressing the solder joints.

Side bend or top bend — which one does my layout need?

Trace the run on the drawing: if the curve stays flat against the mounting surface (a circle on a wall, a wave along a ceiling), you need a side bending neon flex. If the curve climbs over an edge or follows a dome, you need top bend. Mixed geometry is normally split into two lengths joined at a straight section rather than forced onto one body.

What is the minimum bend radius of a side emitting bendable neon strip?

Typical side bend bodies hold R30 mm at 6×12 mm and R80–R120 mm at 12×25 mm; the wider the body in the bend plane, the larger the radius. Staying above the rated radius keeps the outer wall from whitening and prevents the pitch from opening up into visible dark spots on the outside of the curve.

Is side bend neon flex used for building contour lighting?

It is the default choice. Building contour and outline work follows the plane of the façade — cornices, arches, balcony edges — so the run must bend sideways while staying flat against the substrate. Combined with an IP67 injection-moulded body and stainless clips, a side bend LED neon flex holds a clean architectural outline through weather cycling.

Can flexible neon for curved walls be pre-shaped at the factory?

Yes. Send the radius set or a DXF outline and DENO supplies pre-formed lengths in a moldable bend groove, cut and terminated per segment. This removes on-site guesswork on scripts and logos, where an installer bending by hand will otherwise produce inconsistent curve tension along the run.

How far can one side bend neon run go on a single feed?

At 24V constant voltage, a 10 W/m body holds acceptable uniformity to about 5 m single-end or 10 m fed from both ends. Beyond that, use a constant-current build or 48V so the far end of the outline does not read dimmer than the start — the failure mode that shows up most on long contour runs.

Neon flexível de LED em Silicone 0612 (#0612S-EE)

24V · 120LEDs · 50mm/corte · 6*12mm

Model: 0612S-EE

Visão Geral

O Neon flexível de LED em silicone 0612S-EE da DENO LED é uma solução miniaturizada de 6x12mm, que oferece flexibilidade ultra-alta para instalações complexas. Com encapsulamento completo IP67, resiste a sal, água, UV, abrasão e corrosão química, garantindo estabilidade e ausência de descoloração ao longo do tempo. A fabricação de precisão garante distribuição uniforme da luz, minimizando zonas escuras. Seu desempenho de curvatura em múltiplos ângulos permite contornos arquitetônicos criativos, decoração paisagística, e...

Descrição

Possui seção compacta de 6x12mm com encapsulamento em silicone de alta qualidade, proporcionando flexibilidade superior e resistência à exposição UV, ao sal e à corrosão. LEDs SMD 2835 de Alta Densidade, operando em 24V, proporcionam iluminação uniforme com incrementos precisos de corte de 50mm para layouts personalizados de iluminação arquitetural. O Neon flexível de LED em silicone à prova d'água IP67 suporta condições exigentes em ambientes internos e externos, operando de forma confiável entre -25°C e 40°C. Uma robusta PCB de cobre de 3oz garante desempenho estável em tensão constante e dimerização suave em trechos contínuos de até 5 metros. A DENO oferece fornecimento de projetos no atacado diretamente da fábrica, com personalização OEM para atender fabricantes de sinalização, iluminação de fachadas e displays comerciais.

Especificações

LED QTY	120
PART NO	DL-NF28C60V24-0612S-EE-*
SMD TYPE	2835
CUTTABLE UNIT	6LEDs/50mm
DIMMABLE	Yes
IP RATING	IP67
LED PITCH	8.334mm
LIFESPAN	30000
PCB WIDTH	8mm
WARRANTY	5 Years
RUN LENGTH	5m
COPPER FOIL	3oz
POWER RANGE	7.2~28.8W
CIRCUIT TYPE	C.V.
INPUT VOLTAGE	24V
OPERATING TEMPERATURE	-25~40°C;Tc：75°C（max）

Aplicações

Channel letters & logo signage — Silicone neon holds a continuous glow line for logos, channel letters and wayfinding without visible LED dots.
Facade & perimeter outlining — Flexible neon bends around building edges, balconies and columns to trace architecture at night.
Bar fronts, headboards & stair nosings — Used along stair nosings, headboards and bar fronts where a soft, uniform tube of light is wanted instead of a hard strip.
Facade, landscape & bathroom runs (IP67) — IP67 sealing suits facades, landscape lighting, bathrooms and other locations exposed to rain, splashing or wash-down cleaning.

