Fita de LED 2216 com Temperatura de Cor (CCT) Ajustável Vermelho+Branco (#17353)

Visão Geral

A Fita de LED 2216 com Temperatura de Cor (CCT) ajustável Vermelho+Branco | 8mm | 24V | 240LEDs | 50mm/corte | #17353 faz parte da série de Fitas SMD Especiais da DENO, desenvolvida para aplicações especiais de Fitas de LED. Principais especificações: 2216, 240 LEDs/m, 24V, PCB de 8, FPCB com cobre de 3oz, cortável a cada 12LEDs/50mm. Cada rolo é produzido na linha roll-to-roll da DENO com FPCB de cobre com pureza de 99.9% e fornecido em conformidade com CE, UL e RoHS para projetos de arquitetura, varejo e hotelaria. Configurações OEM e ODM de comprimento, Temperatura de Cor (CCT) e impermeabilização estão disponíveis sob consulta.

Descrição

Com chips SMD 2216 de Alta Densidade, esta Fita de LED com Temperatura de Cor (CCT) ajustável combina diodos vermelhos e brancos para efeitos dinâmicos de iluminação arquitetônica em duas cores. Projetada com 240 LEDs por metro e ângulo de abertura de 120 graus, a PCB de 8mm garante distribuição de luz suave e uniforme ao longo de trechos contínuos. O design de tensão constante de 24V opera com eficiência entre 12W e 19.2W por metro, com pontos de corte precisos a cada 50mm para instalações sob medida. Construída com folha de cobre reforçada de 3oz, esta fita totalmente dimerizável proporciona gerenciamento térmico superior e estabilidade elétrica em ambientes comerciais. A DENO fornece estas fitas flexíveis versáteis com suporte OEM direto da fábrica e embalagens personalizadas para fornecimento confiável no atacado para projetos.

Especificações

Aplicações

• Cove, wall-wash & perimeter lighting — Coves, recesses, wall-wash details and ceiling perimeters where a continuous, uniform line of light is required.
• Showroom & hospitality display lighting — Shelving, display cases, reception desks and signage backlighting in shops, showrooms and hospitality spaces.
• Kitchen & wardrobe under-cabinet lighting — Kitchen, wardrobe and furniture task lighting where the strip stays hidden and only the light is seen.
• Hotel & residential tunable-white scenes — Hotel rooms, residential living areas and meeting spaces where warm evening light and neutral daytime light are both required from one fixture.

Acessórios recomendados e peças compatíveis

• DL-1215 — 12x15mm Surface Mount LED Channel — Tall U Shape Aluminum Profile: Accepts LED strips up to 8mm wide.
• DL-1313HX-M — 13x13mm Magnetic Cabinet LED Channel — Tool-Free Corner Aluminum Profile: Accepts LED strips up to 8mm wide.
• DL-1408 HX — 14x8mm Surface Mount LED Channel — Slim Aluminum Profile for 8mm Strip: Accepts LED strips up to 8mm wide.
• DN-PSU-100 — 24V 100W Class-2 LED Driver · High Efficiency: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
• DN-PSU-150 — 24V 150W Class-2 LED Driver · Premium: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
• DN-PSU-60 — 24V 60W Class-2 LED Driver · Constant Voltage: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
• V2 — 12-24VDC 2-Channel * 5A Color Temperature Controller | V2: Matched by input voltage range and colour channels.

High-Power LED Strip: Heat Dissipation & Aluminum Channel Guide

At up to 19.2W/m, 17353 is a high-power SMD LED strip. Above roughly 14.4W/m the tape can no longer shed its own heat through the FPC alone — an aluminum channel is part of the luminaire, not an accessory.

Why high-wattage strips need a heat sink

• Aluminum conducts heat roughly 30× faster than the plastics, MDF or gypsum a strip is usually stuck to, so a bare high-power run traps heat under the tape.
• LED lifetime (LM-80 / TM-21) is driven by solder-point temperature Tc. Keeping Tc inside the datasheet limit — DENO strips are rated Tc ≤ 75°C — is what preserves the rated L70 lifetime and colour stability.
• Never run 14.4W/m or more coiled on the reel, inside a sealed plastic diffuser, or directly on wood, wallpaper or foam.

Sizing rule: FPC width vs channel inner width

• Channel inner width ≥ FPC width + 2mm. This strip is 8mm wide, so it needs at least 10mm of inner width.
• The 2mm clearance absorbs extrusion tolerance and lets the tape be seated or replaced without scraping the side walls or the wiring.
• A frosted or opal PC cover then diffuses the higher lumen output into an even, dot-free line instead of visible hot spots.

Aluminum channels that fit this strip

• Perfil para LED de Sobrepor 12x15mm · fits ≤8mm strip
• Canal de LED de embutir de 14.2x9.8mm com aba · fits ≤8mm strip
• Canal de LED para Sobrepor de 14x8mm · fits ≤8mm strip
• Canaleta magnética para LED em armários 13x13mm · fits ≤8mm strip
• Perfil de Alumínio Slim de Embutir · PCB de 8mm · fits ≤8mm strip
• Canaleta magnética para LED 14x8mm · fits ≤8mm strip

Recommended LED Channels

Mount this LED strip in a DENO LED aluminum profile for heat dissipation, physical protection and diffused, dot-free output.

This strip is 8mm wide, so it needs a channel with at least 10mm inner width (8mm + 2mm clearance). Every profile below meets that.

• Perfil para LED de Sobrepor 12x15mm · fits ≤8mm strip
• Canal de LED de embutir de 14.2x9.8mm com aba · fits ≤8mm strip
• Canal de LED para Sobrepor de 14x8mm · fits ≤8mm strip
• Canaleta magnética para LED em armários 13x13mm · fits ≤8mm strip

Modelos relacionados nesta série

• Fitas de LED em PU da Série Clássica (#1688 PU)
• Fita de LED 2216 de Alta Densidade (#8227-N)
• Fita de LED 2216 de Corrente Constante, Alto Fluxo Luminoso, Alta Densidade e Alta Eficácia Luminosa (#9426)
• Fita de LED 2216 de Alta Densidade (#15098-N)
• Fita de LED Monocromática 2216 (#15926-N)
• Fita de LED 2216 de densidade ultra-alta com microcortes (#14158-N)
• Fitas de LED PU (#2783-PU)
• Fita de LED 2216 de Alta Densidade (#17000-N)

See every model in SMD LED Strip Series or narrow to 2216. Compare wattage, lumen output and run length in the ProCalc parameter library, or request OEM/ODM pricing on the custom manufacturing page.

Perguntas Frequentes