Fita de LED 2020 RGB (#16829-N)

Visão Geral

Fita de LED RGB 2020 | 10mm | 24V | 280LEDs | 25mm/corte | #16829-N faz parte da série de Fitas de LED de Alta Densidade da DENO, desenvolvida com foco em Fitas de LED de densidade ultra-alta. Especificações principais: 2020, 280, 24V, 10 PCB, FPCB de cobre de 3oz, corte a cada 7LEDs/25mm. Cada rolo é produzido na linha roll-to-roll da DENO com FPCB de cobre com pureza de 99.9% e é fornecido em conformidade com CE, UL e RoHS para projetos de arquitetura, varejo e hotelaria. Configurações OEM e ODM de comprimento, temperatura de cor e impermeabilização estão disponíveis sob consulta.

Descrição

Projetada com chips SMD RGB 2020 miniaturizados, esta Fita de LED de Alta Densidade com 280 LEDs por metro proporciona mistura uniforme de cores em projetos de iluminação arquitetônica. Operando com um circuito de tensão constante de 24V e uma robusta PCB com folha de cobre de 3oz, a fita permite cortes precisos em campo a cada 25mm. Com amplo ângulo de abertura de 120 graus e capacidade de dimerização suave, esta fita oferece emissão equilibrada de cores e mistura de branco RGB sem distorções. Construídas sobre uma placa de circuito de 10mm de largura, estas fitas estão disponíveis diretamente da fábrica para fornecimento no atacado a projetos e instalações decorativas comerciais.

Especificações

Aplicações

• Cove, wall-wash & perimeter lighting — Coves, recesses, wall-wash details and ceiling perimeters where a continuous, uniform line of light is required.
• Showroom & hospitality display lighting — Shelving, display cases, reception desks and signage backlighting in shops, showrooms and hospitality spaces.
• Kitchen & wardrobe under-cabinet lighting — Kitchen, wardrobe and furniture task lighting where the strip stays hidden and only the light is seen.
• Entertainment & media-facade colour scenes — Entertainment venues, media facades, gaming rooms and branded retail installs driven by DMX/SPI or standard RGB controllers.

Acessórios recomendados e peças compatíveis

• DL-1003 — 19.1x8mm Surface Mount LED Channel — Dotless Aluminum Profile for 240 LEDs/m Strip: Accepts LED strips up to 10mm wide.
• DL-1103-1 — 16x13mm Surface Mount LED Channel — Aluminum Profile for 10mm LED Strip: Accepts LED strips up to 10mm wide.
• DL-1510 HX-F — 15x9.9mm Recessed LED Channel with Flange — Flush Mount Aluminum Profile: Accepts LED strips up to 10mm wide.
• DN-PSU-100 — 24V 100W Class-2 LED Driver · High Efficiency: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
• DN-PSU-150 — 24V 150W Class-2 LED Driver · Premium: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
• DN-PSU-60 — 24V 60W Class-2 LED Driver · Constant Voltage: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.

High-Power LED Strip: Heat Dissipation & Aluminum Channel Guide

At up to 14.4W/m, 16829-N is a high-power SMD LED strip. Above roughly 14.4W/m the tape can no longer shed its own heat through the FPC alone — an aluminum channel is part of the luminaire, not an accessory.

Why high-wattage strips need a heat sink

• Aluminum conducts heat roughly 30× faster than the plastics, MDF or gypsum a strip is usually stuck to, so a bare high-power run traps heat under the tape.
• LED lifetime (LM-80 / TM-21) is driven by solder-point temperature Tc. Keeping Tc inside the datasheet limit — DENO strips are rated Tc ≤ 75°C — is what preserves the rated L70 lifetime and colour stability.
• Never run 14.4W/m or more coiled on the reel, inside a sealed plastic diffuser, or directly on wood, wallpaper or foam.

Sizing rule: FPC width vs channel inner width

• Channel inner width ≥ FPC width + 2mm. This strip is 10mm wide, so it needs at least 12mm of inner width.
• The 2mm clearance absorbs extrusion tolerance and lets the tape be seated or replaced without scraping the side walls or the wiring.
• A frosted or opal PC cover then diffuses the higher lumen output into an even, dot-free line instead of visible hot spots.

Aluminum channels that fit this strip

• Canal de LED de Embutir de 22x12mm com Aba · fits ≤10mm strip
• Canal de LED de Embutir de 15x9.9mm com Aba · fits ≤10mm strip
• Canal de LED de embutir raso de 17x7mm com aba · fits ≤10mm strip
• Canaleta para LED de sobrepor 17x15mm · fits ≤10mm strip
• Canal de LED para Sobrepor de 16x13mm · fits ≤10mm strip
• Canaleta larga para LED de sobrepor 20x15mm · fits ≤10mm strip

Recommended LED Channels

Mount this LED strip in a DENO LED aluminum profile for heat dissipation, physical protection and diffused, dot-free output.

This strip is 10mm wide, so it needs a channel with at least 12mm inner width (10mm + 2mm clearance). Every profile below meets that.

• Canal de LED de Embutir de 22x12mm com Aba · fits ≤10mm strip
• Canal de LED de Embutir de 15x9.9mm com Aba · fits ≤10mm strip
• Canal de LED de embutir raso de 17x7mm com aba · fits ≤10mm strip
• Canaleta para LED de sobrepor 17x15mm · fits ≤10mm strip

Modelos relacionados nesta série

• Fita de LED 2020 Rolo a Rolo (#16778)

See every model in SMD LED Strip Series or narrow to 2020. Compare wattage, lumen output and run length in the ProCalc parameter library, or request OEM/ODM pricing on the custom manufacturing page.

Perguntas Frequentes