Fita de LED 2110 de Alta Densidade (#6016)

Visão Geral

Fita de LED 2110 de Alta Densidade | 8mm | 24V | 336LEDs | 62.5mm/corte | #6016 faz parte da série de Fitas SMD RGB da DENO, desenvolvida com base em Fitas de LED RGB. Especificações principais: 2110, 336, 24V, PCB 8, FPCB com cobre de 2oz, cortável a cada 21LEDs/62.5mm. Cada rolo é produzido na linha rolo a rolo da DENO com FPCB de cobre de pureza 99.9% e é fornecido em conformidade com CE, UL e RoHS para projetos arquitetônicos, de varejo e de hotelaria. Configurações OEM e ODM de comprimento, temperatura de cor e impermeabilização estão disponíveis sob consulta.

Descrição

Construída com LEDs SMD 2110 de Alta Densidade em uma PCB de cobre de 8mm e 2oz, esta Fita de LED de tensão constante de 24V oferece iluminação linear consistente. O circuito permite cortes a cada 62.5mm, em seções de 21 LEDs, oferecendo flexibilidade precisa de instalação para iluminação arquitetônica personalizada e aplicações em sancas. Projetado com um amplo ângulo de abertura de 120 graus e capacidade de dimerização total, o sistema suporta uma faixa de potência de 5.7W a 23W. Disponível para fornecimento de projetos no atacado diretamente da fábrica, este módulo de iluminação durável opera com segurança em uma faixa de temperatura ambiente de -25°C a 40°C.

Especificações

Aplicações

• Cove, wall-wash & perimeter lighting — Coves, recesses, wall-wash details and ceiling perimeters where a continuous, uniform line of light is required.
• Showroom & hospitality display lighting — Shelving, display cases, reception desks and signage backlighting in shops, showrooms and hospitality spaces.
• Kitchen & wardrobe under-cabinet lighting — Kitchen, wardrobe and furniture task lighting where the strip stays hidden and only the light is seen.

Acessórios recomendados e peças compatíveis

• DL-1215 — 12x15mm Surface Mount LED Channel — Tall U Shape Aluminum Profile: Accepts LED strips up to 8mm wide.
• DL-1313HX-M — 13x13mm Magnetic Cabinet LED Channel — Tool-Free Corner Aluminum Profile: Accepts LED strips up to 8mm wide.
• DL-1408 HX — 14x8mm Surface Mount LED Channel — Slim Aluminum Profile for 8mm Strip: Accepts LED strips up to 8mm wide.
• DN-PSU-100 — 24V 100W Class-2 LED Driver · High Efficiency: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
• DN-PSU-150 — 24V 150W Class-2 LED Driver · Premium: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
• DN-PSU-60 — 24V 60W Class-2 LED Driver · Constant Voltage: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
• V1 — 5-36VDC 1-Channel * 8A RF+Push Dimming Controller | V1: Matched by input voltage range and colour channels.

High-Power LED Strip: Heat Dissipation & Aluminum Channel Guide

At up to 23W/m, 6016 is a high-power SMD LED strip. Above roughly 14.4W/m the tape can no longer shed its own heat through the FPC alone — an aluminum channel is part of the luminaire, not an accessory.

Why high-wattage strips need a heat sink

• Aluminum conducts heat roughly 30× faster than the plastics, MDF or gypsum a strip is usually stuck to, so a bare high-power run traps heat under the tape.
• LED lifetime (LM-80 / TM-21) is driven by solder-point temperature Tc. Keeping Tc inside the datasheet limit — DENO strips are rated Tc ≤ 75°C — is what preserves the rated L70 lifetime and colour stability.
• Never run 14.4W/m or more coiled on the reel, inside a sealed plastic diffuser, or directly on wood, wallpaper or foam.

Sizing rule: FPC width vs channel inner width

• Channel inner width ≥ FPC width + 2mm. This strip is 8mm wide, so it needs at least 10mm of inner width.
• The 2mm clearance absorbs extrusion tolerance and lets the tape be seated or replaced without scraping the side walls or the wiring.
• A frosted or opal PC cover then diffuses the higher lumen output into an even, dot-free line instead of visible hot spots.

Aluminum channels that fit this strip

• Perfil para LED de Sobrepor 12x15mm · fits ≤8mm strip
• Canal de LED de embutir de 14.2x9.8mm com aba · fits ≤8mm strip
• Canal de LED para Sobrepor de 14x8mm · fits ≤8mm strip
• Canaleta magnética para LED em armários 13x13mm · fits ≤8mm strip
• Perfil de Alumínio Slim de Embutir · PCB de 8mm · fits ≤8mm strip
• Canaleta magnética para LED 14x8mm · fits ≤8mm strip

Recommended LED Channels

Mount this LED strip in a DENO LED aluminum profile for heat dissipation, physical protection and diffused, dot-free output.

This strip is 8mm wide, so it needs a channel with at least 10mm inner width (8mm + 2mm clearance). Every profile below meets that.

• Perfil para LED de Sobrepor 12x15mm · fits ≤8mm strip
• Canal de LED de embutir de 14.2x9.8mm com aba · fits ≤8mm strip
• Canal de LED para Sobrepor de 14x8mm · fits ≤8mm strip
• Canaleta magnética para LED em armários 13x13mm · fits ≤8mm strip

Modelos relacionados nesta série

• Fita de LED Clássica 2110 (#5965)
• Fita de LED PU 2110 ultraestreita de Alta Densidade (#9677-PU)
• Fita de LED 2110 com Temperatura de Cor (CCT) Ajustável (#6017)
• Fita de LED 2110 de Alta Densidade (#8734)
• Fita de LED 2110 Ultraestreita (#5966)
• Fita de LED 2110 de Alta Densidade (#3850)
• Fita de LED 2110 com Temperatura de Cor (CCT) Ajustável (#6015)
• Fita de LED 2216 Clássica (#6012)

See every model in SMD LED Strip Series or narrow to 2110. Compare wattage, lumen output and run length in the ProCalc parameter library, or request OEM/ODM pricing on the custom manufacturing page.

Perguntas Frequentes