Solicite um orçamento para #0612S-EE

A DENO LED é uma fabricante de fitas de LED com sede em Shenzhen e base de produção própria em Foshan. Envie-nos o comprimento do trecho, tensão, CCT/IRC e grau de proteção IP que você precisa e nossa equipe de engenharia responderá com uma ficha técnica, diagrama de fiação e preço — OEM/ODM e projetos totalmente personalizados incluídos.

WhatsApp para nossa engenharia Formulário de contato Capacidade OEM / ODM

Garantia: 5 anos
Prazo de entrega: Placas padrão: amostras a partir de 1 dia útil · personalizadas: 3–5 dias úteis · nova FPCB: 1–3 semanas · produção 1–2 semanas após aprovação da amostra
Conformidade: CE · ETL · UL · RoHS
Fio de ligação: Ouro puro 99,99%
Folha de cobre: FPCB de cobre puro 99,9%
Serviços: CCT, IRC, largura de PCB, unidade de corte e embalagem personalizadas — amostras e produção em massa de uma única fábrica.

Desempenho Fotométrico — Matriz de Eficácia CCT × IRC (CRI)

Peak measured luminous efficacy: 59.3 lm/W at 4000K, Ra 80, ErP energy class G (Grade DN (1st Tier) · 9.6W/m).

All values are measured at the stated power density and ambient 25 °C, reported as luminous efficacy in lumens per watt (lm/W), luminous flux per metre (lm/m) and the corresponding EU ErP (2019/2015) energy class.

Grade DL (2nd Tier) · 9.6W/m

Grade DL (2nd Tier) · 9.6W/m — measured at 9.6 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	31.6 lm/W	303.2 lm/m	G	24.4 lm/W	234.6 lm/m	G	—	—	—
2300 K	35 lm/W	336 lm/m	G	27.3 lm/W	261.6 lm/m	G	22.2 lm/W	213.2 lm/m	G
2700 K	35.1 lm/W	337 lm/m	G	29.5 lm/W	282.9 lm/m	G	23.9 lm/W	229.8 lm/m	G
3000 K	39.4 lm/W	378.5 lm/m	G	31.1 lm/W	298.3 lm/m	G	25.2 lm/W	242.3 lm/m	G
3500 K	40.2 lm/W	386.2 lm/m	G	31.6 lm/W	303.2 lm/m	G	26 lm/W	250.1 lm/m	G
4000 K	41.4 lm/W	397.8 lm/m	G	32.4 lm/W	310.9 lm/m	G	26.8 lm/W	256.8 lm/m	G
5000 K	41.4 lm/W	397.8 lm/m	G	32.3 lm/W	309.9 lm/m	G	26.5 lm/W	254.2 lm/m	G
6500 K	37 lm/W	355.3 lm/m	G	31 lm/W	297.4 lm/m	G	25.7 lm/W	246.5 lm/m	G

Grade DL (2nd Tier) · 12W/m

Grade DL (2nd Tier) · 12W/m — measured at 12 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	31.1 lm/W	372.6 lm/m	G	24 lm/W	288.4 lm/m	G	—	—	—
2300 K	34.4 lm/W	413 lm/m	G	26.8 lm/W	321.6 lm/m	G	21.8 lm/W	262 lm/m	G
2700 K	34.5 lm/W	414.1 lm/m	G	29 lm/W	347.7 lm/m	G	23.5 lm/W	282.4 lm/m	G
3000 K	38.8 lm/W	465.2 lm/m	G	30.6 lm/W	366.7 lm/m	G	24.8 lm/W	297.9 lm/m	G
3500 K	39.6 lm/W	474.7 lm/m	G	31.1 lm/W	372.6 lm/m	G	25.6 lm/W	307.3 lm/m	G
4000 K	40.7 lm/W	488.9 lm/m	G	31.8 lm/W	382.1 lm/m	G	26.3 lm/W	315.7 lm/m	G
5000 K	40.7 lm/W	488.9 lm/m	G	31.7 lm/W	380.9 lm/m	G	26 lm/W	312.5 lm/m	G
6500 K	36.4 lm/W	436.7 lm/m	G	30.5 lm/W	365.5 lm/m	G	25.3 lm/W	303 lm/m	G

