Fita de LED RGB 2216 de Microcorte (#14840)

Visão Geral

10mm | 24V | 300LEDs | 10mm/cut | #14840 | Fita de LED RGB 2216 de Microcorte faz parte da série de Fitas de LED de Alta Densidade da DENO, desenvolvida com base em Fitas de LED de densidade ultra-alta. Principais especificações: 2216, 300, 24V, PCB de 10, FPCB de cobre de 3oz, cortável a cada 3LEDs/10mm, IP20. Cada rolo é produzido na linha rolo a rolo da DENO com FPCB de cobre de 99.9% de pureza e fornecido em conformidade com CE, UL e RoHS para projetos de arquitetura, varejo e hotelaria. Configurações OEM e ODM de comprimento, Temperatura de Cor (CCT) e impermeabilização estão disponíveis sob consulta.

Descrição

Esta Fita de LED RGB 2216 de Microcorte de 24V apresenta 300 LEDs por metro para proporcionar mistura de cores suave e sem pontos visíveis. Projetada com um intervalo de corte ultracurto de 10mm, esta fita flexível permite o dimensionamento preciso dentro de tubos de silicone para neon e Perfis de Alumínio. Uma PCB robusta de 10mm de largura com cobre de 3oz garante gerenciamento térmico eficiente e operação estável em tensão constante em instalações comerciais. Ideal para iluminação dinâmica de sancas, iluminação de armários e retroiluminação de sinalização, integra-se perfeitamente aos controladores RGB padrão do mercado. Oferecemos personalização OEM diretamente da fábrica para fornecimento de projetos no atacado, incluindo opções de potência personalizadas, impressão serigráfica e etiquetagem sob medida.

Especificações

Aplicações

• Cove, wall-wash & perimeter lighting — Coves, recesses, wall-wash details and ceiling perimeters where a continuous, uniform line of light is required.
• Showroom & hospitality display lighting — Shelving, display cases, reception desks and signage backlighting in shops, showrooms and hospitality spaces.
• Kitchen & wardrobe under-cabinet lighting — Kitchen, wardrobe and furniture task lighting where the strip stays hidden and only the light is seen.
• Entertainment & media-facade colour scenes — Entertainment venues, media facades, gaming rooms and branded retail installs driven by DMX/SPI or standard RGB controllers.

Acessórios recomendados e peças compatíveis

• DL-1003 — 19.1x8mm Surface Mount LED Channel — Dotless Aluminum Profile for 240 LEDs/m Strip: Accepts LED strips up to 10mm wide.
• DL-1103-1 — 16x13mm Surface Mount LED Channel — Aluminum Profile for 10mm LED Strip: Accepts LED strips up to 10mm wide.
• DL-1510 HX-F — 15x9.9mm Recessed LED Channel with Flange — Flush Mount Aluminum Profile: Accepts LED strips up to 10mm wide.
• DN-PSU-100 — 24V 100W Class-2 LED Driver · High Efficiency: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
• DN-PSU-150 — 24V 150W Class-2 LED Driver · Premium: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.
• DN-PSU-60 — 24V 60W Class-2 LED Driver · Constant Voltage: Matches the 24V DC input of this strip; size the driver with at least 20% headroom over total load.

High-Power LED Strip: Heat Dissipation & Aluminum Channel Guide

At up to 24W/m, 14840 is a high-power SMD LED strip. Above roughly 14.4W/m the tape can no longer shed its own heat through the FPC alone — an aluminum channel is part of the luminaire, not an accessory.

Why high-wattage strips need a heat sink

• Aluminum conducts heat roughly 30× faster than the plastics, MDF or gypsum a strip is usually stuck to, so a bare high-power run traps heat under the tape.
• LED lifetime (LM-80 / TM-21) is driven by solder-point temperature Tc. Keeping Tc inside the datasheet limit — DENO strips are rated Tc ≤ 75°C — is what preserves the rated L70 lifetime and colour stability.
• Never run 14.4W/m or more coiled on the reel, inside a sealed plastic diffuser, or directly on wood, wallpaper or foam.

Sizing rule: FPC width vs channel inner width

• Channel inner width ≥ FPC width + 2mm. This strip is 10mm wide, so it needs at least 12mm of inner width.
• The 2mm clearance absorbs extrusion tolerance and lets the tape be seated or replaced without scraping the side walls or the wiring.
• A frosted or opal PC cover then diffuses the higher lumen output into an even, dot-free line instead of visible hot spots.

Aluminum channels that fit this strip

• Canal de LED de Embutir de 22x12mm com Aba · fits ≤10mm strip
• Canal de LED de Embutir de 15x9.9mm com Aba · fits ≤10mm strip
• Canal de LED de embutir raso de 17x7mm com aba · fits ≤10mm strip
• Canaleta para LED de sobrepor 17x15mm · fits ≤10mm strip
• Canal de LED para Sobrepor de 16x13mm · fits ≤10mm strip
• Canaleta larga para LED de sobrepor 20x15mm · fits ≤10mm strip

Recommended LED Channels

Mount this LED strip in a DENO LED aluminum profile for heat dissipation, physical protection and diffused, dot-free output.

This strip is 10mm wide, so it needs a channel with at least 12mm inner width (10mm + 2mm clearance). Every profile below meets that.

• Canal de LED de Embutir de 22x12mm com Aba · fits ≤10mm strip
• Canal de LED de Embutir de 15x9.9mm com Aba · fits ≤10mm strip
• Canal de LED de embutir raso de 17x7mm com aba · fits ≤10mm strip
• Canaleta para LED de sobrepor 17x15mm · fits ≤10mm strip

Modelos relacionados nesta série

• Fita de LED Clássica 2835 (#2065)
• Fita de LED 2216 de Alta Densidade com Microcorte (#4831)
• Fita de LED Micro-SMD 2216 de Alta Densidade (#14157-N)

See every model in SMD LED Strip Series or narrow to Micro Cut. Compare wattage, lumen output and run length in the ProCalc parameter library, or request OEM/ODM pricing on the custom manufacturing page.

Perguntas Frequentes