Fita de LED Azul Ultraestreita 1515 (#16440)

Visão Geral

5mm | 12V | 420LEDs | 15W | 14.283cut | #16440 | Fita de LED Azul Ultraestreita 1515 faz parte da série de Fitas SMD de Microcorte da DENO, desenvolvida com foco em Fita de LED de microcorte. Especificações principais: 1515, 420LEDs/m, 12V, PCB de 5mm, FPCB com cobre de 3oz, corte a cada 6LEDs/14.285mm, IP20/IP65/IP67/IP68, IRC (CRI) Ra≥80. Cada rolo é produzido na linha rolo a rolo da DENO com FPCB de cobre com pureza de 99.9% e é fornecido em conformidade com CE, UL e RoHS para projetos de arquitetura, varejo e hotelaria. Configurações OEM e ODM de comprimento, temperatura de cor e impermeabilização estão disponíveis sob consulta.

Descrição

A PCB ultraestreita de 5mm, projetada com chips SMD 1515 de Alta Densidade, proporciona emissão contínua de luz azul para instalações de iluminação arquitetural em espaços restritos. Com 420 LEDs por metro e uma unidade de corte precisa de 14.285mm, esta fita de tensão constante garante integração contínua e flexibilidade de dimensionamento no local. A compatibilidade total de dimerização com sistemas de controle padrão PWM, DALI e 0-10V permite o gerenciamento preciso da iluminação azul em diversos espaços comerciais. Disponível com graus de proteção ambiental de IP20 a IP68 para atender aos requisitos de comprimentos personalizados OEM e fornecimento no atacado direto da fábrica para projetos.

Especificações

Aplicações

• Cove, wall-wash & perimeter lighting — Coves, recesses, wall-wash details and ceiling perimeters where a continuous, uniform line of light is required.
• Showroom & hospitality display lighting — Shelving, display cases, reception desks and signage backlighting in shops, showrooms and hospitality spaces.
• Kitchen & wardrobe under-cabinet lighting — Kitchen, wardrobe and furniture task lighting where the strip stays hidden and only the light is seen.
• Ultra-narrow 5mm channels & shadow gaps — Fits shadow-gap details, slim profiles and joinery grooves that cannot take a standard 8–10mm strip.

Acessórios recomendados e peças compatíveis

• DL-0809HX-F — 8.89x7.79mm Mini Recessed LED Channel with Flange — Trimless Aluminum Profile for 5mm Strip: Accepts LED strips up to 5mm wide.
• DL-0909HX-M — 9x9mm Magnetic LED Channel — Tool-Free Aluminum Profile for Shelf Lighting: Accepts LED strips up to 5mm wide.
• DL-1010HX-V — 10x10mm V Shape Corner LED Channel — 45 Degree Aluminum Profile for Cabinets: Accepts LED strips up to 5mm wide.
• V1 — 5-36VDC 1-Channel * 8A RF+Push Dimming Controller | V1: Matched by input voltage range and colour channels.

High-Power LED Strip: Heat Dissipation & Aluminum Channel Guide

At up to 14.4W/m, 16440 is a high-power SMD LED strip. Above roughly 14.4W/m the tape can no longer shed its own heat through the FPC alone — an aluminum channel is part of the luminaire, not an accessory.

Why high-wattage strips need a heat sink

• Aluminum conducts heat roughly 30× faster than the plastics, MDF or gypsum a strip is usually stuck to, so a bare high-power run traps heat under the tape.
• LED lifetime (LM-80 / TM-21) is driven by solder-point temperature Tc. Keeping Tc inside the datasheet limit — DENO strips are rated Tc ≤ 75°C — is what preserves the rated L70 lifetime and colour stability.
• Never run 14.4W/m or more coiled on the reel, inside a sealed plastic diffuser, or directly on wood, wallpaper or foam.

Sizing rule: FPC width vs channel inner width

• Channel inner width ≥ FPC width + 2mm. This strip is 5mm wide, so it needs at least 7mm of inner width.
• The 2mm clearance absorbs extrusion tolerance and lets the tape be seated or replaced without scraping the side walls or the wiring.
• A frosted or opal PC cover then diffuses the higher lumen output into an even, dot-free line instead of visible hot spots.

Aluminum channels that fit this strip

• Canal Magnético para LED de 9x9mm · fits ≤5mm strip
• Canaleta de LED de canto em V 10x10mm · fits ≤5mm strip
• Canal de Canto para LED em V 13x13mm · fits ≤5mm strip
• Canal LED estreito de embutir de 15.2x10.4mm com aba · fits ≤6mm strip
• Canal LED de canto em V de 16x16mm · fits ≤6mm strip
• Canal para LED de Sobrepor de 12x8mm · fits ≤6mm strip

Recommended LED Channels

Mount this LED strip in a DENO LED aluminum profile for heat dissipation, physical protection and diffused, dot-free output.

This strip is 5mm wide, so it needs a channel with at least 7mm inner width (5mm + 2mm clearance). Every profile below meets that.

• Canal Magnético para LED de 9x9mm · fits ≤5mm strip
• Canaleta de LED de canto em V 10x10mm · fits ≤5mm strip
• Canal de Canto para LED em V 13x13mm · fits ≤5mm strip
• Canal LED estreito de embutir de 15.2x10.4mm com aba · fits ≤6mm strip

Modelos relacionados nesta série

• Fita de LED 1515 de Alta Densidade com 2 Fileiras a 45° (#18241)
• Fita de LED 1515 com Temperatura de Cor (CCT) Ajustável (#16828-N)
• Fita de LED 1515 Branca com Efeito de Fluxo Sequencial (#16673-N)
• Fita de LED de Alta Densidade 1515 (#16662-N)
• Fita de LED 1515 (#16614-N)
• Fita de LED Multilinha de Alta Densidade com 5 Fileiras (#16710)

See every model in SMD LED Strip Series or narrow to 1515. Compare wattage, lumen output and run length in the ProCalc parameter library, or request OEM/ODM pricing on the custom manufacturing page.

Perguntas Frequentes