Grade DL (2nd Tier) · 19.2W/m

Grade DL (2nd Tier) · 19.2W/m — measured at 19.2 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	29.5 lm/W	566.8 lm/m	G	22.8 lm/W	438.6 lm/m	G	—	—	—
2300 K	32.7 lm/W	628.2 lm/m	G	25.5 lm/W	489.2 lm/m	G	20.8 lm/W	398.5 lm/m	G
2700 K	32.8 lm/W	630 lm/m	G	27.5 lm/W	528.9 lm/m	G	22.4 lm/W	429.6 lm/m	G
3000 K	36.9 lm/W	707.6 lm/m	G	29 lm/W	557.8 lm/m	G	23.6 lm/W	453.1 lm/m	G
3500 K	37.6 lm/W	722 lm/m	G	29.5 lm/W	566.8 lm/m	G	24.3 lm/W	467.5 lm/m	G
4000 K	38.7 lm/W	743.7 lm/m	G	30.3 lm/W	581.2 lm/m	G	25 lm/W	480.1 lm/m	G
5000 K	38.7 lm/W	743.7 lm/m	G	30.2 lm/W	579.4 lm/m	G	24.8 lm/W	475.3 lm/m	G
6500 K	34.6 lm/W	664.3 lm/m	G	29 lm/W	556 lm/m	G	24 lm/W	460.9 lm/m	G

Grade DN (1st Tier) · 9.6W/m

Grade DN (1st Tier) · 9.6W/m — measured at 9.6 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	46.6 lm/W	447 lm/m	G	38.5 lm/W	369.8 lm/m	G	—	—	—
2300 K	50.7 lm/W	486.6 lm/m	G	42.9 lm/W	412.3 lm/m	G	34.6 lm/W	332.6 lm/m	G
2700 K	54.7 lm/W	525.2 lm/m	G	46.5 lm/W	446.1 lm/m	G	37.6 lm/W	361.1 lm/m	G
3000 K	57.4 lm/W	551.3 lm/m	G	49.2 lm/W	472.1 lm/m	G	40 lm/W	384.3 lm/m	G
3500 K	58.3 lm/W	560 lm/m	G	50.3 lm/W	482.7 lm/m	G	41.3 lm/W	396.8 lm/m	G
4000 K	59.3 lm/W	569.6 lm/m	G	50.6 lm/W	485.6 lm/m	G	41.7 lm/W	400.7 lm/m	G
5000 K	59.3 lm/W	569.6 lm/m	G	50.9 lm/W	488.5 lm/m	G	41.3 lm/W	396.7 lm/m	G
6500 K	56.8 lm/W	545.5 lm/m	G	48.6 lm/W	466.3 lm/m	G	40.1 lm/W	384.6 lm/m	G

Grade DN (1st Tier) · 12W/m

Grade DN (1st Tier) · 12W/m — measured at 12 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	45.8 lm/W	549.4 lm/m	G	37.9 lm/W	454.5 lm/m	G	—	—	—
2300 K	49.8 lm/W	598.1 lm/m	G	42.2 lm/W	506.7 lm/m	G	34.1 lm/W	408.7 lm/m	G
2700 K	53.8 lm/W	645.5 lm/m	G	45.7 lm/W	548.2 lm/m	G	37 lm/W	443.8 lm/m	G
3000 K	56.5 lm/W	677.6 lm/m	G	48.4 lm/W	580.3 lm/m	G	39.4 lm/W	472.3 lm/m	G
3500 K	57.4 lm/W	688.3 lm/m	G	49.4 lm/W	593.3 lm/m	G	40.6 lm/W	487.7 lm/m	G
4000 K	58.3 lm/W	700.1 lm/m	G	49.7 lm/W	596.9 lm/m	G	41 lm/W	492.5 lm/m	G
5000 K	58.3 lm/W	700.1 lm/m	G	50 lm/W	600.5 lm/m	G	40.6 lm/W	487.5 lm/m	G
6500 K	55.9 lm/W	670.5 lm/m	G	47.8 lm/W	573.2 lm/m	G	39.4 lm/W	472.8 lm/m	G

Grade DN (1st Tier) · 19.2W/m

Grade DN (1st Tier) · 19.2W/m — measured at 19.2 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1800 K	43.5 lm/W	835.7 lm/m	G	36 lm/W	691.3 lm/m	G	—	—	—
2300 K	47.4 lm/W	909.7 lm/m	G	40.1 lm/W	770.7 lm/m	G	32.4 lm/W	621.7 lm/m	G
2700 K	51.1 lm/W	981.9 lm/m	G	43.4 lm/W	833.9 lm/m	G	35.2 lm/W	675.1 lm/m	G
3000 K	53.7 lm/W	1030.7 lm/m	G	46 lm/W	882.7 lm/m	G	37.4 lm/W	718.4 lm/m	G
3500 K	54.5 lm/W	1046.9 lm/m	G	47 lm/W	902.5 lm/m	G	38.6 lm/W	741.9 lm/m	G
4000 K	55.5 lm/W	1065 lm/m	G	47.3 lm/W	907.9 lm/m	G	39 lm/W	749.1 lm/m	G
5000 K	55.5 lm/W	1065 lm/m	G	47.6 lm/W	913.3 lm/m	G	38.6 lm/W	741.6 lm/m	G
6500 K	53.1 lm/W	1019.8 lm/m	G	45.4 lm/W	871.8 lm/m	G	37.5 lm/W	719.1 lm/m	G

Grade KE (3rd Tier) · 9.6W/m

Grade KE (3rd Tier) · 9.6W/m — measured at 9.6 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	11.8 lm/W	113 lm/m	G	8.4 lm/W	81.1 lm/m	G	—	—	—
2300 K	13.1 lm/W	125.5 lm/m	G	9.5 lm/W	90.8 lm/m	G	7.8 lm/W	75.3 lm/m	G
2700 K	14.2 lm/W	136.1 lm/m	G	10.2 lm/W	97.5 lm/m	G	8.2 lm/W	79.2 lm/m	G
3000 K	14.9 lm/W	142.9 lm/m	G	11 lm/W	105.2 lm/m	G	9 lm/W	85.9 lm/m	G
3500 K	15.1 lm/W	144.8 lm/m	G	11.2 lm/W	107.2 lm/m	G	9.3 lm/W	88.8 lm/m	G
4000 K	15.5 lm/W	148.7 lm/m	G	11.5 lm/W	110.1 lm/m	G	9.5 lm/W	90.8 lm/m	G
5000 K	15.5 lm/W	148.7 lm/m	G	11.5 lm/W	110.1 lm/m	G	9.4 lm/W	89.8 lm/m	G
6500 K	14.9 lm/W	142.9 lm/m	G	11 lm/W	105.2 lm/m	G	9.1 lm/W	87.1 lm/m	G

Grade KE (3rd Tier) · 12W/m

Grade KE (3rd Tier) · 12W/m — measured at 12 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	11.6 lm/W	138.8 lm/m	G	8.3 lm/W	99.7 lm/m	G	—	—	—
2300 K	12.9 lm/W	154.3 lm/m	G	9.3 lm/W	111.5 lm/m	G	7.7 lm/W	92.6 lm/m	G
2700 K	13.9 lm/W	167.3 lm/m	G	10 lm/W	119.9 lm/m	G	8.1 lm/W	97.3 lm/m	G
3000 K	14.6 lm/W	175.6 lm/m	G	10.8 lm/W	129.3 lm/m	G	8.8 lm/W	105.6 lm/m	G
3500 K	14.8 lm/W	178 lm/m	G	11 lm/W	131.7 lm/m	G	9.1 lm/W	109.2 lm/m	G
4000 K	15.2 lm/W	182.7 lm/m	G	11.3 lm/W	135.3 lm/m	G	9.3 lm/W	111.5 lm/m	G
5000 K	15.2 lm/W	182.7 lm/m	G	11.3 lm/W	135.3 lm/m	G	9.2 lm/W	110.4 lm/m	G
6500 K	14.6 lm/W	175.6 lm/m	G	10.8 lm/W	129.3 lm/m	G	8.9 lm/W	107.1 lm/m	G

Grade KE (3rd Tier) · 19.2W/m

Grade KE (3rd Tier) · 19.2W/m — measured at 19.2 W/m: luminous efficacy (lm/W), luminous flux (lm/m) and ErP energy class per CCT and CRI grade.
CCT (K)	Ra 80 — Luminous Efficacy (lm/W)	Ra 80 — Luminous Flux (lm/m)	Ra 80 — ErP Energy Class	Ra 90 — Luminous Efficacy (lm/W)	Ra 90 — Luminous Flux (lm/m)	Ra 90 — ErP Energy Class	Full Spectrum (Ra 95+) — Luminous Efficacy (lm/W)	Full Spectrum (Ra 95+) — Luminous Flux (lm/m)	Full Spectrum (Ra 95+) — ErP Energy Class
1900 K	11 lm/W	211.2 lm/m	G	7.9 lm/W	151.6 lm/m	G	—	—	—
2300 K	12.2 lm/W	234.7 lm/m	G	8.8 lm/W	169.7 lm/m	G	7.3 lm/W	140.8 lm/m	G
2700 K	13.3 lm/W	254.5 lm/m	G	9.5 lm/W	182.3 lm/m	G	7.7 lm/W	148 lm/m	G
3000 K	13.9 lm/W	267.1 lm/m	G	10.2 lm/W	196.7 lm/m	G	8.4 lm/W	160.6 lm/m	G
3500 K	14.1 lm/W	270.8 lm/m	G	10.4 lm/W	200.4 lm/m	G	8.6 lm/W	166.1 lm/m	G
4000 K	14.5 lm/W	278 lm/m	G	10.7 lm/W	205.8 lm/m	G	8.8 lm/W	169.7 lm/m	G
5000 K	14.5 lm/W	278 lm/m	G	10.7 lm/W	205.8 lm/m	G	8.7 lm/W	168 lm/m	G
6500 K	13.9 lm/W	267.1 lm/m	G	10.2 lm/W	196.7 lm/m	G	8.5 lm/W	162.9 lm/m	G

Modelos relacionados nesta série

See every model in Neon LED Strip Series or narrow to Side Bend. Compare wattage, lumen output and run length in the ProCalc parameter library, or request OEM/ODM pricing on the custom manufacturing page.

Perguntas Frequentes

Quais são as principais vantagens do silicone utilizado neste Neon flexível de LED?

O silicone de alto desempenho garante uma estrutura molecular estável, evitando descoloração e envelhecimento, além de oferecer resistência superior aos fatores ambientais.

Este Neon flexível de LED pode ser instalado em ambientes externos?

Sim, com grau de proteção IP67, o 0612S-EE é totalmente protegido contra poeira e imersão em água, tornando-o ideal para uso interno e externo.

Qual é o comprimento contínuo máximo para instalação?

O comprimento contínuo máximo deste Neon flexível de LED em silicone 0612S-EE de 24V é de 5 metros, garantindo desempenho e qualidade de luz consistentes.

Quais são as principais especificações do #0612S-EE?

Neon flexível de LED em silicone 0612 | 6*12mm | 24V | 120LEDs | 50mm/corte | #0612S-EE: LEDs 2835, 120, 24V, FPCB de 8mm, folha de cobre de 3oz, potência de 2.8~28.8W, unidade de corte de 6LEDs/50mm. Arquivos fotométricos, diagramas de ligação e relatórios de ensaio estão disponíveis no bloco de downloads desta página.

Qual Driver / Fonte de Alimentação de LED e comprimento de trecho são adequados para o #0612S-EE?

O Neon flexível de LED em silicone 0612 | 6*12mm | 24V | 120LEDs | 50mm/corte | #0612S-EE é um produto de tensão constante de 24V, portanto, utilize um Driver / Fonte de Alimentação de LED de tensão constante de 24V com certificação CE ou UL e potência nominal cerca de 20% acima da carga conectada. O comprimento máximo de um único trecho é de 5m. Alimentação por uma entrada: 5m / por duas entradas: 10m. A alimentação pelas duas extremidades ou pelo ponto intermediário reduz pela metade a distância percorrida no cobre e reduz a queda de tensão para aproximadamente um quarto.

Engineering & selection guide

Bending limits, IP selection, voltage drop, cutting and the full buyer Q&A for this family are kept on the series page.

LED neon flex selection guide — bend direction and radius, IP rating for facade, pool and wet areas, cutting and feed planning
LED strip engineering selection handbook